···
Log in / Register

Can the Rear Car Air Conditioner Be Removed and Discarded?

4 Answers
ZaneRose
07/29/25 7:02am
Yes. Here are some precautions for using car air conditioning: 1. Summer: Avoid prolonged low temperatures. While driving, car owners should not excessively pursue coolness by setting the air conditioner temperature too low. Otherwise, the significant temperature difference between the inside and outside of the car can easily cause endocrine imbalance, making people more prone to illness. Additionally, setting the air conditioner temperature too low will increase fuel consumption, raising vehicle operating costs. In fact, under normal circumstances, a temperature difference of about 6°C between the inside and outside of the car is ideal. 2. Winter: Cars do not have a heating function. The car air conditioner does not provide heating; the warm air comes from the engine's heat dissipation. Therefore, those who need warm air in winter do not have to worry about additional fuel consumption like the summer cooling function. Just pay attention to the timing of turning on the warm air.
Was this review help?
11
5
Share
LeZachary
08/12/25 11:27pm
With years of auto repair experience, I must warn that removing a car's rear AC requires caution. While it may seem like a way to reduce weight and save fuel, the entire AC system is interconnected—including pipes, compressor, and refrigerant. Removing it can cause refrigerant leaks, posing environmental concerns and reducing front AC efficiency due to imbalanced airflow. Some models risk dust clogging the system if pipes aren't properly sealed, accelerating damage. If removal is necessary, professional sealing is mandatory but costly. Worse, modern vehicle control systems may trigger error codes, causing cascading issues. My advice: unless the rear AC is irreparably broken with prohibitively high repair costs, keeping it with regular maintenance is wiser—saving money and ensuring safety.
Was this review help?
20
1
Share
Expand All
TaliaDella
10/04/25 5:13am
Last time I bought an old car, the rear air conditioning kept breaking down, and I even considered removing it to save trouble. The result was: after removing the rear AC, the air circulation inside the car became chaotic, and the back seats were as hot as a steamer in summer, especially when traveling with family—the kids were miserable. I tried fixing it myself but ended up making a mess, and the repair costs ended up being even higher. The rear AC is related to the cooling system, and tampering with it could also damage the fan or electrical circuits. Now I understand that removing it is worse than repairing it—simple checks like fuses or adding refrigerant can often solve the problem. When not in use, just turn it off; complete removal is unnecessary and affects comfort. Remember, modifying a car requires caution to avoid unexpected expenses and risks.
Was this review help?
18
2
Share
Expand All
VanKiara
11/17/25 6:49am
From a safety perspective, removing the rear air conditioning is not advisable. I've seen cases where the risk of passengers suffering from heatstroke significantly increases during hot weather, especially for children and the elderly. Vehicle design maintains an overall balance, and removal may disrupt the pressure system, leading to leaks or component damage. Not only are the repair costs high, but the safety risks are even greater. It's recommended to retain the system; the maintenance costs are not excessive, and ensuring the safety of all passengers is more important. Don't risk major losses for minor gains—seek professional advice first.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

What car brand does Changan's logo resemble when reversed?

When reversed, Changan's logo resembles the Acura brand, which is owned by the Japanese automaker Honda. Acura's vehicle lineup includes models such as the RDX, CDX, RL, MDX, and NSX. Taking the 2020 Acura RDX as an example, it is a midsize SUV with body dimensions of 4752mm in length, 1926mm in width, and 1668mm in height, with a wheelbase of 2750mm and a curb weight of 1724kg. The 2020 Acura RDX features a MacPherson strut front suspension and a multi-link rear suspension. It is powered by a 2.0L turbocharged engine producing 265 horsepower (195 kW) and 380 Nm of torque, paired with a 10-speed automatic transmission.
17
4
Share

What does Nissan's speed-sensitive volume mean?

The sound of the audio system will increase as the vehicle speed rises, because higher speeds generate more noise. Below is some information about car audio systems: 1. Function: Car audio is an important way for drivers to combat fatigue during travel, playing a crucial role in safe driving and vehicle safety. The earliest systems used car AM radios, later evolving to AM/FM radios, cassette players, and then to CD players and compatible DCC and DAT digital audio systems. 2. Causes of damage: One is the speaker itself being damaged and unable to function. The second is poor contact at the steering wheel's clock spring contacts. The third is contact erosion. The fourth is a blown fuse. The fifth is moisture ingress due to inadequate sealing.
18
0
Share

What is the problem with the difficult starting of Changan Honor engine?

The reasons for the difficult starting of Changan Honor engine are: 1. The mixture is too lean or too rich; 2. Fuel supply system failure or intake system failure; 3. Spark plug or ignition coil failure; 4. Severe carbon deposits in the engine; 5. Engine mount aging or loosening; 6. Insufficient cylinder pressure. The solutions for the difficult starting of Changan Honor engine are: 1. Adjust the mixture concentration; 2. Check the fuel supply system and intake system for faults; 3. Check whether the spark plug or ignition coil is working normally, and replace them in time if there is a problem; 4. Clean the carbon deposits in the engine; 5. Replace the engine mount; 6. Use high-quality fuel.
8
4
Share

What are the steps to replace wiper blades?

The steps to replace wiper blades are: 1. Lift the metal wiper arm away from the windshield and keep it stable in a position perpendicular to the windshield; 2. Press the tab to remove the old wiper blade; 3. Insert the new wiper blade and gently rotate it; 4. Hook the new blade into place to secure it, then return the wiper to the windshield. The maintenance methods for wiper blades are: 1. Always spray windshield washer fluid when using wiper blades, never operate them dry; 2. Do not use wiper blades to remove stubborn or hard contaminants, clean them manually instead; 3. When lifting wipers during car washing or routine cleaning, only hold the spine of the wiper.
20
4
Share

Where is the crankshaft sensor located on the Wuling Hongguang?

The crankshaft sensor on the Wuling Hongguang is located near the crankshaft pulley. The function of the crankshaft position sensor is to determine the position of the crankshaft, specifically its rotation angle. It typically works in conjunction with the camshaft position sensor to determine the basic ignition timing. Below is an introduction to the crankshaft sensor: 1. Magnetic Induction Type: The magnetic induction speed sensor and crankshaft position sensor are installed in the distributor in upper and lower layers. The sensor consists of a permanent magnet induction detection coil and a rotor (timing rotor and speed rotor), which rotates along with the distributor shaft. 2. Hall Effect Type: The Hall effect speed sensor and crankshaft position sensor utilize the Hall effect as a signal generator. The Hall signal generator is installed inside the distributor, coaxial with the distributor rotor, and consists of an encapsulated Hall chip and a permanent magnet fixed on the distributor plate. 3. Photoelectric Type: The photoelectric crankshaft position sensor is generally installed in the distributor and consists of a signal generator and a signal disc with light holes. The signal disc rotates with the distributor shaft. The outer ring of the signal disc has 360 light-slit gaps, generating a signal for every 1° of crankshaft rotation. Slightly inward, there are six evenly spaced light holes at 60° intervals, producing a signal for every 120° of crankshaft rotation. One of these light holes is wider, used to generate the signal relative to the top dead center of cylinder 1.
7
5
Share

How to adjust the ambient lighting in the new Sagitar?

The method to adjust the ambient lighting in the new Sagitar is: 1. Turn on the central control screen and press the CAR button in the lower left corner to enter the interface; 2. Click the settings option in the interface; 3. Find the ambient lighting option, select manual mode, and adjust the ambient lighting according to preference. Taking the Sagitar 2021 manual Fashion Smart Connect version as an example, its body dimensions are: length 4753 mm, width 1800 mm, height 1462 mm, wheelbase 2731 mm. The Sagitar 2021 manual Fashion Smart Connect version is equipped with a 1.2L turbocharged engine, with a maximum power of 85 kW, maximum power speed of 5000 rpm, maximum torque of 175 Nm, and maximum torque speed range of 1400 to 4500 rpm.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.