Can the Rear Seats of a Porsche 911 Accommodate Passengers?

Which is the recirculation mode, A or M?

M stands for recirculation mode. Here are the relevant explanations: 1. A: Automatically determines whether recirculation or fresh air mode is needed based on external air quality, using sensors for automatic detection. It is generally suitable for hazy weather conditions. 2. M: This is the manual recirculation mode. It means the air blown by the blower circulates only inside the vehicle. Since no external air is involved, it has the advantages of fuel efficiency and rapid cooling (or heating), but the disadvantage is that it is not conducive to air renewal inside the vehicle. Fresh air mode means the blower draws air from outside the vehicle and blows it inside. The advantage is maintaining air freshness inside the vehicle, but it consumes more fuel and has slower cooling (or heating) speeds.

3

5

Share

Is it okay not to replace the spark plugs after 60,000 kilometers on the original car?

Under normal maintenance conditions, car spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. You can refer to the following standards for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, and remove the high-voltage wires. Mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the removed high-voltage wires according to the firing order, and then snap the cover back into place.

15

5

Share

What is T-BOX?

Telematics BOX, abbreviated as in-vehicle T-BOX, is part of a telematics system which consists of four components: the head unit, in-vehicle T-BOX, mobile APP, and backend system. The head unit is primarily used for audio-visual entertainment and vehicle information display; the in-vehicle T-BOX is mainly used for communication with the backend system/mobile APP to enable vehicle information display and control via the mobile APP. Below are some functions of the automotive T-BOX: 1. Remote Control: Users can control door locks, honk the horn/flash lights, activate air conditioning, start the engine, locate the vehicle, and more through the mobile APP. Utilizing these functions not only makes vehicle usage much more convenient but also saves users considerable time. 2. Remote Query: The mobile APP allows users to remotely check vehicle status, such as fuel level in the tank, whether windows and doors are securely closed, battery charge level and sufficiency, remaining driving range, etc. Comprehensive vehicle status information can be viewed on the phone without the need for personal inspection. If issues arise, users can also easily identify them through the mobile APP. 3. Security Service Function: This feature is designed primarily for driving safety and anti-theft purposes, including roadside assistance, emergency rescue help, automatic alarm for unusual vehicle movement, and remote automatic upload of abnormal vehicle information.

12

1

Share

What are the effects of overfilling engine oil in a car?

The effects of overfilling engine oil in a car are as follows: 1. Overfilling engine oil can lead to reduced power output and increased fuel consumption: The crankshaft in a car engine requires lubrication to function properly. However, if the oil is overfilled to the point where the crankshaft is submerged in oil, it creates excessive resistance during rotation, resulting in lower power output and higher fuel consumption. 2. Increased carbon deposits: If too much oil is added, it can easily mix with the fuel injection and enter the combustion chamber, where the oil burns. This reduces the combustion efficiency of the gasoline, leading to carbon buildup in the vehicle. Excessive carbon deposits can cause reduced engine power, increased fuel consumption, and other issues that negatively affect the car's performance. 3. Accelerated aging of internal components: When engine oil is overfilled, the pressure between various internal parts of the car increases significantly. Prolonged use under such high pressure can accelerate the aging of these components. In particular, excessive pressure and severe aging of the crankshaft oil seal can lead to oil leaks in the car.

7

4

Share

Should CRV use 5W30 or 0W20?

CRV should use 5W30 engine oil. Below is a detailed introduction to the types of oil grades: 1. High-temperature type: such as SAE20-SAE50, the number indicates the viscosity at 100*C, the higher the number, the higher the viscosity. 2. Low-temperature type: such as SAE0W-SAE25W, W means it is only used in winter, the smaller the number, the lower the viscosity and the better the low-temperature fluidity. 3. All-weather type: such as SAE15W/40, 10W/40, 5W/50, indicating that the viscosity grade at low temperature meets the requirements of SAE15W, 10W, 5W respectively, and the viscosity grade at high temperature meets the requirements of SAE40, 50 respectively, belonging to the winter-summer universal type.

9

3

Share

Is it normal for the Scirocco's ABS and ESP lights to illuminate simultaneously?

It is normal for the Scirocco's ABS and ESP lights to illuminate simultaneously. Here is the relevant information: The simultaneous illumination of the Scirocco's ABS and ESP lights occurs because the vehicle stability system and anti-lock braking system are in operation. Front-wheel or rear-wheel drive gasoline vehicles sometimes undergo emission testing, which is conducted using the steady-state test method on a chassis dynamometer. During the testing process, since the front wheels (drive wheels) are rotating while the rear wheels remain stationary, the excessive speed difference between the front and rear wheels causes the car's ABS or ESP system to interpret this behavior as a fault. As a result, the system stores a fault code and illuminates the warning light.

2

0

Share

Can the Rear Seats of a Porsche 911 Accommodate Passengers?

Which is the recirculation mode, A or M?

Is it okay not to replace the spark plugs after 60,000 kilometers on the original car?

What is T-BOX?

What are the effects of overfilling engine oil in a car?

Should CRV use 5W30 or 0W20?

Is it normal for the Scirocco's ABS and ESP lights to illuminate simultaneously?

Should You Use Internal or External Air Circulation When Running the Car AC?

What Does Keyless Entry System Mean?

What is the fuel consumption of the Honda Accord?

What are the ten hidden functions of the Geely Vision X6?