Can the Rear Seats of the Baojun 730 Be Fully Flattened?

2 Answers
McBriella
07/24/25 6:31am
The rear seats of the Baojun 730 cannot be fully flattened. While they can be folded down, they do not lie completely flat. The seats are designed to fold in a split configuration. On the side of the rear seats, there is a thin strap; pulling it allows you to adjust the backrest angle forward or backward. Holding the strap and not letting go will fold the seat down directly. The Baojun 730 is positioned as a compact MPV, featuring a seven-seat layout with a maximum cargo capacity of up to 1680L. The backrests of the rear seats can be folded down in a split manner, offering greater flexibility compared to folding the entire rear seat. This allows for folding down only half of the backrest to accommodate large items while the remaining part can still be used for seating. The dimensions of the Baojun 730 are 4780mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. In terms of power, it is equipped with a 1.5L inline 4-cylinder naturally aspirated engine paired with a 6-speed manual transmission, delivering a maximum power of 82 kW and a maximum torque of 147 Nm.
Was this review help?
8
5
Share
CalebDella
08/11/25 2:13am
I've been driving the Baojun 730 for a while, and the rear seats can indeed be completely flattened, which is quite practical. The flattening process is simple: first push the rear backrest forward, then pull the folding switch under the seat, and the entire seat will lay flat, almost level with the trunk floor, instantly increasing the cargo space. It's very convenient for carrying goods or large luggage, such as during moving or travel when you need to fit bulky items. However, note that there might be small gaps after flattening, so it's advisable to lay a mat to prevent shaking or soiling the seat fabric. This design is quite common in MPV models, and the Baojun 730 does it in a very cost-effective way, suitable for young people like me who enjoy road trips. During long drives, it can even serve as a temporary small bed for rest, but remember to adjust the angle properly to avoid discomfort.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

What does an exclamation mark in the middle of the engine warning light mean?

An exclamation mark inside the engine symbol indicates the engine warning light. There are seven main reasons why it may illuminate: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or their signals are interrupted, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel or oil quality issues: Failure to use the fuel or engine oil specified by the manufacturer may cause engine wear, leading to the warning light illumination. Poor fuel mixture combustion: Incomplete combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Spark plug failure, ignition coil issues, fuel pump malfunction, or clogged fuel lines can all lead to poor combustion. Turbocharger problems: Issues with the intake boost system or turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, often accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake system issues: Problems with the air intake can lead to clogged engine pipes, and in severe cases, trigger the warning light. A dirty or uncleaned air filter can cause intake issues. Exhaust system problems: Exhaust faults may also illuminate the engine warning light. Common causes include faulty rear oxygen sensors, catalytic converter issues, or exhaust camshaft and bearing failures. The catalytic converter is the most frequent culprit, often damaged by leaded gasoline, improper lubricant additives, physical impacts, or fuel system malfunctions. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or the anti-theft controller doesn't match the engine ECU, the system may prevent normal engine operation while illuminating the warning light. If the engine warning light illuminates, follow these steps: First, check if the engine is running normally. If there are symptoms like shaking or black smoke, avoid restarting the engine. Never restart if the light is red. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the ON position (without engaging the clutch). The vehicle will perform a self-check. Observe if the warning light turns off after 5-10 seconds. If the light remains on, visit a service center promptly. Technicians can use diagnostic tools to read trouble codes and perform targeted repairs.
4
4
Share

How to Adjust the Time on a Levin?

To adjust the time on a Levin, follow these steps: 1. Insert the car key into the ignition; 2. Turn the key to power on the vehicle; 3. Tap the vehicle's central control to enter the multimedia settings; 4. Select the time and date option, then touch to adjust the time and date, and tap 'Done' to confirm. Taking the 2019 Levin as an example, it is a compact car with a MacPherson independent front suspension and an E-type multi-link independent rear suspension. Its dimensions are: length 4640mm, width 1780mm, height 1455mm, wheelbase 2700mm, fuel tank capacity 43L, and curb weight 1410kg.
9
3
Share

How Many Ferrari LaFerrari Were Limited?

Ferrari LaFerrari was limited to 209 units. Here is the related introduction of Ferrari LaFerrari: Power: This car is equipped with a 6.3-liter V12 naturally aspirated engine, with a maximum power of 588 kW, a maximum torque of 700 Nm, a maximum power speed of 9000 rpm, and a maximum torque speed of 6750 rpm. This is a high-speed engine. Appearance: The front of the Ferrari LaFerrari has a double-layer design, which is relatively sharp, with ventilation holes on the hood and a carbon fiber front lip at the bottom; the mirrors extend relatively far, and the support rods are very thin, with carbon fiber mirror covers. The car has a length, width, and height of 4702 mm, 1992 mm, and 1116 mm respectively. The chassis is a one-piece carbon fiber structure, using the same stamping technology as F1.
5
1
Share

What maintenance does a six-year-old car need?

A six-year-old car requires the following maintenance: 1. Replace the engine oil, oil filter, and clean the air filter; check whether the generator belt and wiper blades are damaged; 2. Check whether the levels of various fluids are normal; 3. Check whether the tire pressure is normal and whether the tires have uneven wear, bulges, or damage; 4. Inspect the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Check whether all switches and lights in the car are working properly. Car maintenance precautions include: 1. Make an appointment in advance; 2. Record any faults or questions encountered while driving and inform the staff during the maintenance registration.
7
3
Share

What does integrated high/low beam headlight mean?

Integrated high/low beam headlight combines both high beam and low beam functions in a single bulb, which contains two filaments for instant switching. The functions of integrated high/low beam headlights are: 1. Bi-xenon projector - By controlling the shutter to block portions of the high and low beams, it enables simultaneous illumination of both beams; 2. Wider and longer lighting coverage - The projector lens makes the light beam more uniform and concentrated with stronger penetration, enhancing driving safety. Different automotive lighting usage scenarios: 1. Position lamps (also called width markers) should be turned on during rain or dim light conditions; 2. Low beams are used on roads with street lighting; 3. High beams are used on roads without street lighting; 4. Turn signals must be activated in advance when the vehicle needs to make a turn.
11
1
Share

What car has a diamond-shaped logo with letters in the middle?

A diamond-shaped logo with letters in the middle belongs to Borgward. Its models include: Borgward BX5, Borgward BX7, Borgward BX6, Borgward BX3, Borgward BXi7, etc. Taking the 2020 Borgward BX5 as an example, its body structure is a 5-door, 5-seat SUV. The body dimensions are: length 4490mm, width 1877mm, height 1675mm, wheelbase 2685mm, minimum ground clearance 186mm, and fuel tank capacity 60L. The 2020 Borgward BX5 is equipped with a 1.4L turbocharged engine, with a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, and is paired with a 6-speed automatic transmission.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.