Can the original owner be absent during out-of-province vehicle title transfer?

1 Answers
Erin
07/30/25 12:43am
For out-of-province vehicle title transfer, the original owner does not need to be present in person; a designated agent can handle the process. License plate registration requirements: If you purchase a vehicle from another region and wish to register it locally, having the purchase invoice and vehicle certification of conformity is sufficient for local registration. Precautions for out-of-province registration: When registering the license plate, you will need the compulsory traffic insurance policy. Any vehicle on the road must have compulsory traffic insurance. Without a license plate or temporary plate, the vehicle cannot be driven on the road. Prepare the necessary documents in advance: the original and a copy of the certification of conformity, the original purchase invoice, vehicle purchase tax payment, the owner's ID card, and the compulsory traffic insurance policy. The vehicle purchase tax must be paid at the local tax authority where the license plate is registered, and the tax payment location must match the registration location.
Was this review help?
17
2
Share
More Forum Discussions

How far can a BMW run-flat tire travel at 0 tire pressure?

In the event of a tire deflation, the vehicle can travel up to 250 kilometers at a speed of 80 km/h. Here are specific details about run-flat tires: 1. The reason run-flat tires do not collapse after losing air is due to their thickened rubber sidewalls. Even when air pressure is lost, the sidewalls can still support the vehicle's weight without causing severe deformation. Therefore, a flat tire does not significantly affect the vehicle's operation, and the driver may not even notice it. 2. In vehicles equipped with run-flat tires, minor air leaks may go unnoticed by the driver. Hence, the RSC (Run-flat System Component) includes a TPI (Tire Pressure Indicator) electronic warning system installed on the wheel rim. Once the tire pressure begins to drop, the RSC immediately alerts the driver.
8
4
Share

What to Do When a Motorcycle Won't Start After Being Idle for a Long Time?

Solutions for a motorcycle that won't start after being idle for a long time: 1. Check if the ignition system is working by examining whether there is a spark from the spark plug high-tension wire. A spark indicates normal operation, while no spark means the ignition system needs repair; 2. Inspect the carburetor for fuel presence. Close the fuel tank valve, loosen the drain screw at the bottom of the carburetor, and check if there is fuel inside. Generally, a lack of fuel prevents starting, so it is recommended to add an appropriate amount of fuel. Motorcycles, powered by gasoline engines and steered by handlebars to turn the front wheel, are two- or three-wheeled vehicles known for their lightweight, agility, and speed. They are widely used for patrol, passenger and cargo transport, and also serve as sports equipment. Broadly speaking, motorcycles can be categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes.
2
5
Share

How to Use the Headlight Delay Turn-off Feature?

The method to set up and use the headlight delay turn-off feature is as follows: After turning off the headlights and removing the key, immediately pull the light lever twice in the same manner as activating the high beams. This will enable the headlight delay turn-off function. The headlight delay turn-off feature allows the headlights to remain illuminated for an additional minute after the engine is turned off, providing external lighting for the driver after exiting the vehicle. This function is particularly useful in dark parking environments without streetlights. The headlight delay illumination feature has now become a standard in many car models, with the specific delay time preset by the system, which may vary slightly between different models. For some models, the operation method involves lifting the headlight control lever once in AUTO mode after turning off the engine to activate the headlight delay function, illuminating the surrounding area and enhancing safety for the driver after exiting the vehicle.
1
1
Share

How many liters of manual transmission fluid does the MG ZS require?

The MG ZS 1.6 manual transmission requires approximately 4-6 liters of fluid for a manual oil change (gravity drain method), while around 9-12 liters are needed when using an oil change machine. Different vehicle models have varying replacement intervals. Below are the recommended transmission fluid replacement cycles: Manual Transmission: Manual transmission fluid is generally recommended to be replaced every three years or approximately 100,000 kilometers. Automatic Transmission: Automatic transmission fluid is typically suggested for replacement every two years or around 40,000 kilometers. Continuously Variable Transmission (CVT): CVT fluid is usually advised to be changed every two years or approximately 60,000 kilometers. The transmission fluid replacement methods are as follows: Drain the fluid by loosening the drain plug at the bottom of the transmission, then refill. Remove the transmission oil pan directly for draining and refilling: This method provides more thorough replacement than the previous one by removing deposits from the bottom of the oil pan. Automatic transmission fluid replacement using a circulation machine: Dynamic oil change with an intelligent circulation machine can filter and clean sludge and impurities in the automatic transmission.
14
4
Share

How to Drive a Buick Business Automatic Transmission Car?

Correct starting steps for a Buick business automatic transmission car: 1. Insert the key and turn it to the ON position, then press the brake; 2. Shift to N gear, start the engine, then shift to D gear; 3. Release the handbrake, lift the foot brake, and start moving. This starting method avoids the brief reverse impact on the transmission when passing through R gear after starting the engine in P gear. The GL8 is a business car under the Buick brand, featuring the new-generation Buick wing-shaped chrome grille, with an elegant and grand appearance. The body dimensions are 5219mm in length, 1878mm in width, and 1776mm in height, with a wheelbase of 3088mm. In terms of power, the GL8 is equipped with a 2.5L SIDI all-aluminum intelligent direct injection engine featuring dual VVT and in-cylinder direct injection technology, delivering a maximum power of 147kW and a maximum torque of 253Nm, paired with a 6-speed DSS intelligent automatic transmission.
18
2
Share

What is the reason for the Geely Boyue's windows not automatically closing when locking the doors?

If the windows of the Boyue do not automatically close after locking the car, it is generally caused by a malfunction of the automatic window closer. Below is a detailed introduction to car windows: 1. Windows are an essential part of the entire vehicle body, designed to meet the needs of interior lighting, ventilation, and the visibility of the driver and passengers. Depending on the installation position of the glass, windows can be categorized into: front and rear windshields, side windows, and door windows. The design, structure, and quality of the windows significantly impact the driver's visibility, passenger comfort, aesthetic appearance, and aerodynamic characteristics. 2. The structure of car windows is typically curved and sealed, with rubber sealing strips connecting the window frame to the window glass. These sealing strips serve to seal and cushion, preventing damage to the windshield glass when the window frame deforms due to stress on the vehicle body.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.