Can the paint on glasses be touched up?

1 Answers
LeSavannah
07/30/25 6:49am
Can the paint on glasses be touched up: 1. Going to an eyewear store to request a touch-up is definitely the safest method, with better results. The feel when wearing them afterward should not differ much from before, but it may not be free. 2. If the glasses are still under warranty, you can try to negotiate for a free touch-up. If the frames were expensive, you can also communicate about getting them repainted. 3. Another option is to purchase a touch-up pen. When searching, focus on keywords like anti-slip sleeves, eyeglass frames, and temple accessories. You can also ask customer service about the relevant model numbers to choose the desired style and place an order.
Was this review help?
14
5
Share
More Forum Discussions

What Are the Tire Models for Pickup Trucks?

Toyota Tundra pickup 255/70R18, 275/65R18 Foton Sup pickup 225/75R15 Foton Tunland pickup 245/70R16 FAW Kuncheng pickup 215/75R15 Zhongxing Flagship A9 pickup 205/80R14, 215/75R15 JMC Baodian 09 215/70R15 Great Wall Wingle 5 pickup official version 235/70R16, business version, wealth version 215/75R15. The first number 255 indicates the tire width is 255MM, 70 means the aspect ratio of the tire section is 70%, that is, the section height is 70% of the width, the letter R stands for radial tire, and 18 represents the rim diameter is 18 inches. In addition to the model, the tire also marks the following common data: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings are: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire. It is convenient for practical use, such as "Standard rim 5.00F".
4
5
Share

Can Automatic Transmission Cars Drift?

Automatic transmission cars can drift, and there are two methods to achieve it: gear drifting and handbrake drifting. Introduction to Drifting: Drifting is a driving technique, also known as "tail sliding." The driver causes the car to slide sideways by oversteering. It is usually compared to grip cornering. Drifting is mainly used in performances or racing events with significant changes in road conditions. Due to the friction characteristics of the road surface, drifting is frequently applied in off-road rally races, while other types of racing rarely use drifting techniques for cornering. This is because drifting on ordinary asphalt roads results in significant speed loss and increased tire wear. Unless for special reasons, drivers do not frequently use this technique during competitions. Methods of Drifting: Pull the handbrake while driving straight and then steer; pull the handbrake during a turn; slam the brakes while driving straight and then steer; slam the brakes during a turn; for rear-wheel-drive cars with sufficient power, slam the accelerator and steer when the speed is not very high.
11
3
Share

What Causes an Automatic Transmission Car to Stall at Idle When the AC is On?

Introduction to the reasons why an automatic transmission car stalls at idle when the AC is on: Clutch Pedal Issue: Beginners often struggle with clutch control, leading to situations where the clutch is released too quickly, causing the car to stall unexpectedly. Therefore, when starting a manual transmission car, it's important to control the clutch properly and keep the left foot steady. Although automatic transmission cars stall less frequently, releasing the clutch too quickly can still cause stalling. Braking Issue: Many beginners driving manual transmission cars forget to press the clutch simultaneously when braking, especially during sudden stops, which can cause the car to stall. Therefore, when braking, either shift to neutral or press the brake while holding down the clutch. Fuel Shortage Issue: Some cars have inaccurate fuel gauges, showing some fuel remaining when, in reality, the fuel supply can't keep up once the car starts moving, leading to stalling. It's crucial to refuel the car promptly to avoid stalling.
2
5
Share

Will an automatic car roll if parked in P gear without engaging the handbrake?

An automatic car will not roll if parked in P gear without engaging the handbrake. The relevant introduction to P gear usage is as follows: Principle of P gear: It mechanically locks the output shaft of the transmission to secure the car and prevent it from moving. Procedure for parking in P gear: After the car comes to a complete stop on a level surface, shift the gear from D to P, then engage the handbrake to complete the parking process, and finally turn off the engine. Safe parking method: If you only apply the brakes without shifting into P gear, the car may lose its braking capability. The safest and most reliable method is to shift into P gear after the car has come to a complete stop.
5
2
Share

When to Use D+ or - in Automatic Transmission Cars?

Below is the usage of D+/- in automatic transmission: Meaning of D+/-: The "D+" and "D-" in automatic transmission refer to the manual mode of the car. When the gear is in D, moving the gear lever to the left or right switches to manual mode. In manual mode, you can shift gears by operating "D+" and "D-". Pushing towards "D+" shifts up, while pushing towards "D-" shifts down. Usage of D+/-: When going downhill, you can use "D+" to shift to D2 or D3. Downhill driving utilizes the engine's braking effect, and 2nd or 3rd gear can meet the power demand. "D+" is also needed. When going uphill, the power demand is higher, so "D-" should be used to downshift the vehicle for climbing. Similarly, if the vehicle starts to accelerate downhill uncontrollably, use "D-" to downshift and control the speed. Additionally, "D-" can be used for short overtaking or in congested road conditions.
12
0
Share

Why Doesn't the Automatic Transmission Car Move When Stepping on the Gas?

Automatic transmission cars not moving when stepping on the gas can be due to the following reasons: Fuel system issues: After prolonged use, carbon deposits may form on the fuel injectors, leading to clogging. This can cause fuel line leaks, clogged fuel filters, and other fuel system problems. Intake system problems: The air filter among the three filters requires the most frequent cleaning or replacement. If the air filter becomes clogged or the throttle system is blocked, the air intake decreases, resulting in incomplete combustion and reduced power. Engine misfire: Power issues are closely related to the engine. If the car shakes at idle and experiences power loss, it may indicate an engine misfire. In this case, it is recommended to conduct a comprehensive inspection at a professional repair shop.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.