···
Log in / Register

Can the rear seats of the 2021 Buick Excelle be folded down?

4 Answers
EthanMarie
07/29/25 1:33am
The rear seats of the 2021 Buick Excelle can be folded down. First, move the front seats forward, then close the center armrest in the rear seats, retract all seatbelt buckles in the middle of the rear seats, adjust the headrest to the lowest position, and manually fold down the seats from the rear. The rear seats are operated by a shoulder switch, and they can be folded down in a certain ratio. There are mainly two types of rear seat folding methods: split-folding and full-folding. When fully folded, the rear seats cannot accommodate passengers, whereas with split-folding, the unfolded portion can still seat passengers. If the rear seats of the Excelle can be folded down, the seatbacks can be lowered to create more space when needed. The rear seat folding feature is very practical, and many compact models now have this function. However, the folding mechanisms vary by model. For example, in the Buick Excelle and Regal, the rear seats are folded using a lever in the trunk.
Was this review help?
8
5
Share
LaJulia
08/12/25 11:22am
I remember specifically testing the rear seats of the 2021 Buick Excelle when helping a friend pick up the car. In mid-to-high trim models, the backrest can be folded down as a whole unit, with the release switch hidden at the top center of the backrest—you need to pull hard on the fabric strap. When folded, the trunk can fit a child's balance bike or two 28-inch suitcases, though the backrest tilts slightly by about 10-15 degrees. It's fine for placing sleeping bags during camping, but using it as a bed directly might feel a bit uncomfortable on the lower back. Note that the base trim doesn't support folding, so check the spec sheet when buying. Also, it's a pity the seat cushions can't flip forward—it would've made moving large potted plants much easier.
Was this review help?
14
1
Share
Expand All
OJonathan
10/02/25 2:37am
Just helped my cousin check out this car last week! The 2021 Excelle's rear seats can indeed fold forward, but it's not the flexible 60/40 split design. To fold them down, you have to crawl into the trunk and pull hard on the center release cord - a bit awkward for girls. When fully flat, trunk space expands from 400L to nearly 1 cubic meter, easily accommodating IKEA tabletops. However, tests show its incline angle is steeper than Nissan Sylphy's, making large luggage wheels prone to getting stuck. One hidden advantage: the rear allows sneaky pet cage loading - my Golden Retriever was stuffed through this spot.
Was this review help?
4
3
Share
Expand All
NadiaDella
11/15/25 4:21am
From a professional perspective, the rear seatbacks of this vehicle can be fully folded down, but the seat cushions are fixed and cannot be flipped. When folded down, the trunk's longitudinal depth can extend to approximately 1.7 meters, requiring the front wheel to be removed for bicycle loading. Notably, its hinge design is located on the inner side of the trunk, causing the seat cushion to rise about 8 cm when folded, which limits the actual cargo height. Important reminder: The pull strap is hidden in the headrest seam and is easily overlooked. Dealerships often encounter customers who mistakenly believe the seats cannot be folded down.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

Must You Avoid Rolling Down Windows for Three Days After Tinting?

After applying car window tint, it is advisable to avoid rolling the windows up and down for several days, as the newly installed tint film requires 5-7 days to firmly adhere to the window. During this period, the film, which hasn't fully bonded, is prone to shifting. Additionally, the following precautions should be noted: 1. Avoid washing the car: It's important to refrain from washing the car within the first three days after tinting to prevent the film from peeling off due to moisture. 2. Defroster lines: Try not to use the rear window defroster for about a week. After tinting, you may notice a foggy appearance caused by water vapor—this is a normal part of the drying process. Excess moisture can also negatively affect the defroster lines. During this time, you can gently clean the tinted surface with a damp towel, sponge, or soft cloth. Moreover, the foggy appearance will gradually fade over time.
16
5
Share

What is the difference between a mechanical torque-sensing limited-slip differential and a Torsen differential?

Here are the differences between a mechanical torque-sensing limited-slip differential and a Torsen differential: 1. Nature: The Torsen differential functions as a differential when the differential torque inside is small, but automatically locks when the differential torque becomes too large, effectively improving the vehicle's off-road capability. Off-road vehicles with only electronic limited-slip are suitable for icy roads and light off-roading but not for extreme off-road conditions. 2. Principle: The Torsen differential operates based on the high internal friction torque (Mr) of the worm gear transmission pair for torque distribution. The internal friction torque (Mr) depends on the relative speed of the output shafts at both ends. When the speed difference between the two output shafts is small, the friction of the worm driven by the rear worm gear is also minimal. The differential spur gear absorbs the speed difference between the two output shafts. The mechanical limited-slip differential prevents tire slippage through mechanical principles, distributing driving force evenly to all four tires. Such off-road vehicles can handle high-intensity and prolonged off-road conditions, making them the most rugged off-road vehicles available.
19
5
Share

What brand is hfbos tire?

hfbos tire is a brand of Kumho Tire from South Korea. The history of Kumho Tire dates back to 1960. Currently, it has become one of the world's largest tire manufacturing enterprises. Kumho Tire has a complete production line, covering various categories such as passenger car tires, commercial vehicle tires, and high-tech tires. The following are the subsidiaries of Kumho Tire: 1. Kumho (China) Tire Sales Co., Ltd.: In May 2006, Kumho established a sales company in Shanghai, China, fully responsible for the sales of products from Kumho's four factories in China, implementing the separation of production and sales. 2. Kumho Tire Tianjin Factory: Adhering to the principle of 'Green Enterprise,' Kumho Tire Tianjin Factory strictly implements dust pollution prevention measures to ensure that all pollution emissions meet national environmental standards.
13
4
Share

Where is the fog light located on a car?

Car fog lights are located below the headlights, at the lowest part of the bumper closest to the ground. Fog lights are divided into front fog lights and rear fog lights. The fog light activation button is on the light control stalk. Locate the fog light symbol position and rotate the control ring to turn on the fog lights. The fog light switch has three positions: position 0 is off, the first position controls the front fog lights, and the second position controls the rear fog lights. When one position is engaged, the front fog lights work; when two positions are engaged, both front and rear fog lights operate together. The purpose of fog lights is to make the vehicle visible to others in conditions of reduced visibility such as fog or heavy rain, so fog light beams need to have strong penetration capability.
5
5
Share

What is the Impact of Unsprung Mass on Vehicle Performance?

Unsprung mass affects vehicle acceleration and handling. Below is an introduction to the relevant content: 1. Performance Enhancement: If a car is compared to a sprinter, then the unsprung mass is like running shoes—the lighter the shoes, the faster the sprinter runs. By replacing heavy components with lightweight aluminum alloy wheels and suspension parts (such as control arms and rocker arms), the unsprung mass can be effectively reduced, thereby improving the vehicle's acceleration and handling performance. 2. Other Effects of Unsprung Mass: When a vehicle is driven on the road, the suspension system continuously absorbs impacts from the road surface. The ideal comfort state for passengers is when the vehicle body remains relatively stationary to the road surface while the wheels move up and down with the road conditions. Achieving this purely through mechanical structures is nearly impossible, but by increasing the ratio of sprung mass to unsprung mass, the vehicle can come closer to this ideal driving state.
2
3
Share

What is the purpose of road width transition markings?

The purpose of setting road width transition markings is to alert drivers that there will be intersections, crosswalks, or other crossing facilities ahead, requiring them to slow down or stop to yield. Specific functions of road width transition markings: When vehicles pass through sections with longitudinal deceleration markings, drivers will visually perceive the lane gradually narrowing. This serves as a reminder for drivers to increase their attention, take deceleration measures in advance, and drive slowly. It helps prevent situations where drivers abruptly brake when approaching the stop line, avoiding potential accidents. These markings effectively prevent sudden braking by motor vehicle drivers before reaching the stop line. Pedestrians on crosswalks can clearly sense vehicles yielding, thereby feeling safer, reflecting a harmonious traffic environment between pedestrians and vehicles. Appearance of road width transition markings: Longitudinal deceleration markings consist of a series of diamond-shaped dashed lines parallel to the lane boundary lines. At the starting position of these markings, a 30-meter transition section is set, where the diamond-shaped dashed lines gradually widen from 10 cm to 30 cm. These markings are one of the new additions to the national standard for road traffic markings (GB5768.2-2009).
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.