Can the rear seats of the Roewe i5 be folded down?

2 Answers
LeBrielle
07/24/25 2:06pm
The rear seats of the Roewe i5 can be folded down. You can find a pull strap on the backrest of the rear seats near the door. Pulling it will allow you to fold down the rear seats. The Roewe i5 is a compact sedan under the Roewe brand, with body dimensions of 4601 mm in length, 1818 mm in width, and 1489 mm in height, and a wheelbase of 2680 mm. In terms of power, the Roewe i5 is equipped with two engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine. The 1.5-liter naturally aspirated engine has a maximum power of 88 kW and a maximum torque of 150 Nm.
Was this review help?
18
2
Share
DiNorah
08/11/25 8:01am
I recently took my friends out in my Roewe i5, and the rear seats can indeed be folded down, which is particularly convenient for loading luggage. The operation is simple—just find a pull ring near the trunk, give it a tug, and the seats lay flat, instantly expanding the space. It can easily accommodate two large suitcases or a bicycle. The floor is flat after folding, saving the hassle of renting a truck when transporting furniture. This feature of the Roewe i5 is quite practical, especially for those who frequently travel or shop. The seats split in a 40:60 ratio, allowing you to fold only one side while keeping the other side available for passengers, maintaining flexibility. It works seamlessly for daily urban use, such as weekend shopping or moving small items without needing extra equipment. I recommend users give it a try—it enhances the car's practicality without sacrificing comfort, which is well-executed among its peers.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

Can a cut in the tire be repaired?

Tires with significant damage have a low safety factor and should be replaced; repair is not recommended. The following situations also require immediate tire replacement: 1. Deformation of the bead or tread. 2. Long-term low-pressure driving causing excessive tire compression. 3. The tire has been punctured and repaired more than four times. 4. The tire has been corroded by chemicals. Additional information about tires is as follows: 1. The specific replacement cycle for tires depends on their usage, but the service life should not exceed six years. 2. When replacing tires, use tires of the same size, speed rating, and load capacity as the original tires.
3
0
Share

How to Open the Corolla Hood?

The Corolla hood can be opened by pulling the release lever located under the dashboard on the driver's side. After pulling the lever, there is a latch under the hood that needs to be pushed to the left to fully open it. Below are the functions of the hood: 1. Airflow guidance. For objects moving at high speeds through the air, the aerodynamic drag and turbulence generated around the object can directly affect its trajectory and speed. The shape of the hood can effectively adjust the direction of airflow relative to the car's movement and the drag force, reducing the impact of airflow on the vehicle. By guiding the airflow, the aerodynamic drag can be decomposed into beneficial forces, increasing the downforce on the front wheels and enhancing driving stability. The streamlined design of the hood is largely based on this principle. 2. Protection for the engine and surrounding components. Beneath the hood are critical components of the vehicle, including the engine, electrical circuits, fuel system, braking system, and transmission system, all of which are vital to the vehicle. By enhancing the strength and structure of the hood, it can effectively protect these components from adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle operates normally. 3. Aesthetics. The exterior design of a vehicle is a direct reflection of its value, and the hood, as a significant part of the overall appearance, plays a crucial role. A well-designed hood enhances the visual appeal and embodies the concept of the entire vehicle. 4. Assists in driving visibility. 5. Prevents accidents.
9
1
Share

How to Perform Reverse Parking?

Key steps for reverse parking: 1. From the starting point into the garage: After getting into the car, the driver should first adjust the seat and rearview mirrors, fasten the seatbelt, then shift into reverse gear, release the parking brake lever, and start reversing at idle speed. The driver observes the garage through the right rear window. When the black edge of the right rear window aligns with the right line of the garage, turn the steering wheel steadily to the right to its limit. 2. From the garage to the return point: Shift into first gear and drive out of the garage. When the engine hood approaches the road edge line, turn the steering wheel to the left to its limit, and stop when the car is straight. 3. From the return point into the garage: Shift into reverse gear, keep the steering wheel turned left to its limit, and reverse. The driver should pay attention to the left rearview mirror and adjust the direction to guide the rear of the car into the garage. After the car enters the garage, the driver should observe the right rearview mirror. When the entire right line of the garage appears, immediately straighten the steering wheel. Then, shift focus to the left rearview mirror, and stop immediately when the left door handle is level with the garage's bottom line. 4. From the garage to the starting point: Shift into first gear and drive out of the garage. When the engine hood approaches the road edge line, turn the steering wheel to the right to its limit, and stop when the car is straight.
14
2
Share

What Happens When Starting in Third Gear?

Starting in third gear is not good for the clutch or the engine. It can cause clutch slippage, accelerate clutch wear, increase the low-speed load on the engine, and exacerbate wear on the cylinder pistons. Additionally, it can cause wear on the gears inside the transmission. Different gears affect the engine and transmission differently, and drivers can identify the right shifting moment by listening to the engine sound. Generally, a dull engine sound indicates it's time to upshift. Driving in a gear that's too high increases engine pressure, raises fuel consumption, and significantly impacts both the engine and transmission. Moreover, if the engine speed drops below around 1,500 RPM, it's time to downshift.
2
5
Share

How to Inflate a Tubeless Tire That's Leaking Air?

Tubeless tire inflation method: Seal the outer tire and the rim properly, install the valve on the rim, and then you can inflate the tire. If inflating manually, start vigorously to quickly inflate and seal both sides of the tire. After that, install the valve core and inflate to the specified pressure, then tighten the valve core. Finally, check for leaks before installation and use. Tubeless tires, also known as low-pressure tires or pneumatic tires, have high elasticity and wear resistance, along with excellent traction and heat dissipation performance. In recent years, tubeless tires have been increasingly used in bicycles, motorcycles, cars, buses, and trucks.
9
0
Share

Can license plates be transferred?

Reasons why vehicle license plates cannot be transferred: 1. Relevant regulations: According to traffic regulations, license plates cannot be transferred. License plates are state-owned property and do not belong to any individual or group. Vehicle owners only have the right to use the license plate, not ownership, so they cannot be transferred with the vehicle. 2. Ownership of license plates: Second-hand vehicle transactions involve the transfer of vehicle ownership. When processing the transfer, the original license plate and vehicle registration certificate must be reclaimed according to regulations, and a new license plate number must be determined and reissued. For registered motor vehicles whose ownership is transferred, the current owner must apply for transfer registration at the vehicle management office within 30 days from the date of vehicle delivery. 3. Reclamation of license plates: Vehicles can be transferred as long as both parties bring the original and photocopy of the seller's ID card, the original and photocopy of the buyer's ID card (for public vehicles, an organization code certificate is required), and other required documents. However, the license plate number cannot be transferred unless under special circumstances. The original license plate can only be transferred to the new vehicle information of the original owner and cannot be transferred to another person. This means that even if the license plate number is transferred to another vehicle, it still belongs to the original owner within six months, after which the license plate will enter the license plate resource pool. According to Article 52 of the 'Motor Vehicle Registration Regulations', when a motor vehicle undergoes a transfer or cancellation registration, the license plate must be changed. Only vehicles used for freight purposes, such as small trucks, can retain the original license plate.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.