Can the owner be absent during the vehicle inspection?

2 Answers
RemingtonDella
07/29/25 1:02am
Can the owner be absent during the vehicle inspection? The following is the relevant introduction to vehicle annual inspection: 1. Inspection time: The owner of the motor vehicle can apply for the inspection qualification mark to the vehicle management office at the place of registration within three months before the expiration of the motor vehicle inspection validity period (vehicles after September 2012 are inspected every six years). The inspection time is within three months before the annual registration date of the driving license expires. 2. Materials: Before the annual inspection, check the validity date of the compulsory traffic insurance that includes the vehicle and vessel tax. If it has expired or will expire within three months after the inspection date, it is recommended to renew it in advance. ID card of the owner or agent; vehicle driving license.
Was this review help?
9
1
Share
MilesRose
08/12/25 5:12am
As a seasoned driver, I never have to go through the vehicle inspection process myself—I always rely on friends or professional agencies to handle it. You just need to prepare a copy of the vehicle owner's ID card, the vehicle registration certificate, and sign a power of attorney, so the agent can complete the procedures on your behalf. Nowadays, many places offer legitimate agency services. Spending a little money saves time and effort, making it especially suitable for working professionals or owners who live far away. However, it’s advisable to check the vehicle’s condition in advance, such as lights, brakes, and emissions, to avoid inspection failures that could delay the process. The agency procedure is straightforward, and with all the documents ready, you can enjoy a hassle-free experience.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

Where is the USB port for Lexus ES300 car USB drive?

Lexus ES USB ports are located inside the center console and in front of the gear shift lever. Here are the relevant details: Interface function: The USB port in cars mainly serves to utilize the vehicle's standard power supply, using USB as an interface to charge electrical devices or as a fixed power interface for electrical equipment. Precautions: Charging should only occur when the car engine is running to avoid damage to electrical devices caused by unstable vehicle power supply. Do not connect too many electrical devices to prevent excessive load that could damage the car battery and alternator. Do not use during thunderstorms to avoid lightning strike accidents. Avoid using USB ports in humid environments. If there is rust or water stains, it may cause the USB drive to fail to connect properly.
18
1
Share

How to reset the maintenance light on Zotye Damai X7?

The method to reset the maintenance light on Zotye Damai X7 is: After turning off the engine, press the button on the left side of the dashboard while powering on the car, and the maintenance light will reset after a few seconds. Taking the 2018 Zotye Damai X7 Glory Edition as an example, it belongs to a mid-size SUV with body dimensions of: length 4736mm, width 1942mm, height 1672mm, wheelbase of 2850mm, and a fuel tank capacity of 60 liters. The 2018 Zotye Damai X7 Glory Edition is equipped with a 1.8T turbocharged engine, with a maximum power of 130kW and a maximum power speed of 5800rpm, paired with a 6-speed dual-clutch transmission.
4
0
Share

What does the flashing yellow light in Jimny's low-range 4WD mode mean?

Jimny's flashing yellow light in low-range 4WD mode indicates a failure in switching the vehicle's four-wheel drive mode. Here is an introduction to Jimny: 1. Introduction: The Jimny is a light ORV off-road vehicle produced by Japan's Suzuki. 2. Body dimensions: The Jimny's body length, width, and height are 3645mm (including the rear door spare tire), 1645mm, and 1705mm (excluding the antenna), respectively. The front and rear wheelbases are 1395mm and 1405mm, with a minimum ground clearance of 210mm. 3. Powertrain: The power system uses a 1.3L naturally aspirated engine with a maximum power of 63kW and a maximum torque of 110Nm.
20
2
Share

What is a Class B Driver's License?

In driver's licenses, a Class B license refers to the authorization to drive large trucks. Class B licenses are divided into B1 and B2: a B1 license corresponds to medium-sized buses, while a B2 license corresponds to large trucks. Relevant information is as follows: 1. Driver's License: In driver's licenses, a Class A license refers to the authorization to drive large buses, a Class B license refers to the authorization to drive large trucks, and a Class C license refers to the authorization to drive small cars. 2. Vehicle Categories for Driver's Licenses: In 2004, the Ministry of Public Security, based on the driving difficulty and safety requirements of different vehicle types, subdivided the three categories of vehicles for which licenses are issued, namely Class A (large buses), Class B (large trucks), and Class C (small cars), to further strengthen targeted management.
5
5
Share

What are the differences between green and red antifreeze?

There is no difference between red and green antifreeze, and the relevant information is as follows: 1. Antifreeze: Antifreeze itself is a colorless and transparent liquid. The different colors are caused by adding dyes to the liquid. The reason for making it a bright color is to distinguish it from other liquids to prevent accidental ingestion, and also to distinguish and check the amount of antifreeze added. 2. Coolant: Antifreeze is a type of coolant containing special additives, mainly used in liquid-cooled engine cooling systems. It can prevent the coolant from freezing and expanding the radiator or freezing the engine cylinder block when the vehicle is parked in cold winter. Antifreeze has excellent properties such as preventing freezing in winter, preventing boiling in summer, preventing scale and corrosion all year round.
17
4
Share

What is the method for replacing the air conditioning filter in the Emgrand GS?

The method for replacing the air conditioning filter in the Emgrand GS is: 1. Pry open the clips on the inner side of the glove box and lay the glove box flat; 2. Unclip the cover plate of the air conditioning filter and remove it; 3. Take out the old air conditioning filter to complete the replacement. The Emgrand GS is a compact SUV with body dimensions of: length 4440mm, width 1833mm, height 1573mm, and a wheelbase of 2700mm. The Emgrand GS is equipped with a 1.4T turbocharged engine, with a maximum power of 104kW, a maximum power speed of 5200rpm, a maximum torque of 235Nm, and is paired with a 6-speed manual transmission.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.