Can the maintenance light of Chery EX be reset?

What does the engine MIL fault mean?

MIL stands for Malfunction Indicator Lamp, indicating that there is a fault in the engine system. Here is the relevant information: 1. Fault light on: When the general OBD fault indicator light comes on, the ECU will use some pre-set data to temporarily replace the faulty data. As a result, the car will operate based on "false data," which may affect many normal operations. 2. Precautions: Regardless of the cause of the engine fault light, it is necessary to use a computer diagnostic tool for diagnosis. If it is a false fault code, simply clear it. If there is a real fault, troubleshooting and repair should be carried out based on the fault code.

13

2

Share

What is the maintenance schedule and content for the Toyota Corolla?

Toyota Corolla's maintenance schedule involves minor maintenance every 5,000 kilometers and a major maintenance at 40,000 kilometers. The maintenance primarily covers the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. Below is an introduction to car maintenance: 1. Definition of car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Purpose of car maintenance: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate potential hazards to prevent failures, slow down the deterioration process, and extend the usage cycle.

2

Share

What are the symptoms of a loose motorcycle timing chain?

Motorcycle timing chain looseness can lead to reduced engine efficiency in mild cases, and in severe cases, it can cause the engine to malfunction or even become damaged. Below is some information about the motorcycle timing chain: 1. Introduction: The motorcycle timing chain, also known as the timing chain, is responsible for providing the engine with accurate ignition timing and coordinating the opening and closing of the valves to ensure the engine operates normally and efficiently. 2. Hazards of being too loose or too tight: The speed of the vehicle is determined by the engine's RPM and the transmission gear. The chain is the connecting component between the transmission output gear and the drive wheel gear. If it is too loose, it cannot guarantee the transmission ratio and power transfer; if it is too tight, it is prone to wear and breakage.

20

1

Share

Why can't the van start after wading through water?

The reasons why a van cannot start after wading through water are as follows: 1. Spark plug failure: The spark plug is the key component of the car's ignition system, so its performance directly affects the overall working performance and efficiency of the vehicle. 2. Battery depletion: The characteristic symptom is that the starter begins to turn but the speed is insufficient, and later the starter only makes abnormal noises without turning. 3. Gasoline flow obstruction: The characteristic symptom is that there is no oil pressure in the engine fuel supply pipe. This situation often occurs on particularly cold mornings and is caused by long-term dirt in the fuel pipeline. The car can be placed in a warm environment, and it can start after a while.

4

5

Share

What Does Engine Control System Malfunction Mean?

Engine control system malfunction indicates ECU damage. The causes of this malfunction include: 1. Power circuit: power circuit failure; 2. Power module: output power module failure; 3. Memory: memory failure; 4. ECU: ECU water ingress and moisture damage. Below is an introduction to related content: ECU: ECU stands for Electronic Control Unit, which consists of a microprocessor, memory, input/output interfaces, analog-to-digital converters, as well as shaping, driving, and other large-scale integrated circuits. The car engine is the device that provides power to the car, serving as the heart of the vehicle, determining its power, fuel efficiency, stability, and environmental friendliness. Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid power systems, among others.

12

5

Share

How to Interpret Tire Codes?

For example, 215/55-R16-93H, the specific explanations are as follows: 1. Section Width: 215 (mm) refers to the width of the tire section, divided in 5mm units. The tread width of family cars generally ranges between 185-235mm, while the rear tires of sports cars can exceed 300mm to enhance grip. 2. Aspect Ratio: The slash / simply separates the preceding and following numbers, with the latter number 55 representing the aspect ratio. It is calculated by dividing the tire section height by the section width, hence the height-to-width ratio. 3. Radial Tire: The letter R stands for radial tire, which is the standard structure for family car tires. The absence of R likely indicates a bias-ply tire. The number 16 (inches) following the letter denotes the rim diameter, which, similar to the aspect ratio, affects vehicle handling, driving experience, fuel consumption, and visual appearance. 93 is the load index.

18

2

Share

Can the maintenance light of Chery EX be reset?

What does the engine MIL fault mean?

What is the maintenance schedule and content for the Toyota Corolla?

What are the symptoms of a loose motorcycle timing chain?

Why can't the van start after wading through water?

What Does Engine Control System Malfunction Mean?

How to Interpret Tire Codes?

Why does a van suddenly stall and fail to start while driving?

What is the Volkswagen Tayron 330TSI?

How many people are required for the HOV lane at minimum?

How to use the air conditioning in a Polo car?