Can the maintenance light of the 2020 Volkswagen Lavida be reset?
2 Answers
2020 Volkswagen Lavida maintenance light can be reset. However, a certain method needs to be mastered. Reset method: Switch to the maintenance page using the right steering wheel shortcut button, and press and hold for 10 seconds to reset the maintenance light of the Volkswagen Lavida. The original intention of setting the car maintenance light is to remind the owner to perform car maintenance as soon as possible when necessary. Car maintenance status: The "SERVICE" sign on the dashboard display is the maintenance cycle indicator. When the ignition switch is in the ON position, the "SERVICE" sign on the display flashes, and the sign disappears after starting the engine, indicating that the car should be serviced.
The 2020 Volkswagen Lavida's maintenance light can be reset. I've personally repaired over a dozen Lavidas, and the method is quite straightforward. First, turn off the engine and make sure the key is in the OFF position. Then, locate a round button on the left side of the steering wheel or around the instrument panel, which usually controls the menu display. Press and hold this button without releasing it. Next, turn the key to the ON position, but do not start the engine—this will activate the instrument display. At this point, the maintenance light will either flash or show a specific symbol. Keep holding the button for a few seconds until the light completely turns off or you hear a beep. The reset is then complete. If it fails, it might be because the car wasn't fully parked or the battery is low on charge. This operation prevents the light from staying annoyingly on and ensures more accurate vehicle maintenance records. It's recommended to perform this after every maintenance service. The detailed steps can be found in the manual and are easy to locate. After resetting, remember to test-drive the car to ensure other functions are working properly. Don't be afraid to try—if it doesn’t work, you can always visit a repair shop to reset it using a diagnostic tool, which won’t affect the car's safety. In most cases, doing it yourself saves time and money—it's a handy maintenance tip.
