···
Log in / Register

Can the Old Baojun Logo Be Replaced with the New One?

4 Answers
ArianaRose
08/31/2025, 01:46 AM

Baojun's old logo cannot be replaced with the new one. The reasons why Baojun's old logo cannot be replaced with the new one are as follows: 1. Firstly, Baojun's new logo is mainly used for more high-tech and intelligent high-end series models. 2. Secondly, replacing the logo without authorization is illegal. If caught by traffic police, you will be fined, your vehicle license will be confiscated, and you will be ordered to restore it to its original state. Additional information: Article 16 of the "Road Traffic Safety Law" states that no unit or individual may engage in the following acts: 1. Assembling a motor vehicle or altering the registered structure, construction, or characteristics of a motor vehicle without authorization. 2. Changing the model number, engine number, frame number, or vehicle identification code of a motor vehicle. 3. Counterfeiting, altering, or using counterfeit or altered motor vehicle registration certificates, license plates, driving licenses, inspection qualification marks, or insurance marks.

Was this review help?
13
5
Share
DiGia
09/12/2025, 10:13 PM

Yes, the old Baojun car can have its emblem replaced. From my experience of DIY car modifications, I can tell you: it's not difficult, but you need to be careful. The emblems on old Baojun cars are mostly glued or screwed on, and new emblems can be easily purchased online. However, when replacing it yourself, you should prepare tools like a scraper and cleaner to remove the old adhesive and avoid damaging the car paint. Beginners might easily mess it up, so I recommend going to a professional repair shop—spending a little money can save you trouble; they can also check for compatibility, ensuring the new emblem's mounting holes match the old car's shape. After replacement, remember to check if it's firmly attached to avoid it falling off in the rain. Additionally, this isn’t considered a major modification, but it's best not to affect the original car design to avoid issues with insurance or annual inspections. The total cost isn’t high—emblems range from a few yuan to a hundred yuan—but don’t expect it to increase your car’s value.

Was this review help?
4
4
Share
Expand All
StMaria
10/26/2025, 11:01 PM

Changing to a new car emblem is completely feasible. From a cost-saving perspective, here's my take: I often make minor modifications to my old car, and changing the emblem is low-cost—new emblems cost just a few dozen yuan. For example, Baojun's switch from a diamond to a horse head design looks more modern. Doing it yourself saves money and can be enjoyable—just clean the old emblem and apply new adhesive. However, don’t just go for the cheapest option; find a reliable seller to avoid poor-quality glue that might cause the emblem to fall off. Is it worth paying extra for labor? After weighing the pros and cons, I think: if it’s just for a fresh look, it’s fine to try, but an old car isn’t worth investing much more in. After changing the emblem, be careful when washing the car to avoid damaging it. In the long run, it’s better to save up for a new car or invest in engine maintenance.

Was this review help?
12
3
Share
Expand All
AlejandroRose
12/09/2025, 10:17 PM

Thinking of upgrading your car's appearance with a new emblem? I get it—fresh designs like Baojun's horse-head logo add dynamism. The process is simple: remove old adhesive, align the new emblem, and stick it on—done in under 30 minutes. But beware: this may reveal aged or faded paint, so check your car's finish first. Low-quality emblems peel easily; avoid rainy days for installation. I’ve tried swapping emblems—it’s fun, but don’t let it distract from safe driving.

Was this review help?
19
0
Share
Expand All
More Forum Discussions

What does e/t mean?

E: It means the engine uses an electronically controlled fuel injection system. T: Stands for Turbo, which means turbocharging. The principle and function of turbocharging are introduced as follows: The principle of turbocharging: A turbocharged engine is an engine that relies on a turbocharger to increase the intake air volume of the engine. A turbocharger (Turbo) is essentially an air compressor. It uses the exhaust gas from the engine as power to drive the turbine in the turbine chamber (located in the exhaust passage), which in turn drives the coaxial impeller (located in the intake passage). The impeller compresses the fresh air delivered through the air filter pipe and then sends it into the cylinder. When the engine speed increases, the exhaust gas discharge speed and turbine speed also increase synchronously, thereby increasing the degree of air compression. As a result, the engine's intake air volume increases accordingly, allowing for an increase in the engine's output power. The function of turbocharging: The main function of turbocharging is to increase the engine's intake air volume, thereby enhancing the engine's power and torque, making the car more powerful.
2
3
Share

What is the function of paddle shifters in a car?

The function of paddle shifters is to allow the driver to perform gear shifts without taking their hands off the steering wheel. How to use paddle shifters: Steering wheel paddle shifters enable the driver to shift gears without removing their left or right hand from the steering wheel, as required by traditional gear shift mechanisms. Simply hold the steering wheel at the three and nine o'clock positions and gently operate the paddle shifters, which enhances driving convenience and safety. Structure of paddle shifters: There are two types of paddle shifter structures: fixed and follow-up. Fixed paddle shifters do not rotate with the steering wheel, and this structure is relatively uncommon. Follow-up paddle shifters are connected to the steering wheel, maintaining their position at the three and nine o'clock positions even when the steering wheel is turned.
19
2
Share

Does the 14th-generation Sylphy have cruise control?

Nissan Sylphy 2.0L has cruise control, while the 1.6L version does not. Introduction to Cruise Control: Cruise control is used to maintain a constant speed for the vehicle. Once the car is set to cruise mode, the engine's fuel supply is controlled by the computer, which continuously adjusts the fuel injection based on road conditions and driving resistance to maintain the set speed without throttle operation. Cruise control has become a standard feature in mid-to-high-end sedans. Precautions for Using Cruise Control: The cruise control function should not be used when the vehicle cannot maintain a constant speed, in heavy traffic conditions, when the speed constantly changes, in windy areas, or on rough or mountainous roads.
15
3
Share

Can Dongming Petrochemical's gasoline be used?

Yes, it can be used. Here is a detailed introduction to Dongming Petrochemical's oil products: 1. History of Dongming Petrochemical: Its predecessor was Dongming County Petrochemical Factory established in 1987. In 1993, Li Xiangping was transferred from the county audit bureau and started as deputy director of the finance department at Dongming Petrochemical. Eight years later, he officially became the leader of Dongming Petrochemical. 2. Products and sales of Dongming Petrochemical: It mainly produces high-grade gasoline, diesel, liquefied petroleum gas, solvent oil, polypropylene, high-grade road asphalt, petroleum coke, various olefins, aromatics, various rubbers, hydrochloric acid, caustic soda, chlorine, methyl ethyl ketone, TDM, hydroxyethyl cellulose, ethylbenzene, styrene and other series of products, covering a wide market range including Shandong, Shanxi, Henan, Hebei, Sichuan, Hubei, Hunan, Anhui, Jiangsu, Zhejiang, Fujian, Yunnan, Guizhou, Guangdong and other regions.
4
4
Share

What is the minimum width requirement for warehouses with vehicle access?

For warehouses with vehicle access, the minimum width of the main passage should not be less than 2.5 meters. Mini Warehouses: Currently in China, there is a nascent form of mini warehouses that specialize in storing items. Some large warehouses offer small-scale storage services where items are stacked together without clear partitions, resulting in a lack of security and privacy. Most regions in China do not yet have the conditions to develop mini warehouses, and currently, only first-tier cities like Shanghai, Beijing, and Shenzhen are seeing a quiet rise in popularity for such services. Single-Story Warehouses: These are suitable for storing metal materials, construction materials, ores, machinery products, vehicles, oils, chemical raw materials, timber, and related products. Warehouses near water transport docks, railway transport hubs, and airports often use single-story buildings to expedite loading and unloading. The overall layout design of single-story warehouses requires interconnected roads to allow trucks and forklifts direct access. Multi-Story Warehouses: These are generally used to store general merchandise, electronic equipment, food, rubber products, pharmaceuticals, medical devices, chemical products, stationery, and precision instruments. The ground floor should have loading and unloading areas where vehicles can directly enter. Vertical transportation of goods typically relies on 1.5 to 5-ton freight elevators. Design considerations should allow for hand carts or forklifts to enter the elevator to speed up loading and unloading. Multi-story warehouses often use slides for unloading goods.
19
0
Share

Should Regular Cars Use 92 or 95 Octane Fuel?

The choice of fuel octane rating should be determined by the compression ratio of the car's engine. The appropriate fuel octane rating for the vehicle is usually indicated on the inside of the fuel tank cap. If it specifies 92 octane fuel, then use 92. If it specifies 95 octane fuel, then use 95. Whether it's 92 or 95 octane fuel, the number represents the fuel's anti-knock properties. A higher octane number indicates better anti-knock performance, but it has little to do with the quality of the gasoline itself. It is not necessarily true that a higher octane rating means better fuel, as many car owners commonly believe. For naturally aspirated engines, 92 octane fuel is generally recommended. Higher octane fuel has better anti-knock properties but burns relatively slower, which can lead to a higher compression ratio in the engine, resulting in reduced power and increased temperature. For turbocharged engines, manufacturers usually recommend using at least 92 octane fuel. Using 95 octane fuel can not only achieve higher torque at low speeds but also reduce engine vibration and lower noise levels.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.