Can the Rear Seats of Volkswagen Santana Be Folded Down?

1 Answers
OArthur
07/24/25 6:48pm
The rear seats of the Santana cannot be folded down. The rear seats of this model are fixed with screws and can only be removed, not folded. Here is some information about folding rear seats: 1. There are two types of rear seat folding: split-folding rear seats and full-folding rear seats. 2. Split-folding rear seats: Split-folding rear seats refer to the backrests of the rear seats being able to be folded down in a certain ratio. Compared to full-folding rear seats, split-folding offers greater flexibility, allowing only half of the backrest to be folded down for carrying large items while the other half remains usable for seating. 3. Full-folding rear seats: Full-folding rear seats refer to the backrests of the rear seats being a single unit. When more space is needed for larger items, the entire backrest of the rear seats can be folded down to provide additional space.
Was this review help?
4
5
Share
More Forum Discussions

What does the Toyota KDSS chassis mean?

KDSS chassis refers to the electronically controlled kinetic dynamic suspension system. The following is a related introduction: 1. Main function: Its main function is to improve the passability and stability during off-road driving. This system connects the front and rear hydraulic links into a closed system through bidirectional hydraulic pipelines. The two hydraulic links replace the vertical small links on the upper side of the front and rear anti-roll bars respectively, and there is also an accumulator in the middle of the two pipelines. 2. Electronically controlled: The electronically controlled kinetic dynamic suspension system can control the stiffness of the suspension system according to different road conditions, different load masses, and different driving speeds, while adjusting the damping force of the shock absorber. In addition, it can also adjust the height of the body, so that the vehicle's ride comfort and handling stability can achieve a better combination under various driving conditions.
13
3
Share

Is the Audi Q5 body made of aluminum alloy or iron?

Audi Q5 body uses high-cost imported aluminum in multiple areas. The materials used in the body and maintenance methods are as follows: Materials used in the Audi Q5 body: The Audi Q5 does not use aluminum material for the entire body, but high-cost imported aluminum is used in multiple areas. The Q5 features aluminum front and rear five-link suspension materials, which are five times lighter than iron suspensions, resulting in reduced unsprung mass. Additionally, it has aluminum engine hoods and tailgates, and even the brake pedal linkage is made of aluminum alloy. Maintenance of the Audi Q5 body: Do not park the car under direct sunlight for extended periods. Also, regularly clean dust from the door seals to prevent accelerated aging. If the car is left in the sun for too long, it can cause the door seals to age faster, leading to wind noise and impact sounds between the door and door frame.
6
1
Share

What car is the Mustang snake logo?

Wild horse snake logo is Ford Mustang GT500, which is a medium-sized sports car, commonly known as Shelby Cobra. Taking the 2013 Ford Mustang GT500 as an example, it belongs to the sports car category, with body dimensions of: length 4780mm, width 1877mm, height 1400mm, wheelbase of 2720mm, and a fuel tank capacity of 55L. The 2013 Ford Mustang GT500 features a front suspension of MacPherson independent suspension with a stabilizer bar, and a rear suspension of solid axle non-independent suspension. It is equipped with a 5.8L supercharged engine, delivering a maximum horsepower of 671PS, maximum power of 494kW, maximum torque of 855Nm, paired with a 6-speed manual transmission.
15
1
Share

What are the consequences of not scrapping a motorcycle that has reached its end-of-life period?

Motorcycles that have reached their end-of-life period but have not been scrapped will face the following consequences: 1. If the motorcycle owner fails to legally complete the deregistration process, the vehicle management department will not process any new vehicle registration or transfer procedures for them; 2. The vehicle management department will also revoke the registration certificate, license plate, and driving license for those who fail to obtain the inspection qualification mark within the specified period; 3. For those who fail to complete the deregistration procedures within the deadline, a mandatory deregistration notice will be issued. A motorcycle is a flexible and fast means of transportation, powered by a gasoline engine and steered by handlebars to control the front wheel. It can be a two-wheeler or three-wheeler, known for its light weight, agility, and speed, widely used for patrol, passenger and cargo transportation, and as sports equipment.
15
1
Share

What is the capacity of car windshield washer fluid?

Car windshield washer fluid capacity is approximately 1.5 liters. Windshield washer fluids are categorized into summer-use 0°C fluid and winter-use -20°C or -35°C fluid. The functions of windshield washer fluid are: 1. Maintaining clear visibility through the windshield while driving; 2. Extending the lifespan of both the windshield and wiper blades; 3. Preventing window icing in winter; 4. Eliminating static electricity on windows. The method for adding windshield washer fluid is: 1. Activate the wiper switch, causing the fluid to spray from nozzles below the windshield; 2. Continue until nozzles stop spraying, then open the washer fluid reservoir cap to add fluid; 3. Reactivate the wiper switch to clear remaining fluid; 4. When no more fluid sprays out, refill the reservoir and securely close the cap.
18
5
Share

What Causes the Noise When Braking in Reverse?

Reasons for noise when braking in reverse: When braking in reverse, which is opposite to the vehicle's forward direction, there is a certain amount of clearance between the brake pads and the rear end of the bracket. Therefore, during braking, the brake pads impact the rear surface of the bracket, resulting in abnormal noise. The working principle of braking mainly relies on friction. By utilizing the friction between the brake pads and the brake discs, as well as between the tires and the ground, the kinetic energy of the moving vehicle is converted into heat energy through friction, bringing the car to a stop. To mitigate the noise when braking in reverse, a thin layer of lubricating grease can be applied to the parts where the brake pads connect with the brake caliper bracket. This can help improve the phenomenon to some extent.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.