Can the Magotan be locked without turning off the engine?

Can a Flooded Car Be Repaired?

Generally, a flooded car cannot be fully restored. Flooded vehicles are roughly categorized into three types based on the water level. The first type is when the water level reaches the wheels—such vehicles can still have practical value after repairs. The other two types are when the water level reaches the dashboard and when it submerges the roof. These are considered severely flooded vehicles, requiring costly repairs, and even after repairs, they may still pose significant risks. Insurance Coverage for Flooded Cars: 1. Submerged While Stationary: If a vehicle is submerged while stationary, the engine is usually unaffected. As long as comprehensive insurance (covering vehicle damage) is purchased, compensation can be claimed. However, if the owner impulsively attempts to start the car and drive it out of the flooded area, causing engine damage, even if they have purchased additional flood coverage, the insurance will not compensate for the engine damage. 2. Engine Failure Due to Driving Through Water: If additional flood coverage (specifically for engine damage) is purchased, the insurance company will cover the engine repair costs. On the other hand, if only comprehensive insurance is purchased without flood coverage, the insurance will only cover damages to other parts of the vehicle, excluding the engine. Additionally, if the engine is damaged due to restarting the car while submerged (secondary ignition), even with flood coverage, the insurance company will not compensate for the engine damage.

8

5

Share

How long can a private car's annual inspection be overdue without penalty?

Annual inspection can be overdue for up to 1 month without penalty. The vehicle inspection must not exceed the stipulated time frame. Inspection can be conducted 3 months in advance or delayed by 1 month. If the inspection is delayed by 2 months, the driver will be fined and penalized with 3 demerit points. Vehicle annual inspection is also known as vehicle annual check. The inspection conducted to apply for a vehicle license is called the initial annual inspection. The content of the annual inspection includes: 1. Inspection: Check if the vehicle comes with a user manual, certificate of conformity (for imported vehicles, the commodity inspection certificate), and if the factory inspection marks on the vehicle body are complete. 2. Measurement: Measure the internal and external dimensions of the vehicle, including the wheelbase and axle track. Specific measurements include vehicle length, width, height, cargo compartment height and area, wheelbase, and axle track. 3. Technical inspection: Conduct the inspection item by item according to technical standards. If passed, fill out the "Initial Inspection and Alteration Registration Form for Motor Vehicles" and record the unladen weight, load capacity, passenger capacity, and seating capacity of the driver's compartment as per the manufacturer's specifications.

17

5

Share

At what water level should you not drive your car?

The height of the air intake is the most critical indicator of a vehicle's wading depth. Once water enters the air intake, it can cause the engine to stall, and in severe cases, water can be sucked into the engine, causing permanent damage. Therefore, if the water reaches this level, you definitely should not continue driving. More relevant information is as follows: 1. Exhaust pipe height: Safe wading depth. Many people worry that water reaching the exhaust pipe might backflow. In reality, the pressure generated by the engine during exhaust is strong enough to expel any water that backflows into the exhaust pipe. As long as you don't stall the engine manually and maintain stable power, you can prevent water from backflowing into the exhaust pipe and safely pass through such water levels. 2. Half-wheel height: May cause water to enter the car. Modern cars are filled with various electronic components and sensors. If water enters the interior, it can be troublesome. Although cars today have good waterproofing and generally won't leak unless submerged for a long time, there's always a chance. If the door seals are aged and not as effective, water might seep in.

17

3

Share

What Causes the Engine Not to Start When the Water Temperature is High?

When a car's water temperature is too high and it fails to start, the issue is primarily due to component damage caused by problems in the cooling system. The car's cooling system consists of components such as the radiator, auxiliary tank, water pump, water pump belt, fan, thermostat, coolant, water passages within the engine block, and coolant pipes. In theory, a car should not be started or driven when the water temperature is excessively high. It is advisable to stop the engine and inspect the problem to prevent damage to car components that could lead to failure to start. The correct procedure when the engine is overheating due to insufficient coolant is as follows: 1. Find a safe place to pull over: Let the vehicle idle without turning off the engine, as shutting it down will stop both the cooling fan and coolant circulation, causing the engine to become even hotter. 2. Open the hood: This increases airflow, allowing the water temperature to drop. Then, slightly loosen the radiator cap to release internal steam before fully opening it. 3. Do not add coolant immediately: As physics teaches, heat causes expansion while cold causes contraction. Boiling water in a sealed container generates pressure. If the radiator cap is opened immediately after boiling, the internal pressure can cause the hot water to spray out, potentially leading to burns.

5

2

Share

What Happens When You Press the Accelerator While in Park?

Pressing the accelerator while an automatic transmission car is in Park is generally harmless. The engine will idle, and the RPM will rise rapidly, resulting in louder noise and increased fuel consumption. Automatic transmission cars simplify driving by eliminating the need for manual gear shifting, essentially making them 'foolproof' vehicles. However, driving an automatic isn't just about pressing the accelerator and brake; there are other considerations to extend the car's lifespan. More details are as follows: 1. Parking Stopper: Most parking spaces have a low stopper at the rear to guide drivers when parking. If your tires touch the stopper while reversing into a spot and you shift directly into Park (P), you may notice that shifting out of P later is difficult, accompanied by a 'click' sound and vehicle jerk. This happens because the automatic transmission's P mode engages a set of locking pins inside the gearbox, effectively locking the vehicle in place. 2. Caution: If the tires hit the stopper while the car is still moving during reversing and you shift directly into P, the force of the impact is locked into the transmission's P-mode mechanism, leaving the car in a stressed state. Shifting out of P later forces the gear lever to pry open the locked pins, causing noise and jerking, which can damage the transmission over time. The correct procedure is to shift into Neutral (N) after the tires touch the stopper, release the brake to let the car settle naturally, and then shift into P to avoid any issues.

5

0

Share

How to Convert Between Power and Horsepower?

Power is a physical quantity, while horsepower is a unit; there is no direct conversion between them. The unit of power is the watt, and the conversion between watts and horsepower is: 1 metric horsepower = 75 kilogram-force·meters/second = 735 watts. Power refers to the amount of work done by an object per unit of time, meaning power describes the rate at which work is performed. Horsepower is a commonly used unit for measuring power in engineering. Below are some driving tips: 1. Check the rearview mirrors: When turning or changing lanes, always use the turn signals, slow down, and check the rearview mirrors before turning. Left turns mainly require checking the left rearview mirror, right turns mainly require checking the right rearview mirror, and both left and right turns require checking the interior rearview mirror. 2. Don’t focus on the area directly in front of the car: When driving on clear roads, look straight ahead about 100 meters, not just at the immediate front of the car. 3. Press the clutch: Generally, when decelerating at speeds above 40 km/h, there’s no need to press the clutch first; wait until the speed drops to around 20 km/h before pressing the clutch. 4. Steering: Turn the steering wheel slowly at high speeds and quickly at low speeds.

2

Share

Can the Magotan be locked without turning off the engine?

Can a Flooded Car Be Repaired?

How long can a private car's annual inspection be overdue without penalty?

At what water level should you not drive your car?

What Causes the Engine Not to Start When the Water Temperature is High?

What Happens When You Press the Accelerator While in Park?

How to Convert Between Power and Horsepower?

Can Keyless Entry Be Installed Later?

What is Unleaded Gasoline?

Is overtaking and lane changing allowed in tunnels?

What is the definition of first inspection?