Can the Mercedes-Benz E300 be equipped with a car refrigerator?

1 Answers
DelDominic
07/29/25 5:24pm
The Mercedes-Benz E300 can be equipped with a car refrigerator. Below is the relevant introduction of the Mercedes-Benz E300L: 1. Exterior: The Mercedes-Benz new E-Class long-wheelbase version has no changes compared to the imported E-Class, except for some adjustments made to the body length, width, and wheelbase to cater to the Chinese market. The domestic Mercedes-Benz E-Class long-wheelbase version has a body length of 5012mm, with the wheelbase extended by 140mm to 3014mm, and the body width slightly increased by 1mm. 2. Interior: The dark gray interior appears relatively youthful, paired with brown seats, giving a high-end feel. The focal point on the upper part of the center console is the large-size GPS navigation screen, which is impressive enough. The middle section consists of audio control buttons, while the lower part houses the air conditioning control buttons.
Was this review help?
17
2
Share
More Forum Discussions

Where is the Cruze fog light switch located?

The Cruze fog light switch is located on the left side of the steering wheel, integrated with the headlight switch. The middle round button is the fog light switch, with the upper semicircle controlling the front fog lights and the lower semicircle controlling the rear fog lights. The front fog light symbol features three diagonal lines intersected by a curved line on the left side and a semi-elliptical shape on the right. The rear fog light symbol shows a semi-elliptical shape on the left and three diagonal lines intersected by a curved line on the right. Below is a detailed explanation about the Cruze fog lights: 1. For all vehicles, the prerequisite for activating fog lights is turning on the headlights first, then pressing the fog light button. Some vehicles use dedicated buttons for front and rear fog lights, typically located near the instrument panel. After turning on the headlights, pressing the front fog light button illuminates the front fog lights, while pressing the rear fog light button activates the rear fog lights. Alternatively, some models use a rotary switch to operate the fog lights. 2. Certain vehicles have fog light controls installed on the light control lever, operated by rotation. Turning the middle button marked with the fog light symbol to the ON position activates the front fog lights. Further rotating the button downward to the rear fog light position simultaneously activates both front and rear fog lights.
8
2
Share

What Causes Car Shaking While Driving?

Driving a car with shaking issues can be attributed to the following reasons: 1. Aging engine components: Car shaking is often related to the aging of engine mounts (also known as engine cushions). Engine mounts act as the shock absorption system for the engine, responsible for absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations can transfer to the steering wheel and the cabin, causing shaking during idle. 2. Ignition system problems: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or improper spark plug firing can also lead to such issues.
11
2
Share

What are the precautions when picking up a Mercedes-Benz?

When picking up the car, it is essential to thoroughly inspect the vehicle and ensure all accompanying items are complete. More details about picking up the car are as follows: 1. The accompanying items of the car include the instruction manual, user manual, maintenance manual, spare tire, jack, tire-changing tools, and first aid kit. 2. Some high-end Mercedes-Benz models are equipped with run-flat tires, so these Mercedes-Benz vehicles do not have a spare tire, nor do they include tire-changing tools or a jack. 3. When picking up the car, a thorough inspection is necessary. During the inspection, first check the exterior paint for any flaws, then examine the main screws in the engine compartment for signs of tampering or rust. Inspect the interior for any defects, and finally start the engine for a test drive. If everything is in order, you can proceed to the vehicle management office for registration. 4. Many parts in the engine compartment have production dates, such as the headlights, radiator, and radiator frame. Many other components on the car also have production dates, such as the glass and tires. The production dates of all parts on the car should be earlier than the vehicle's production date; otherwise, they have been replaced later. The vehicle's production date is indicated on the nameplate on the B-pillar and also on the nameplate in the engine compartment. During the inspection, you can check the production dates of various components on the car and compare them with the vehicle's production date to determine if any parts have been replaced later.
2
1
Share

What are the steps for remote one-button start on the new LaCrosse?

The steps for remote one-button start on the new LaCrosse: First, directly press the lock button on the remote key fob, then immediately press and hold the remote engine start button to start the vehicle. The LaCrosse's remote start function uses the remote key fob to remotely start the engine and activate the car. Remote car starting is quite common, with most mid-range and high-end vehicles equipped with this feature. Below are the characteristics of remote car starting: 1. High reliability: Since remote car starting is structurally identical to manual ignition in the vehicle's setup—both initiate the engine via an electric motor—there is no mechanical wear on the heater, thereby reducing failure rates. 2. Convenience: Although remote car starting cannot be scheduled like parking heaters, the remote start method is still very convenient. The remote range is typically no less than 50 meters, allowing the engine to be started in advance from home or work if the car is parked in a ground-level parking lot. 3. Automatic timing: Usually, if no operation is performed after a certain period following a remote start, the engine will automatically shut off to prevent potential fuel waste from forgetting to turn it off.
11
4
Share

What are the steps for disassembling and assembling the blower of Peugeot 408?

Peugeot 408 blower disassembly method: 1. First, remove the glove box on the passenger side of the Peugeot 408 by pulling it and turning it counterclockwise. 2. Next, after removing the screws, take out the air duct. 3. Disconnect the wiring harness plug connected to the Peugeot 408's air conditioning system. 4. Unplug the 4102 connector on the Peugeot 408's air conditioning blower and remove the blower inside. Advantages of Dongfeng Peugeot: 1. Globally certified full protection: Excellent passive safety performance can minimize injuries caused by accidents. The Peugeot 408 features a pre-tensioned safety protection system, with the body structure designed and manufactured according to stringent European safety standards. The vehicle has over 5,300 laser welding points, with key components reinforced using ultra-high-strength and high-strength steel plates up to 1,300 MPa, and the maximum thickness of the vehicle's steel plates reaches 4mm. 2. Optimized structure: The Peugeot 408's structure is meticulously designed with a co-load-bearing "cage" body structure and HLE high-strength body. Through a segmented kinetic energy transfer system, it disperses impact energy according to a predetermined program during collisions, maximizing protection for the cockpit and its occupants, and facilitating repairs. Economically, it directly and significantly reduces vehicle maintenance and insurance costs.
8
1
Share

How often is the vehicle and vessel tax paid?

According to the new regulations, the payment of vehicle and vessel tax is collected by insurance institutions, once a year, and must be paid in full at one time. The scope of vehicle and vessel tax collection includes the following aspects: Motor vehicles and vessels that should be registered with the vehicle and vessel management department in accordance with the law; Motor vehicles and vessels that do not need to be registered with the vehicle and vessel management department in accordance with the law but operate or work within the premises of a unit. Vessels include motorized vessels and non-motorized vessels. Motorized vessels refer to those that rely on fuel or other energy sources as power, such as passenger ships, cargo ships, hovercrafts, etc.; non-motorized vessels refer to those that rely on human or other forces, such as wooden boats, sailboats, etc. The following aspects should be noted when paying vehicle and vessel tax: If the basic information of the vehicle is changed, the vehicle operation tax needs to be verified or adjusted, or if applying for tax reduction or exemption for the vehicle; Taxpayers who fail to pay the vehicle and vessel operation tax on time must first go to the local tax authority in charge of the county (district) where the vehicle is registered to complete relevant procedures before making the payment.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.