Can the owner be absent during the annual vehicle inspection?

1 Answers
OGiselle
07/30/25 9:47am
For the annual vehicle inspection, the owner can authorize someone else to handle the procedures on their behalf. The proxy registration requires the agent's identity proof and an original written power of attorney from the vehicle owner with legal validity. The vehicle owner can apply for the inspection compliance mark at the local vehicle management office up to three months before the expiration of the current inspection period. Below are the consequences of not undergoing the inspection on time: Insurance non-payment: If an accident occurs when the insured vehicle has not been inspected as required or fails the inspection, or if the insured vehicle lacks other valid driving documents, the insurer will not bear the compensation liability. If a vehicle that has not undergone the annual inspection on time is lost, the insurance company can also refuse to compensate. Therefore, once the owner fails to complete the annual inspection, any subsequent traffic accidents will not be covered by insurance. Inspection deadlines: If the vehicle fails to obtain the inspection compliance mark within three consecutive inspection cycles after the expiration of the inspection period, it will be forcibly scrapped. For ordinary private cars, the first six years do not require on-site testing; only an inspection mark application is needed every two years. From the 7th to the 15th year, an annual inspection is required, and after 15 years, a semi-annual inspection is necessary. If the owner fails to undergo the inspection for three consecutive cycles, not only will the vehicle be scrapped, but the owner will also face fines and revocation of their driver's license.
Was this review help?
7
3
Share
More Forum Discussions

Where is the USB port located in the old model Besturn B50?

The USB port in the old model Besturn B50 is located inside the sunglasses compartment below the left side of the steering wheel. Functions of the car USB port: The USB port in a car can be used for playing music from a USB flash drive, charging mobile phones and MP3 players, serving as a USB car cigarette lighter port, functioning as an interface for radar detectors and dash cams, and charging laptops and tablets. It utilizes the car's standard power supply to charge 5V DC devices via the USB interface or serves as a fixed power supply port for electrical appliances. USB working principle: The in-car power supply converts 12V DC or 24V DC to 5V DC, then uses the standardized USB interface to transfer the 5V DC output to charge corresponding devices. Since different devices have varying power requirements, the power output of USB car chargers also varies significantly, primarily distinguished by the current capacity of the USB car charger.
18
2
Share

What are the functions of the center console in the old Audi Q7?

The functions of the center console in the old Audi Q7 include: an ignition off button and start button on the left, a 12V power socket next to the gear shift lever, individual control options for both passengers, a switch for the vehicle stability system, a cover plate for the card slot, navigation, information, Bluetooth phone, radio, and more. Below is a related introduction to the Audi Q7: Introduction to the Audi Q7: The Audi Q7 is a mid-to-large SUV that emphasizes comfort, skillfully integrating sportiness, functionality, high technology, and luxury quality. On the road, it stands out with its dynamic handling and sporty characteristics. The Audi Q7 also has strong driving power on off-road terrain. Audi Q7 Powertrain: The engine of the Audi Q7 delivers performance as outstanding as its exterior appearance. Audi's TFSI engine offers excellent power performance and fuel economy. The Audi Q7 is equipped with a 3.0TFSI engine, with a maximum power output of 245 kW. It can accelerate from 0 to 100 km/h in just 6.2 seconds, with a top speed of 250 km/h.
19
1
Share

What is the tire model of the old BYD F3?

BYD F3 tire model specification is 195/60R15. The meaning of 195/60R15 tire is: 195 refers to the tire width of 185 millimeters; 60 refers to the tire aspect ratio; R refers to radial tires, indicating a rim diameter of 15 inches. Methods to distinguish tires: The tire model can be identified based on the data on the side of the car tire. Generally, the side of the tire will indicate the tire width, aspect ratio, tire type, and applicable size. When purchasing tires, observe your tire data and then make a purchase. Meaning of tire model: There will be a series of numbers on the side of the tire, separated. Generally, the first three digits refer to the width of the car tire. Normally, the tire width ranges between 145 and 285. Additionally, different car displacements may also lead to the use of different tire specifications.
2
0
Share

Is the Kia K2 equipped with a timing belt or chain?

The Kia K2 engine's timing system uses a timing chain. Introduction to timing chains: The main function of an engine timing belt is to drive the engine's valve train, ensuring that the intake and exhaust valves open and close at the appropriate times to allow normal air intake and exhaust in the engine cylinders. Timing chain lubrication: Timing chains rely on engine oil for lubrication. If the engine oil is not changed for a long time or is of poor quality, it can increase friction between the timing chain and sprockets, reducing the chain's lifespan. However, even when a timing chain reaches the end of its service life, it won't break immediately but will gradually stretch. The consequence of stretching could potentially lead to valve interference.
7
0
Share

Is a fuel consumption of 10 L/100km normal for a Kia K2?

The Kia K2's fuel consumption is generally considered normal at around 8 L/100km. Overall, the fuel consumption is on the higher side but still acceptable. Poor fuel injector atomization: Faulty fuel pressure regulator, excessive fuel pressure, fuel injector leakage; Excessive engine carbon buildup: Part of the fuel injection is absorbed by carbon deposits, leading to wastage; Sensor malfunctions: For example, a faulty coolant temperature sensor can cause the engine to mistakenly think it's in a cold state, continuously sending fuel injection signals, resulting in excessive fuel consumption. A faulty oxygen sensor can lead to incorrect fuel correction, causing the ECU to constantly send fuel injection signals! A faulty mass airflow sensor can result in incorrect intake data.
12
0
Share

Where is the OBD interface located on the Qoros 3?

The storage compartment below the headlight switch, open it and look at the lower left position. The Qoros 3 is a model produced by Qoros Auto, which made its global debut at the Geneva Motor Show. In terms of body dimensions, the Qoros 3 measures 4615mm in length, 1839mm in width, and 1445mm in height, with a wheelbase of 2690mm. OBD interface locations for other models: The OBD interface in a car is generally located below the left side of the dashboard. The exact position varies by model; some are above the accelerator pedal, while others are in front of the gear lever. Function of the OBD interface: OBD, also known as On-Board Diagnostics, can monitor the working conditions of the engine's electronic control system and other functional modules of the vehicle during operation. By connecting the car's OBD interface to a computer, real-time vehicle data can be viewed and faults can be detected, providing convenience for car repairs, developing vehicle-related functions, and modifying car equipment.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.