Can the new energy license plate be retained when changing cars?

2 Answers
GeorgeDella
07/23/25 9:00pm
No, it cannot be retained. According to legal regulations, the license plate of a new energy vehicle must be transferred together with the vehicle during the transfer process. Only after six months can the license plate and the vehicle be separated. Therefore, when the owner changes cars, they need to reapply for a vehicle license plate. The following is a related introduction about new energy: 1. Definition: Also known as non-conventional energy. It refers to various forms of energy other than traditional energy sources. These are energy sources that are just beginning to be developed or are being actively researched and promoted, such as solar energy, geothermal energy, wind energy, ocean energy, biomass energy, and nuclear fusion energy. 2. Characteristics: Abundant resources, generally with renewable characteristics, can be used by humans sustainably. Low energy density, requiring large spaces for development and utilization.
Was this review help?
1
2
Share
Mckenzie
08/10/25 6:54pm
As a car owner with years of driving experience, let me share some insights on this matter. New energy vehicle license plates can be retained when changing cars, but the new vehicle must also be a new energy type, such as a pure electric or plug-in hybrid. You need to have held the original license plate for at least one year, and then you can proceed with the formalities at the local vehicle management office. Just bring your ID card, the new car purchase invoice, as well as the old car's vehicle registration certificate and deregistration certificate. The whole process is quite simple, with low costs—just some basic handling fees. I think this policy is quite considerate, allowing you to keep your beloved license plate number without the hassle of going through the lottery again. I've personally experienced retaining a plate before, which saved me a lot of time and luck. Of course, regulations may vary slightly by region—for example, Shanghai has stricter requirements, while Beijing is more lenient. It's advisable to check online or call the vehicle management office before changing cars. Overall, this mechanism supports environmental protection, encouraging long-term use of green-plate vehicles and reducing carbon emissions—a win-win situation.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

How many kilometers can 7 liters of fuel run?

7 liters of fuel can run approximately 700 kilometers. The following is a related introduction to fuel consumption: Fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers refers to the amount of fuel consumed by a vehicle traveling 100 kilometers on the road at a certain speed. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle chassis, converted into speed parameters, and then calculated as the theoretical experimental fuel consumption data per 100 kilometers for the model when traveling at a specified speed. Road condition fuel consumption: Road condition fuel consumption is a fuel indicator calculated by repeatedly testing the fuel consumption of a vehicle traveling on a specified road at a specified speed and time, also known as multi-condition road cycle fuel consumption. In the specification, each cycle includes various driving conditions, and the driving conditions are recorded according to various indicators such as the specified shift time, parking time, driving speed, acceleration, braking, and deceleration in each cycle. The measured value obtained by this method is closer to the actual value.
14
5
Share

What is the difference between manual and automatic transmission cars?

The differences between manual and automatic transmission cars are: 1. Different gears: Manual transmission cars have gears 1, 2, 3, 4, 5, and R; automatic transmission cars have P, N, D, R, and hill-climbing gears. 2. Different operations: Manual transmission requires stepping on the clutch for manual gear shifting and reversing; automatic transmission does not require stepping on the clutch, only the brake and accelerator. The starting steps for an automatic transmission car are: 1. Press the start button, the ACC light comes on for vehicle self-check; 2. Turn the ignition key to the second position, the computer system starts self-check; 3. Step on the brake and press the start button to ignite and start; 4. Release the foot brake and let the car warm up for 1 to 3 minutes; 5. Step on the brake again, shift to D gear, and release the handbrake to start.
13
5
Share

Do automatic transmission cars experience clutch burning?

Automatic transmission cars generally do not experience clutch burning. Improper operation can burn the clutch plates: Improper operation by the driver (commonly referred to as half-clutching) causes continuous friction between the clutch plates, pressure plate, and flywheel, generating high temperatures that can burn the clutch plates; prolonged use of the clutch plates over time or excessive mileage leads to natural aging and wear; substandard materials in the clutch plates can cause premature damage; overloading the clutch results in abnormal wear of the clutch plates, pressure plate, flywheel, and other components, generating high temperatures that burn the clutch plates. Each gear in an automatic transmission has a clutch: Each gear in an automatic transmission has a clutch, which differs from the clutch in a manual transmission in that it is multi-plate, whereas a manual transmission clutch is single-plate. The clutch in an automatic transmission does not require replacement, and if replacement is needed, it indicates a more severe issue with the automatic transmission.
19
1
Share

Can Exhaust Cleaner Replace Gasoline?

Exhaust cleaner cannot replace gasoline. It must be mixed with gasoline for use and cannot be used alone without gasoline because it is not a fuel and cannot provide power for the car. Cleaner is an auxiliary product that helps gasoline burn more completely, thereby improving the car's power, reducing energy consumption, removing carbon deposits, and lowering exhaust emissions. Precautions regarding exhaust cleaner: Some unscrupulous merchants may exaggerate the effects of exhaust cleaner, claiming that it can replace fuel. Do not be deceived. Moreover, the quality of exhaust cleaners varies. Adding poor-quality exhaust cleaner may even damage the car's engine. If the car owner can use and maintain the car properly, the car's exhaust system will not have issues, and there is no need to purchase exhaust cleaner. If exhaust problems occur, promptly visit a 4S shop for inspection and repair. Do not add exhaust cleaner when the fuel tank is empty or the gasoline level is too low. First, add gasoline, then add the exhaust cleaner by pouring it directly into the fuel tank. Store away from fire sources and avoid direct sunlight. In case of fire, extinguish it with water. When initially cleaning carbon deposits, gradually increase the amount of cleaner added.
7
0
Share

Can I Only Use Parking Lights at Night?

You cannot drive at night with only parking lights on; you must turn on the low beam headlights. Headlights are mandatory for night driving: Traffic regulations stipulate that headlights must be used when driving at night. On roads without central barriers or center lines, high beams must not be used when meeting an oncoming vehicle within 150 meters. High beams must not be used when meeting non-motor vehicles on narrow bridges or roads without central barriers or center lines. When driving at night on roads with poor lighting, or in conditions of low visibility such as fog, rain, snow, or dust, high beams must not be used when following another vehicle closely at a short distance. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signals, drivers should alternate between high and low beams to signal. Remember to turn off high beams when meeting another vehicle at night: Generally, urban roads have good lighting conditions, and using low beams at night is sufficient, with high beams rarely needed. If the lighting is poor, drivers may use high beams. However, it is crucial to turn off high beams when meeting another vehicle.
9
4
Share

What car does Pi You drive?

Pi You's car is a McLaren 570s. Body size introduction: The McLaren 570s has a length, width, and height of 4530 millimeters, 1930 millimeters, and 1202 millimeters respectively, with a wheelbase of 2670 millimeters. The McLaren 570s is a mid-engine, rear-wheel-drive sports car under the McLaren brand, available in both convertible and hardtop models. McLaren 570s powertrain introduction: The McLaren 570s uses a 3.8-liter V8 twin-turbocharged engine. The 3.8-liter V8 twin-turbocharged engine has a maximum power output of 419 kilowatts and a maximum torque of 600 Newton-meters. The engine's maximum power speed is 7500 revolutions per minute, and the maximum torque speed ranges from 5000 to 6500 revolutions per minute. The engine is equipped with direct fuel injection technology and features an aluminum alloy cylinder head and cylinder block.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.