Can the Mercedes-Benz E300 have its transmission fluid changed?

What is the fuel tank capacity of the Qin PLUS DM-i?

The BYD Qin PLUS DM-i has a fuel tank capacity of 48 liters, as officially announced by the manufacturer. This information can also be found in the vehicle's configuration sheet. The Qin PLUS DM-i uses 92-octane fuel, with a fuel consumption of 3.8L per 100 kilometers, allowing a maximum range of 1263 kilometers on a full tank. The BYD Qin PLUS DM-i measures 4765*1837*1495 mm in length, width, and height respectively, with a wheelbase of 2718 mm. It is equipped with a 1.5-liter naturally aspirated engine that delivers a maximum power of 81 kW at 6000 rpm and a maximum torque of 135 Nm at 4500 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. The electric motor paired with this engine produces a maximum power of 132 kW and a maximum torque of 316 Nm. The front suspension is a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The MacPherson suspension is known for its simple structure, compact size, and low cost. The torsion beam rear suspension helps to maximize rear passenger space and trunk capacity. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel gauge accurately reflects the fuel level. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel unexpectedly. During actual refueling, the amount of fuel added may exceed the calibrated capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This extra space ensures that the fuel can expand safely when temperatures rise without overflowing. If fuel is filled up to the tank opening, the actual refueling volume may exceed the specified tank capacity.

15

5

Share

What are the symptoms of a damaged catalytic converter in a car?

A damaged catalytic converter can manifest the following symptoms in a car: 1. The exhaust emits a strange and unpleasant odor. 2. The car engine overheats and experiences premature excessive wear. 3. The car engine lacks power and produces abnormal noises. The catalytic converter is an external purification device installed in the car's exhaust system, which converts harmful carbon monoxide, hydrocarbons, and nitrogen oxides from the car's exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. The causes of catalytic converter damage include: 1. Blockage due to deposits from ethanol gasoline, sulfur-phosphorus chemical complexes, or lead-manganese metal deposits, as well as melting and blockage of the ceramic substrate caused by engine exhaust flames. 2. Loss of activity of the surface precious metals, rendering them unable to catalyze reactions. 3. Prolonged exposure to high temperatures, leading to thermal deactivation.

12

4

Share

What are the brands of Chaoyang tires?

Chaoyang tire brands mainly include Chaoyang, Goodride, Westlake, and Roadone. Chaoyang tire field: Chaoyang tire is a brand under Zhongce Rubber Group Co., Ltd. Zhongce owns well-known tire brands such as Chaoyang, Westlake, Goodride, Roadone, Yadu, and ARIS-UN. Chaoyang tire products currently cover passenger car tires, commercial car tires, engineering vehicle tires, industrial and agricultural vehicle tires, and two-wheeler tires. Chaoyang tire scope: Chaoyang tire products currently cover passenger car tires, commercial car tires, engineering vehicle tires, industrial and agricultural vehicle tires, and two-wheeler tires. Each series has various performance tires to meet the personalized needs of consumers. Chaoyang tire advantages: The biggest advantage is not wear resistance, but the balance of performance in terms of quietness, grip, and fuel efficiency. As a domestic brand, price is its biggest advantage, offering very high cost performance.

1

2

Share

What are the three filters in routine car maintenance?

In routine car maintenance, the three filters include engine oil, air filter, oil filter, and fuel filter. Car maintenance cycle: The maintenance cycle of a car is set when the vehicle leaves the factory, so the "wrench" symbol will appear every certain mileage to remind the driver to perform maintenance in time. Generally, the maintenance cycle for a car is every 5,000–8,000 kilometers, and the factory-set cycle is usually slightly longer than 8,000 kilometers. Routine maintenance items: Engine oil maintenance: Engine oil, also known as lubricating oil, can reduce engine wear and also has cooling and lubricating effects on the engine. There are three types of engine oil: Full synthetic oil: Needs replacement every 10,000–12,000 kilometers. If the car is not driven frequently, the oil may emulsify and lose its effectiveness, requiring replacement after about a year. Semi-synthetic oil: Needs replacement every 8,000–10,000 kilometers. Mineral oil: Needs replacement every 5,000 kilometers.

12

5

Share

What Causes Weak Acceleration in Automatic Transmission Vehicles?

Weak acceleration during vehicle startup may be caused by issues with the engine or transmission, which are fault-related problems that require timely troubleshooting. It could also be due to the vehicle having a small displacement while being heavily loaded. Many modern vehicles adopt a small-displacement turbocharged power configuration, and the turbo may not reach the necessary boost RPM during initial acceleration, resulting in a perceived lack of power—this is a normal phenomenon. Carbon buildup is a major culprit behind insufficient engine power and weak acceleration. Carbon deposits on the throttle body can restrict air intake; buildup on spark plugs can impair ignition; and deposits on fuel injectors can affect fuel spraying. Overheated carbon deposits may even cause pre-ignition, leading to weak acceleration. Therefore, it is advisable to first clean the engine's carbon deposits before investigating other potential causes of poor acceleration. Transmission clutch failure can also cause weak acceleration. The clutch is responsible for transmitting and disengaging engine power. Manual transmissions and dual-clutch transmissions use friction plate clutches, which wear out over time, leading to severe slippage and consequently weak acceleration. Additionally, dirty or insufficient transmission fluid can result in poor acceleration. For automatic transmissions, the fluid not only lubricates but also serves as the hydraulic medium for components like the clutch and gear-shifting mechanisms. Contaminated or low fluid levels will impair these systems' performance. During idle-start acceleration, the turbocharger's air pressure is weaker than the natural suction from cylinder movement, effectively making the engine operate like a small-displacement naturally aspirated unit—hence the normal sensation of weak power. When engine RPM exceeds 1,000, the turbo's boost pressure surpasses the cylinder's suction pressure, at which point the turbocharger truly activates. The RPM threshold where turbo pressure exceeds cylinder suction is called the turbo engagement speed. The moment the turbo engages, the car exhibits noticeable thrust, but this engagement RPM varies by manufacturer. Generally, smaller-displacement engines have lower engagement speeds to ensure power delivery and reduce turbo lag.

5

2

Share

What is the correct solution for P0300?

The correct solution for P0300 is as follows: 1. Use a diagnostic tool to read the fault code and confirm that it is a misfire fault causing the MIL light to illuminate. 2. Read the freeze frame information to confirm the operating conditions when the fault occurred. 3. Clear the fault code and operate the vehicle under the conditions determined by the freeze frame to analyze whether it is a genuine misfire or a misjudged misfire. 4. If it is confirmed to be a vehicle misfire, inspect the ignition system. 5. If there is no fault in the ignition system, analyze the air-fuel mixture control system. 6. When checking the wiring harness, ensure that the harness contacts are in good condition. 7. If the above steps still do not resolve the issue, consider whether there are faults in fuel injection, ignition timing, or mechanical load.

2

0

Share

Can the Mercedes-Benz E300 have its transmission fluid changed?

What is the fuel tank capacity of the Qin PLUS DM-i?

What are the symptoms of a damaged catalytic converter in a car?

What are the brands of Chaoyang tires?

What are the three filters in routine car maintenance?

What Causes Weak Acceleration in Automatic Transmission Vehicles?

What is the correct solution for P0300?

Why does the Aochi 1800 lack high and low speed options?

How to Deal with Trunk Water Leakage?

What is the size of a motorcycle fuse?

Why is the car loud when starting?