Can the new Sagitar use 92-octane gasoline?

2 Answers
IvanDella
07/24/25 12:42pm
The new Sagitar can use 92-octane gasoline. Here is some relevant information about gasoline: 1. Generally, the octane rating indicated for a car is the minimum safe rating for combustion. For example, if it is recommended to use gasoline with an octane rating of 92 or higher, it means the minimum allowed is 92-octane. However, the minimum rating is not necessarily the most efficient for combustion. 92-octane gasoline has a much lower proportion of isooctane compared to 95-octane gasoline. The higher the octane rating, the higher the isooctane value. A higher proportion of isooctane means better anti-knock performance for the gasoline. 2. If a vehicle has been using 92-octane gasoline, it can be mixed with 95-octane gasoline, though the anti-knock performance will differ. In other words, lower-octane gasoline can be mixed with higher-octane gasoline, but vehicles that have been using 95-octane gasoline should not mix it with 92-octane gasoline. Higher-octane gasoline should not be mixed with lower-octane gasoline, except in emergencies where temporary mixing is acceptable. After mixing, a fuel additive can be used for cleaning.
Was this review help?
16
3
Share
SanElliott
08/11/25 6:48am
I've been driving my Sagitar for over three years, and the manual clearly states that it's recommended to use 95-octane fuel. However, once during a long trip when I couldn't find 95-octane, I filled half a tank with 92-octane as an emergency measure and didn't notice any abnormalities while driving. But if you use 92-octane fuel for a long time, the fuel's anti-knock performance is insufficient, which can easily cause knocking. The engine malfunction indicator light might come on, especially when climbing hills with the air conditioning on in summer—you might hear clunking sounds from the chassis. Turbocharged cars have high compression ratios, so it's best to follow the manufacturer's recommended fuel grade. After all, repairing a high-pressure fuel pump once could cost as much as three years' worth of 95-octane fuel.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

How to Handle License Plate Transfer?

The conditions for swapping license plates under the same owner are as follows: 1. If either of the two vehicles involved in the swap has any traffic accidents or violations, these issues must be resolved first, including handling the accidents or paying the fines; 2. The owner of the different license plates to be swapped must be the same person; 3. If a license plate swap between different vehicles has already been applied for within the year, another swap can only be done after a full year has passed; 4. Only non-commercial vehicles can swap license plates, and both vehicles must be of the same class and have the same type of license plate. Relevant information about license plates is as follows: 1. Introduction: License plates, commonly known as vehicle plates, refer to the plates attached to the front and rear of a vehicle, displaying the vehicle's registration number, registration region, or other relevant information. 2. Function: License plates serve as a numbering and information registration system for vehicles. Their primary purpose is to identify the vehicle's region of registration and to allow for the tracking of the vehicle's owner and registration details based on the plate number.
1
4
Share

Why Volkswagen Chips Are Out of Stock

Here are the reasons for the shortage of Volkswagen chips: 1. Impact of upstream industries: The strike by employees of upstream chip supplier ST Company has damaged the chip supply chain of SAIC and FAW. ST Company is a European automotive semiconductor chip supplier with an extremely high market share in the field of vehicle main control systems. The most important main control system chips for SAIC Volkswagen and FAW Volkswagen come from ST Company. The workers' strike in France in November led to insufficient production capacity at ST Company, which has had a significant impact on downstream automakers. 2. Fire at a supplier: A fire at Japan's Asahi Kasei Microdevices semiconductor company destroyed most of its core wafers. Most importantly, the company's crystal oscillators account for more than half of the market share in the automotive industry. This fire has resulted in a potential one-year or more delay in resuming chip supply, severely affecting the chips for automotive entertainment systems. 3. Insufficient self-sufficiency: The automotive industry's chip supply chain heavily relies on external suppliers, with a self-sufficiency rate of less than 10%, making it highly vulnerable to risks. Although China is the largest automobile producer, it relies heavily on imports for many core components, leading to poor risk resistance in the domestic automotive industry.
5
1
Share

What is the recommended speed control for a scooter during the break-in period?

During the break-in period, the speed should be maintained between 50-80 km/h. Here are some relevant introductions about the break-in period: 1. Concept: The break-in period generally refers to the process where mechanical components initially come into contact, rub against each other, and mesh together during operation. 2. Precautions: During a cold start, it is best to wait until the water temperature preheats to above 40°C before starting. When starting, gently press and slowly release the clutch and accelerator pedal, and choose a good road surface for driving. Avoid revving the engine when parking. For a vehicle in the break-in period, it is essential to control the driving speed properly—avoid excessively high speeds, keeping it ideally between 50~80 km/h.
17
5
Share

Why is the scooter lacking power?

Scooter lacking power is usually caused by the following reasons: 1. The motorcycle may have been exposed to high temperatures, meaning it has been driven in low gear for an extended period; 2. Cylinder head gasket leakage, resulting in insufficient cylinder pressure; 3. Poor quality gasoline; 4. The throttle lever has not returned to its position and remains closed. Solutions: 1. Regularly replace and clean the carburetor. 2. When replacing spark plugs, choose high-quality products. 3. Grind the valves and replace the piston rings. 4. Promptly inspect and replace worn clutch plates, chains, or sprockets. 5. Have a professional carefully adjust the valves.
5
1
Share

Which Lane is the Overtaking Lane in a Three-Lane Road?

The leftmost lane is the overtaking lane for small vehicles, while the middle lane serves as the driving lane for small vehicles and the overtaking lane for large vehicles. Here is an introduction to three-lane roads: 1. Three-lane roads: There are three lanes in the same direction. The leftmost lane is the overtaking lane for small vehicles, the middle lane is the driving lane for small vehicles and the overtaking lane for large vehicles, and the rightmost lane is the driving lane. The far-right lane is the emergency lane, which can only be used in case of vehicle malfunction; otherwise, fines and penalty points may be imposed. 2. Far-right lane: The far-right lane is the emergency lane, which can only be used in case of vehicle malfunction; otherwise, fines and penalty points may be imposed. For roads with two lanes in the same direction, the left lane is the overtaking lane, and the right lane is the driving lane. 3. Regulations: Article 78 of the 'Regulations for the Implementation of the Road Traffic Safety Law' stipulates: For roads with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and the minimum speed for the middle lane is 90 km/h. For roads with two lanes in the same direction, the minimum speed for the left lane is 100 km/h.
7
0
Share

What are the physical examination requirements for a C2 automatic transmission driver's license?

To apply for a C2 automatic transmission motor vehicle driver's license, the applicant must meet the following physical conditions: naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart, and there should be no motor dysfunction in the torso or neck. Below are the physical requirements for applying for a motor vehicle driver's license: 1. Height: Applicants for medium-sized buses must be at least 150 cm tall. 2. Vision: For other vehicle types, naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. 3. Color discrimination: No red-green color blindness. 4. Hearing: Must be able to distinguish the direction of sound sources with each ear 50 cm away from a tuning fork. Those with hearing impairments can apply for small cars or small automatic transmission vehicle licenses if they meet the above conditions with hearing aids. 5. Torso and neck: No motor dysfunction.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.