Can the Rear Seats of Jetta VS5 Be Folded Down to Serve as a Bed?

2 Answers
Mateo
07/29/25 5:44am
Jetta VS5's rear seats cannot be used as a bed when folded down. The rear seats support a 60:40 split-folding ratio, but they do not form a completely flat surface when folded. Using the folded rear seats as a bed may pose safety hazards. The Jetta VS5's engine delivers a maximum torque of 250 Nm and is paired with a 5-speed manual transmission. Its dimensions are 4419mm in length, 1841mm in width, and 1616mm in height, with a wheelbase of 2630mm. The fuel tank capacity is 51L, featuring a front MacPherson strut independent suspension and a rear multi-link independent suspension. The tire specification is 225/55R17.
Was this review help?
20
2
Share
McHenry
08/12/25 8:07pm
Last time I took the Jetta VS5 on a self-driving trip, I specifically tested this feature. When the rear seats are folded down, they form a flat surface of about 1.7 meters, but there is a slight slope in the middle. People under 1.75 meters tall can stretch their legs out, but there is a 3 cm height difference between the rear seat backs and the trunk connection. I laid down a layer of memory foam padding to sleep comfortably. The actual measured width of 1.2 meters is enough for a single person to turn over, but it's a bit tight for two people. Note that the sloping design at the rear reduces foot space by 8 cm, so you have to recline slightly when sleeping. Additionally, there is a reading light knob on the roof that can be used as a night light. On rainy days, opening the window slightly with the factory sunshade provides good ventilation.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

What is the purpose of a shark fin antenna?

The purpose of a shark fin antenna is: 1. Security and anti-theft - The built-in structure effectively prevents antenna theft with higher safety coefficient; 2. Convenience - No need to remove the antenna during automatic car washes or when entering space-constrained areas, saving time and effort; 3. Noise reduction - Combining aerodynamic principles with aesthetic design to effectively reduce airflow noise for quieter driving; 4. Multifunctional - Compatible with FM, GPS and GSM simultaneously; 5. Easy installation - International standard aperture size, OEM product requiring no roof dismantling; 6. Enhances vehicle communication signals; 7. Reduces static electricity on vehicle surface.
8
5
Share

What is the method to lift the rear seats of a car?

The method to lift the rear seats of a car is: 1. On both sides of the rear seat headrest, near the window, there will be a pull handle; 2. Pull the handle, and the backrest of the rear seat can be folded forward; 3. Simply push the seat cushion towards the rear of the car and lift it upwards. Car seats can be categorized into three types based on their usage: driver's seat, passenger seat, and child seat. The maintenance methods for car seats are: 1. Remove the protective plastic bag promptly; 2. Install a suitable seat cover or cushion; 3. Wipe the seats regularly; 4. Frequently dust the seats; 5. Avoid placing the seats near heat sources; 6. Avoid exposing the seats to direct sunlight.
18
4
Share

What is the throttle matching channel number for Volkswagen?

Volkswagen throttle matching channel number is 060. Note: Throttle adjustment matching is only suitable for Volkswagen vehicles equipped with electronic throttle engine systems, and the Santana GLi is not within the matching range. The following is an extended introduction: 1. Basic setting content: When the ignition switch is turned on, adaptive learning can be performed between the throttle control unit and the engine control unit. 2. Basic setting process: During the throttle basic setting, the throttle actuator moves from the maximum position to the minimum position in emergency operation. The engine control unit learns the stop position of the throttle control unit and the comparison curve between the throttle potentiometer and the throttle controller sensor through adaptive learning.
15
0
Share

What type of engine oil does the Roewe RX5 use?

The Roewe RX5 uses fully synthetic 5W30 engine oil. The functions of engine oil include: lubrication, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion protection, shock absorption, and anti-wear. Taking the 2020 Roewe RX5 as an example, it is a compact SUV with body dimensions of: length 4556mm, width 1855mm, height 1719mm, wheelbase 2700mm, and minimum ground clearance of 175mm. The 2020 Roewe RX5 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, maximum torque of 250Nm, and maximum power of 124kW. It is paired with a 6-speed manual transmission.
3
0
Share

What is the wheelbase of the Ghost?

The standard wheelbase version of the Ghost has a wheelbase of 3295 mm, while the extended wheelbase version measures 3465 mm. Below is some information about the Ghost: 1. The Ghost is equipped with a 6.6-liter twin-turbocharged V12 engine across all models, available in two versions: a low-power variant and a high-power variant. 2. Low-power variant: It delivers 571 horsepower and a maximum torque of 820 Nm. This engine reaches its peak power output at 5000 rpm and its maximum torque at 1600 rpm. 3. High-power variant: It produces 612 horsepower and a maximum torque of 840 Nm. This engine achieves its peak power output at 5250 rpm and its maximum torque at 1650 rpm.
19
2
Share

What causes the noise from the aluminum seat of the rear shock absorber in Volkswagen?

Here are the reasons for the noise from the shock absorber: 1. Damaged shock absorber: When the vehicle's shock absorber is damaged, the coordination between its components becomes problematic, causing a rattling noise when working on bumpy roads. 2. Damaged shock absorber top mount: The front shock absorber top mount of a car is made of rubber material, primarily serving to assist the shock absorber and spring in providing cushioning and shock absorption. When the top mount is damaged due to excessive wear, it not only produces noise during operation but also generates noise when turning the steering wheel while stationary, even if the shock absorber is not engaged.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.