Can the license plate be retained after the car is transferred and licensed?

1 Answers
DelChloe
07/29/25 4:20pm
When a vehicle is transferred, only the car can be transferred, not the license plate number. Therefore, the original license plate can be retained. Relevant details are as follows: 1. Relevant regulations: According to regulations, after completing the transfer registration or cancellation registration of a motor vehicle, the original owner can apply to use the original license plate number when registering a newly purchased motor vehicle if they meet the conditions for retaining the license plate. 2. To apply for using the original license plate, three conditions must be met: The owner must apply within six months after completing the transfer or cancellation registration of the old vehicle. As long as the owner has owned the original vehicle for more than three years and has resolved all traffic violations and accident records related to the old vehicle, they can pass the review after submitting the application and continue using the original license plate number of the old vehicle.
Was this review help?
9
0
Share
More Forum Discussions

Can the car start with one key press if the key is not inside the vehicle?

Can the car start with one key press if the key is not inside the vehicle? The one-key start system is part of a smart car, functioning as a button device designed to simplify the starting process while also allowing the engine to be turned off. The steps to use it are as follows: 1. Sit in the driver's seat and press the start button, at which point the ACC light will illuminate, then press again for the vehicle to perform a self-check; 2. Press the brake pedal and press the one-key start button to ignite and start the engine; 3. Release the foot brake; 4. Step on the foot pedal, shift into drive, and release the handbrake; 5. Release the foot brake and press the accelerator to proceed. The functions of the one-key start system include: 1. Multiple start modes; 2. Convenience and speed; 3. Stable and reliable performance; 4. Smart entry via sensing; 5. Dual-mode free switching for smart keys; 6. Smart card backup key; 7. Intelligent silent car wash mode.
16
2
Share

Is New Car Maintenance Only Available at 4S Stores?

New car maintenance is not necessarily limited to 4S stores. The purpose of car maintenance is to filter impurities from engine oil and gasoline, preventing them from entering the engine and affecting its normal operation. Regularly replacing these components can effectively extend the engine's lifespan, maintain the car's cleanliness, ensure normal technical conditions, eliminate potential hazards, prevent faults, and slow down the deterioration process. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car. The routine maintenance items include replacing the oil filter, air filter, gasoline filter, and engine oil.
11
0
Share

What does car disc mean?

Car disc refers to the CD player. When a disc is inserted, it will display 'trackxx' indicating the track number, and 'nodisk' when no disc is present. The 'discrand' button refers to random playback within the disc, while the 'discscan' button refers to sequential playback within the disc. The buttons and their functions in a car are categorized as follows: 1. Fuel tank opening button: remotely opens the fuel tank cap from inside the car; 2. ESP switch: turns the vehicle's electronic stability program on or off; 3. Parking sensor button: activates or deactivates the car's parking sensor system; 4. Central locking button: controls the central locking system for the doors; 5. Rear sunshade button: operates the electric rear sunshade to open or close; 6. Headlight washer button: controls the automatic cleaning function of the headlights.
7
4
Share

How to Deactivate the Geely Vision Anti-Theft System?

There are two methods to deactivate the Geely Vision anti-theft system: 1. The first method involves opening the trunk lid, closing and locking all doors, inserting and removing the ignition key more than six times within 10 seconds to clear the ID stored in the remote control. Then, manually lock and unlock the driver's side door using the interior door handle. Press the 'lock' button on the remote control once to input the ID into the computer. Finally, open the driver's side door to exit the ID input mode. 2. The second method requires removing the remote control battery, pressing the 'lock' button on the remote control once, and then reinserting the battery. Close and lock all doors, and insert and remove the ignition key more than six times within 10 seconds. This action will clear all original ID numbers stored in the remote control computer, and the passing light will flash twice. Next, turn the key to the 'ACC' position and press the 'lock' button on the remote control once. The remote control computer will memorize this remote's ID. Then, open the driver's side door to exit the ID input mode. Additional instructions: 1. It is recommended to check if the Vision's anti-theft system is in silent mode. If it is, press both the unlock and lock buttons on the remote control simultaneously to exit silent mode before proceeding. 2. If the vibration alarm function is not working, it is advised to contact a service station to adjust the sensitivity adjustment knob on the anti-theft control module.
1
4
Share

Can the Wuling Hongguang S3 seats be laid flat?

Wuling Hongguang S3 seats can be laid flat, and the Wuling Hongguang S seats can be fully reclined. First, you need to pull the seatbelt out from the middle of the seat, then pull the switch located in the middle of the backrest to fold the backrest forward. Finally, pull the two black straps on both sides under the seat together, and the seat will lay completely flat. More details are as follows: 1. The Wuling Hongguang S3 offers a spacious and comfortable interior with body dimensions of 4655mm in length, 1735mm in width, and 1780mm in height (1790mm for high-end models). The side profile features blackened B, C, and D pillars, combined with a long wheelbase of 2800mm, ensuring excellent space and natural comfort for passengers. 2. Based on the 2+2+3 seating layout of the Hongguang S, the Wuling Hongguang S3 adds more adjustment options. Depending on the configuration, the third-row seats can be split 4/6, and the second and third rows can also be fully flattened, allowing flexible cargo space transformation. Paired with a front-engine, rear-wheel-drive layout, 1.5L and 1.5T engines, larger tires, and a ground clearance of 208mm, the Wuling Hongguang S3 boasts outstanding loading capacity and strong adaptability to various road conditions.
3
2
Share

Should the Positive or Negative Terminal Be Disconnected When Cutting Off Power to a Car?

When cutting off power to a car, it is necessary to disconnect the negative terminal, not the positive one, and there is no need to disconnect both terminals. This is because as long as one end is disconnected, the circuit cannot form a loop, and no further power will be consumed. If you want to disconnect both the positive and negative terminals, or replace the battery, you should also disconnect the negative terminal first, followed by the positive terminal. During installation, connect the positive terminal first, then the negative terminal. The specific reasons are as follows: 1. Reason for disconnecting the negative terminal first: The car's negative terminal is connected to the body, which is made of metal. The entire car body serves as the negative terminal, meaning the body itself functions as the negative terminal. This way, the negative terminal of any electrical component only needs to be connected to the body (ground), and the current will return to the negative terminal through the body. This eliminates the need to run a separate wire from each component to the negative terminal, significantly reducing the amount of wiring and simplifying circuit troubleshooting. 2. Consequences of disconnecting the positive terminal first: If the positive terminal of the battery is disconnected, since the wrench is made of metal and conducts electricity, accidentally touching a metal part of the car body during the disconnection process would be equivalent to directly connecting the battery's positive terminal to the negative terminal, causing a short circuit.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.