Can the rear shock absorber of Zongshen WEEK8 be adjusted?

1 Answers
LeEmersyn
07/30/25 3:25am
Zongshen WEEK8 rear shock absorber can be adjusted. Classification of shock absorbers: From the perspective of damping materials, there are mainly two types: hydraulic and pneumatic, and there is also a variable damping shock absorber. Function of shock absorbers: Shock absorbers are mainly used to suppress the oscillation after the spring absorbs vibration and rebounds, as well as the impact from the road surface. When passing through uneven road surfaces, although the shock-absorbing spring can filter the vibration of the road surface, the spring itself still has reciprocating motion, and the shock absorber is used to suppress this spring jump. If the shock absorber is too soft, the body will jump up and down; if the shock absorber is too hard, it will bring too much resistance, hindering the normal operation of the spring. In the process of modifying the suspension system, a hard shock absorber should be matched with a hard spring, and the hardness of the spring is closely related to the weight of the vehicle. Therefore, heavier vehicles generally use harder shock absorbers. The device connected to the vibration-damping crankshaft is used to counteract the torsional vibration of the crankshaft.
Was this review help?
10
5
Share
More Forum Discussions

What are the differences between the Corolla Elite Edition and Luxury Edition?

The differences between the Corolla Elite Edition and Luxury Edition: 1. Different engines: The Corolla Elite Edition is equipped with a 1.8L naturally aspirated engine; the Luxury Edition is equipped with a 1.2T turbocharged engine. 2. Different fuel types: The Corolla Elite Edition adopts a hybrid power system; the Luxury Edition uses gasoline power. 3. Different transmission types: The Corolla Elite Edition features an eCVT electronic continuously variable transmission; the Luxury Edition uses a CVT continuously variable transmission. Corolla is a brand under Toyota Motor Corporation. The front design adopts a trapezoidal structure, with the Toyota emblem at the center, and the front grille and headlights extending to both sides and slightly rising, fully embodying Toyota's Keen Look family design style, which is highly impactful and sharp. The car combines new projection headlights with LED daytime running lights, giving the front face a more avant-garde technological feel. The body dimensions are 4630mm in length, 1775mm in width, and 1480mm in height.
20
3
Share

What are the differences between dynamic balance and static balance?

Dynamic balance and static balance differ as follows: 1. Different in nature: Static balance is corrected on a single correction plane of the rotor, with the remaining unbalance after correction ensuring that the rotor remains within the allowable unbalance range when static, hence it is also known as single-plane balance. Dynamic balance is corrected simultaneously on two correction planes of the rotor, with the remaining unbalance after correction ensuring that the rotor remains within the allowable unbalance range during operation, hence it is also known as two-plane balance. 2. Different focus: In static balance, the center of gravity of the wheel aligns with the axis of rotation, allowing it to stop at any position. If a wheel consistently stops at the same position each time, it indicates static imbalance. Dynamic balance is a phenomenon observed during the rotation of the wheel. Due to the asymmetry of mass relative to the wheel's symmetrical plane, when the wheel rotates at high speed, it swings from side to side, which is the phenomenon of dynamic imbalance.
20
4
Share

What are the penalties for being fully at fault in a rear-end collision? Will points be deducted?

Generally, no points will be deducted. Relevant regulations: A rear-end collision where one is fully at fault is considered a traffic accident. According to the Road Traffic Safety Law, compensation must be provided to the other party involved. Additionally, under relevant laws and regulations, after a traffic accident occurs, the traffic management department of the public security authority will no longer impose penalties for traffic violations. Precautions for rear-end collisions: Protect the scene: In the event of a rear-end collision on the road, the driver should immediately stop the vehicle and protect the scene; Negotiate or report to the police: If a rear-end collision on the road does not result in personal injury, the parties involved may negotiate compensation matters on their own; If personal injury occurs, the driver should immediately rescue the injured and promptly report to the traffic police on duty or the traffic management department of the public security authority.
4
3
Share

Can the driver be clearly seen in the photo of running a red light?

Running a red light photo cannot clearly show the driver. The electronic eye uses induction lines to sense the pressure from vehicles on the road, collects the signals through sensors to the central processor, and starts or shuts down the electronic photo system within the traffic light cycle. The working principle of the electronic eye capturing red light running: within the same time interval (red light cycle), if two pulse signals are generated simultaneously, it is considered "valid". If the red light is on, the front wheels cross the line, but the rear wheels do not, only one pulse is generated. When there are no two consecutive pulses, no photo is taken. At the same time, at least three pictures of the violating vehicle are taken: one is an instant violation picture, one is a license plate recognition picture, and one is a panoramic picture (all three pictures are taken instantly). The criteria for determining red light running: if the vehicle just crosses the stop line when the light is red but stops immediately, this kind of red light running will not be penalized. However, if there is obvious movement after crossing the line, it will be penalized.
5
5
Share

What is the cylinder numbering arrangement for BMW?

BMW cylinder numbering arrangement: Starting from the front of the car on the left side are cylinders 1234, and on the right side are 5678. That is, the side with the oil filler cap is cylinders 1234, and the other end is 5678. Definition of cylinder count: Cylinder count refers to the number of cylinders in an engine. Common cylinder counts for automotive engines are 3, 4, 6, 8, 10, and 12 cylinders. Engines with displacement below 1 liter typically use three cylinders, 1-2.5 liters generally use four cylinders, around 3 liters usually have six cylinders, around 4 liters have eight cylinders, and above 5.5 liters use twelve cylinders. Relationship between cylinder count and displacement: Generally speaking, with the same cylinder bore diameter, more cylinders mean larger displacement and higher power output. With the same displacement, more cylinders allow for smaller bore diameters, enabling higher engine speeds and thus achieving greater power output.
16
3
Share

What is the Difference Between Pearl White and Universal White?

The differences between pearl white and universal white are as follows: 1. Material: The white paint is a solid color paint, which cannot be made into metallic paint due to its natural properties and does not emit fluorescent powder under sunlight. Pearl white paint contains pearl powder, making it appear brighter and more upscale under sunlight compared to regular car paint. 2. Cost: Pearl powder is much more expensive than regular paint, and combined with the manufacturing process, it generally incurs higher costs than standard white car paint. Common types of car paint include: 1. Metallic paint: This involves mixing metal powder into regular paint, giving the entire paint surface a metallic texture under sunlight. 2. Pearl paint: This involves mixing mica flakes into regular paint, creating a pearl-like texture under sunlight. 3. Matte paint: Commonly found on high-end vehicles. Matte paint is primarily composed of clear lacquer, mixed with an appropriate amount of matting agent and auxiliary materials. The level of gloss varies depending on the amount of matting agent used. Matte paint offers a soft gloss, smooth and even surface, and resistance to acids, alkalis, water, etc.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.