Can the Rear Seats of the Tiggo 8 Be Folded Down?

2 Answers
DelNicole
07/29/25 9:01pm
The rear seats of the Tiggo 8 can be folded down. First, adjust the height of the rear seat headrests and remove them if necessary. Then, retract the rear seat safety belts. Use your hand to pull the unlocking latch at the top of the seat back to unlock it, while simultaneously pulling the seat back forward and folding it down. Once folded, the seat back will be level with the trunk carpet. The Tiggo 8 features a MacPherson strut front suspension and a multi-link independent rear suspension. In terms of power, this vehicle is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156 PS, a maximum power of 115 kW, and a maximum torque of 230 Nm, paired with a 6-speed manual transmission.
Was this review help?
16
3
Share
DelSarah
08/15/25 7:01pm
Yes, I've been driving the Tiggo 8 for almost a year now. The rear seats can definitely be folded down, and the operation is super simple: There's a hidden pull handle on the side of the seat, just give it a gentle tug to fold it flat. After folding, the trunk space instantly doubles from its normal state, easily accommodating large items like camping tents or small furniture. Last time, I even transported a washing machine with no issues. One thing to note is that the surface might be slightly uneven after folding, so it's recommended to lay down a soft pad for comfort. Also, avoid placing overweight items for extended periods to prevent damage. This feature is especially handy for family outings, like weekend trips to the park with kids—strollers or toys can be loaded effortlessly. Overall, the Tiggo 8's design is very thoughtful, and space flexibility is one of its strong points.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

Why Does Car Fuel Consumption Increase in Winter?

Here is an analysis of the reasons for higher car fuel consumption in winter: 1. Due to lower temperatures: In winter, the low temperatures cause the engine to maintain higher RPMs after a cold start. If the driving distance is short, the engine may not reach its optimal operating temperature before reaching the destination. Repeatedly keeping the engine at high RPMs can lead to increased fuel consumption. 2. Operational issues: If the heater is not turned off before shutting down the car the previous day, the heater will start along with the engine the next day, causing a loss of some engine heat. Sometimes, turning on the AC (compressor) at the same time adds extra load to the engine. Prolonged idling to warm up the engine not only increases fuel consumption but also leads to more carbon deposits in the engine.
19
5
Share

Is 80 km/h considered fast for a motorcycle?

If it's not on a highway, it's considered fast. On highways, according to regulations, freight trucks and motorcycles are not allowed to exceed 90 km/h. Motorcycle riding tips: Before riding, check the motorcycle's condition, including the headlights, turn signals, horn, handlebars, etc. Helmets are legally required protective gear. Choose brightly colored clothing, and strictly avoid drunk driving and unlicensed driving. Riding precautions: Drive on the right side and not on the sidewalk. Do not follow too closely; maintain an appropriate distance behind the right rear corner of the vehicle ahead. When overtaking, pass from the left side of the vehicle in front; avoid overtaking on the right or between two parallel vehicles.
17
5
Share

What Causes Vehicle Body Shaking While Driving?

Here are the reasons for vehicle body shaking while driving: 1. Excessive carbon buildup on the fuel injectors and throttle body, or a dirty throttle body. During cold starts, carbon deposits inside the engine absorb some gasoline, resulting in an overly lean combustible mixture, making it difficult to start or causing engine shaking. 2. Tire-related issues, requiring inspection of tire pressure, tire wear, shock absorbers, and other components. It is best to perform a four-wheel alignment and dynamic balance. Additional information: The throttle body is a controllable valve that regulates air intake into the engine, available in traditional cable-operated and electronic throttle types. After entering the intake manifold, the air mixes with gasoline to form a combustible mixture for combustion and power generation. It connects to the air filter at the top and the engine block at the bottom, often referred to as the throat of the automotive engine.
15
1
Share

How much oil should be added to the front suspension of a motorcycle?

For general 125cc or 150cc cross motorcycles, the front suspension oil quantity is about 120 to 150 milliliters. Introduction to suspension oil: Suspension oil, also known as "shock absorber oil". It is a liquid injected into the shock absorbers of aircraft, tanks, automobiles, motorcycles, etc., to reduce their vertical bumping. Function of suspension oil: The shock absorber contains suspension oil, which also includes a certain amount of lubricating oil components. Suspension oil is the hydraulic medium used in hydraulic systems that utilize liquid pressure energy. It plays roles in energy transmission, wear resistance, system lubrication, anti-corrosion, rust prevention, and cooling in hydraulic systems.
2
4
Share

What car brand has a logo featuring a cross and a snake?

A logo featuring a snake and a cross belongs to Alfa Romeo, a renowned Italian manufacturer of cars and sports cars headquartered in Milan. Here is more information about Alfa Romeo: 1. Models: Taking the Alfa Romeo Stelvio as an example, it is a high-performance midsize SUV. 2. Engine: It is equipped with two types of engines, a 2.0-liter turbocharged engine and a 2.9-liter V6 twin-turbocharged engine, both paired with an 8-speed automatic transmission. 3. Dimensions: The Alfa Romeo Stelvio measures 4702mm in length, 1955mm in width, and 1697mm in height, with a wheelbase of 2818mm.
5
1
Share

Why Does the Engine Noise Increase After an Oil Change?

There are several reasons why engine noise may increase after an oil change: 1. Overfilling of oil: When there is too much oil in the engine, it creates unnecessary resistance to the rotation of the crankshaft, affecting power output, increasing fuel consumption, and consequently raising noise levels. 2. Unsuitable oil viscosity: If the oil viscosity is too high, the rotational resistance is greater when the engine is cold, and the lubrication is insufficient, leading to increased noise during cold starts. 3. Severe engine carbon buildup: Oil tends to thin out over time, and carbon deposits accumulate. When new oil is first changed, the engine may not immediately adapt to the oil's viscosity, resulting in louder engine noise.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.