Can the license plate be retained when inheriting a vehicle?

1 Answers
DePaisley
07/25/25 5:20pm
Inheriting a vehicle allows the retention of the license plate. Here are the relevant details: Important notes: Only the original owner (individual or organization) can apply to retain the original license plate, and this right cannot be transferred to others; There is no need to inform the vehicle management office in advance to use the original license plate, as the system automatically reserves it for six months. The owner should bring identification documents, vehicle materials, and vehicle tax certificates to the vehicle management office within this period when registering a new vehicle and explain the situation to the staff. Application conditions: To apply for the use of the original vehicle license plate number, the application must be submitted within six months after the transfer or cancellation of registration; The original owner must have owned the vehicle for more than three years; All traffic violations and accident-related issues involving the original vehicle must be resolved.
Was this review help?
3
5
Share
More Forum Discussions

Where is the rear tow hook located on the ix35?

It is located at the lower part of the bumper. The exact position is usually marked in the vehicle's user manual. Owners can also identify it by observing the front and rear bumpers for a concealed space, which is covered by a round or square cap - this is where the tow hook is located. Below are detailed instructions: 1. Towing precautions: Whether using soft or hard towing tools, ensure the connection to the tow hook is secure and reliable during installation. If the tow hook has a safety latch, make sure it is properly locked. Recheck the front and rear connections before towing. When using soft towing ropes without tow hooks at both ends, tie a slip knot. A fixed knot may become difficult to untie after being subjected to strong pulling force. 2. Installation: Install the towing tool on the same side tow hook position of both vehicles. For example, if the disabled vehicle uses the left-side hook, the towing vehicle should also use the left-side hook to ensure straight-line driving. Always double-check the tow hook installation to ensure it is tightly secured, preventing the hook from disengaging and causing injury during use.
2
4
Share

What Causes Audi to Leak Antifreeze?

Audi leaking antifreeze reasons:1、Radiator damage: Car radiator damage, long-term use of the radiator can easily produce scale and harmful substances. If the car radiator is not cleaned in time, it may lead to radiator damage.2、Pipe damage: Pipe damage, if the hose is damaged, it will also cause antifreeze leakage. If it is a hose issue, it can be directly replaced.3、Loose radiator cap: Loose radiator cap, this is the owner's mistake. If it is confirmed that the antifreeze leakage is caused by a loose car radiator cap, tightening the radiator cap can perfectly solve the problem.
16
0
Share

What Causes Paint Bubbling on Car Surfaces?

The causes of paint bubbling on car surfaces may include poor paint quality or improper repainting procedures where the primer wasn't fully dry before applying the topcoat, trapping moisture between the topcoat and body filler. When exposed to high temperatures, this moisture evaporates, creating air pockets that cause the paint to bubble. Additionally, rust formation due to moisture under the paint on metal surfaces can also lead to bubbling. Here are detailed solutions for addressing paint bubbling: 1. Rust prevention treatment: Remove the bubbled paint area, apply rust prevention treatment, then fill with body filler. After allowing the filler to dry completely, sand it smooth and finally respray the paint. 2. Paint quality issues: If the bubbling results from paint quality or repainting errors, you may file a claim. It's advisable to seek assessment at certified professional repair shops or 4S dealerships for expert handling.
14
3
Share

What are the symptoms of clutch slippage?

Clutch slippage manifests in the following ways: 1. When starting the car, releasing the clutch pedal results in insufficient power or difficulty in starting; 2. While driving, the vehicle speed does not increase correspondingly with the engine speed, leading to insufficient driving power; 3. In severe cases, a burning smell may emanate from the clutch. The causes of clutch slippage include: insufficient pedal travel clearance, a broken or disconnected clutch pressure plate, or transmission oil seal leakage. Over time, oil reaching the pressure plate causes the clutch disc to wear thin, reducing the pressure on the pressure plate and resulting in slippage that prevents normal power transmission to the transmission.
8
5
Share

Is the rear wing standard on the Audi A7?

Audi A7's rear wing is standard across all models, not limited to specific trims. It automatically deploys when the speed reaches around 140km/h, and can also be manually controlled via the central console. The functions of the rear wing are as follows: 1. Generally, when the vehicle speed exceeds 60km/h, the impact of air resistance on the car becomes very noticeable. The rear wing is designed to effectively reduce and counteract the effects of air resistance during high-speed driving, creating a fourth force exerted by air on the vehicle. 2. It increases the adhesion to the ground, counteracting part of the lift force, controlling the car's tendency to rise, reducing wind resistance effects, and ensuring the car remains firmly on the road, thereby improving driving stability.
11
1
Share

What are the main causes of the abnormal noise in the Atenza?

The sunroof drain pipe is located in the B-pillar, and if the fixing clip cannot secure or fails to hold the drain pipe in place, it will produce abnormal noise during driving. Below are the specific details: 1. Replacing the clip: The drain pipe fixing clip needs to be re-secured. The interior components on the B-pillar are fixed in position using clips and fixing components. When the fixing clip lacks sufficient tension or is missing, it will cause abnormal noise. This requires replacing the clip to resolve the issue. 2. Interior components: For two adjacent interior components on the B-pillar, when driving or on bumpy roads, displacement of the parts and material properties can lead to abnormal noise. Generally, this can only be resolved by securing the parts, applying noise-proofing treatments, or replacing the components.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.