Can the Rear Seats of Pajero Sport Lie Flat?

1 Answers
OSophia
07/30/25 1:54am
The rear seats of Pajero Sport can lie flat, but the length is quite limited. The rear seats of private cars can be used for luggage, and many sedans allow the second-row seats to be folded down. Rear Seat Folding Methods: There are mainly two types: split-folding and full-folding. When fully folded, the rear seats cannot accommodate passengers; when split-folded, the unfolded part can still seat passengers. Space Acquisition: The rear seats of Pajero Sport can be folded down. When more space is needed, the backrest of the rear seats can be folded down to obtain additional space. The gesture control system allows the driver to operate the central control system through specific hand gestures within a designated area. Pajero Sport is equipped with a gesture control system.
Was this review help?
5
3
Share
More Forum Discussions

What is the difference between an auto trade invoice and a 4S store invoice?

Since auto trade invoices are not issued by 4S stores, the vehicle cannot be reported as retail and can only be warranted locally. Other 4S stores may not recognize it. Auto trade cities often collaborate with 4S stores in other locations, so it's important to clarify where the vehicle will be picked up before purchase, as registration will affect the first warranty service. How to distinguish between auto trade invoices and 4S store invoices: 1. Check the watermark: Genuine invoices are printed on special anti-counterfeiting paper with black and white watermarks, which have a noticeable raised texture when touched. Fake watermarks have a weaker raised texture and appear blurry. 2. Prize area difference: The prize area covering on genuine invoices uses laser gold-stamped film with a matte finish, while most fake invoices have inferior covering technology in the prize area, making it harder to scratch off. 3. Color difference: Genuine invoices have a deeper color, appearing pinkish, while fake invoices are much lighter and look somewhat pale.
8
0
Share

Can a Dead Car Battery Be Restored?

If your car battery is dead, you can restore its normal charge by driving for one to two hours under normal conditions. Here are specific solutions: 1. Push-start with human power: The driver sits in the car and operates it while four others push the car from the front, back, left, and right. Once the car reaches a certain speed, the driver shifts into first gear. 2. Towing by another vehicle: Select a rope of appropriate length and securely tie the front and rear of both vehicles together with tight knots. The driver of the front vehicle should slowly tow the rear vehicle. Remember to drive slowly when using this method to prevent the rear vehicle from suddenly accelerating toward the front vehicle.
12
5
Share

Can You Shift Gears While the Car is Moving?

Generally, you can shift gears while the car is moving. Here are the relevant details: 1. Gear Shifting: Gear shifting (changing gears) refers to the transmission, which is used to change the torque and speed of the engine crankshaft to meet the different needs of driving wheel traction and speed under various driving conditions such as starting, accelerating, driving, and overcoming road obstacles. 2. Function: It allows the car to drive at a very low and stable speed, which is difficult to achieve with the minimum stable speed of an internal combustion engine alone; the reverse gear of the transmission enables the car to move backward; the neutral gear allows the engine to be separated from the drivetrain for extended periods during engine startup, parking, and coasting.
6
1
Share

At what temperature will a tire burst?

Tires can generally withstand a maximum temperature of 121.1°C. Daily inspections to prevent tire blowouts are as follows: 1. Regularly check if the tire has reached the wear indicator warning line: Normally used tires should be replaced immediately when worn to this mark. 2. Check the tire pressure at least every two months: Do not rely solely on visual inspection of the sinking amount. If insufficient pressure is found, identify the cause of the air leakage. 3. Frequently inspect the tires for damage: For example, check for punctures or cuts. Damaged tires should be repaired or replaced promptly. 4. If the two front tires have been repaired: They should be promptly adjusted to the rear wheels to ensure the front wheels are free from any hidden dangers. Remove stones from the tread grooves in time to prevent deformation of the tire crown. 5. Avoid contact of tires with oils and chemicals. 6. Regularly perform four-wheel alignment checks on the vehicle: If poor alignment is found, correct it promptly; otherwise, it may cause irregular tire wear and affect the tire's service life.
7
2
Share

What are the raw materials for automotive urea?

Automotive urea refers to a urea aqueous solution with a urea concentration of 32.5% and a solvent of ultra-pure water. The raw materials are specialized automotive urea materials and ultra-pure water. Automotive urea is an essential product for heavy-duty diesel vehicles to meet the National IV emission standards. Here is relevant information about automotive urea: 1. Introduction: Heavy-duty trucks, buses, and other diesel vehicles must adopt suitable SCR systems for exhaust treatment to meet the National IV emission standards. This system requires the use of a urea solution to treat nitrogen oxides in the exhaust. Therefore, automotive urea solution has become an essential product for heavy-duty trucks and buses to comply with the National IV emission standards. 2. Usage Instructions: Automotive urea must use Grade 1 ultra-pure water from the electronics industry. Since the SCR catalyst carrier is highly susceptible to metal ion poisoning, which would deactivate the catalyst, automotive urea solution must use Grade 1 ultra-pure water from the electronics industry. The automotive urea solution begins to freeze at -11°C and completely solidifies at -20°C in practical use. Current technologies involve adding modifiers to lower the freezing point of the solution and external heating devices to prevent solidification.
8
0
Share

How long does it take to get an A3 driver's license?

Under the condition of passing all tests at the first attempt, it takes about 3 months to obtain an A3 driver's license. According to statistics, the average time for all trainees to complete the certification process is approximately 6 months. The exact duration varies by region, depending on the efficiency of the local vehicle management office and the number of applicants. Details are as follows: 1. City bus driver's license: The A3 driver's license is specifically for city buses. It can be applied for when first obtaining a driver's license or through an additional licensing process. Driving a bus offers stable working hours and rest periods, along with a well-structured salary system, making it a popular choice for many to apply for an A3 license. 2. Test content: The A3 license test is similar to the standard C1 test, consisting of four sections: Theory Test (Section 1 and Section 4), Skill Test (Section 2), and Road Test (Section 3). In some regions, these sections may not follow a strict order; for example, Section 3 might be taken before Section 2, with Section 4 taken after the probationary period.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.