Can the manual rearview mirrors of the Jetour X70 Plus be closed?

What is the Principle of Ultrasonic Sensors?

Ultrasonic sensors primarily consist of two types of materials: piezoelectric crystals and nickel-iron-aluminum alloys. Piezoelectric crystal-based ultrasonic sensors are reversible transducers that can convert electrical energy into mechanical oscillations to generate ultrasonic waves. Conversely, when they receive ultrasonic waves, they can also convert them back into electrical energy. Below are some key aspects of ultrasonic waves: 1. Ultrasonic waves are mechanical vibrations with frequencies higher than 20 kHz. They are characterized by high frequency, short wavelength, minimal diffraction, and particularly strong directionality, allowing them to propagate directionally like rays. 2. Ultrasonic waves have strong penetration capabilities in liquids and solids, especially in opaque solids. When encountering impurities or interfaces, they produce significant reflections, forming echo signals. Additionally, they generate the Doppler effect when interacting with moving objects. 3. Ultrasonic sensors utilize sound wave media to perform non-contact, wear-free detection of objects. They can detect transparent or colored objects, metals or non-metals, as well as solids, liquids, and powdered materials. Their detection performance is virtually unaffected by any environmental conditions, including smoke, dust, or rainy weather.

1

Share

What is the chassis code of the BMW 7 Series?

The chassis code of the BMW 7 Series is G70. The chassis refers to the four major components of a vehicle: the transmission system, running gear, steering system, and braking system. Its function is to support and install the car engine and its various components and assemblies, forming the overall shape of the car, receiving the engine's power to enable the car to move and ensure normal driving. The BMW 7 Series is a large luxury car equipped with four engines: a 2.0-liter turbocharged engine, a 3.0-liter turbocharged engine, a 4.4-liter twin-turbocharged engine, and a 6.6-liter twin-turbocharged engine. Among them, the 2.0-liter turbocharged engine has a maximum power of 195 kW, a maximum torque of 400 Nm, a maximum power speed of 5000 to 6500 rpm, and a maximum torque speed of 1550 to 4500 rpm. This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block.

9

0

Share

What Causes the P Gear to Get Stuck?

Automatic transmission P gear getting stuck usually occurs when the P gear is hastily engaged before the vehicle comes to a complete stop, leading to difficulty in moving the gear lever. Below are the relevant details: 1. Function of the P gear: The P gear is designed to lock the rotating parts of the car mechanically, preventing the vehicle from moving. When the car needs to stay in a fixed position for an extended period or before leaving the vehicle after parking, the hand brake should be engaged, and the gear lever should be pushed into the P position. This mechanically locks the wheels to prevent rolling. 2. Avoiding damage: The P gear should only be used when the vehicle is completely stopped; otherwise, the mechanical parts of the automatic transmission may be damaged. Additionally, automatic transmission vehicles are equipped with a neutral start switch, ensuring the engine can only be started in the P or N gear to prevent sudden forward movement if accidentally started in other gears.

19

3

Share

How to Remove the Cabin Air Filter of Baojun 560?

Baojun 560 cabin air filter removal steps: First, remove all heavy objects from the storage compartment. Then, apply force to pull the storage compartment downward from the top on both sides. After that, you will see rubber pads on the left and right sides. Finally, use force to pull the lower connecting parts upward on both sides to detach it. Below are some relevant details about the Baojun 560: 1. The front design of the Baojun 560 continues the Baojun family style. The LED daytime running lights are located below the fog lights, and the headlights are equipped with LED position lights. It features a 10-inch large touchscreen entertainment system, and the control area adopts two knobs. 2. In terms of power, the Baojun 560 is equipped with a 1.8L naturally aspirated engine producing 101kW and 186Nm, paired with a 5-speed manual transmission and an AMT transmission.

16

3

Share

Does Revving the Engine in Neutral Gear Harm the Car?

Revving the engine in neutral gear can cause the following damages to the car: 1. Revving in neutral subjects the engine's moving parts to significant inertial forces, affecting the engine's reliability and lifespan. 2. When the car is in neutral, the engine does not output power. Rapidly increasing the engine speed by revving causes sudden acceleration of moving parts such as pistons and connecting rods, generating substantial acceleration and subjecting them to significant alternating loads. Additionally, the sharp rise in engine speed during revving can lead to inadequate lubrication in friction areas, increasing the risk of cylinder scuffing and bearing failure. 3. Prolonged revving in neutral can result in severe incomplete combustion. If the unburned fuel-air mixture ignites outside the cylinder, it may cause the vehicle to catch fire. Incomplete combustion also promotes carbon buildup, which can clog the catalytic converter, leading to abnormal high temperatures. These high temperatures may cause wiring to catch fire, with potentially serious consequences.

10

0

Share

How to Remove the Rear Seats of Zotye T700

On both sides of the rear seat headrests, near the windows, there are handles. Pulling these handles allows the backrest of the rear seats to fold forward. For the cushion part of the rear seats, simply push the cushion toward the rear of the car and then lift it upward to remove it. More details are as follows: 1. The front seats of the car are also very easy to remove. There are sliding rails under the front seats, which are used to adjust the seat position. These rails are usually fixed to the floor with screws. Just unscrew the screws to remove the front seats. 2. The Zotye T700 rear seats feature independent seats, which can be adjusted forward and backward, and the backrest angle can also be adjusted. When the backrest is folded forward, the cushion moves downward in coordination to ensure a smooth and aesthetically pleasing appearance with the luggage compartment cover after the backrest is folded. Compared to fixed seats, independent seats significantly enhance the comfort of rear passengers. Users can adjust the position according to their preferences, providing a more comfortable driving and riding experience.

3

5

Share

Can the manual rearview mirrors of the Jetour X70 Plus be closed?

What is the Principle of Ultrasonic Sensors?

What is the chassis code of the BMW 7 Series?

What Causes the P Gear to Get Stuck?

How to Remove the Cabin Air Filter of Baojun 560?

Does Revving the Engine in Neutral Gear Harm the Car?

How to Remove the Rear Seats of Zotye T700

How to Adjust Valve Clearance in a Car?

How to Replace the Key Battery for C200L?

What is the relationship between Bentley and Rolls-Royce?

What are the dimensions of the BMW 740Li?