Can the Lavida be equipped with a multifunction steering wheel?

Should You Shift Gear First or Release the Handbrake First in a Car?

The starting sequence is the same for both automatic and manual transmission cars: you should shift into gear first and then release the handbrake. After engaging the gear, the power transmission path of the gearbox will be connected. When you first shift into gear, the transmission is in first gear, where the torque is at its maximum. If the brake is not properly applied, the car might suddenly lurch forward. The correct sequence for starting a car is: shift into first gear, release the handbrake, gently press the accelerator, and slowly release the clutch. The sequence for stopping a car is: press the brake to bring the vehicle to a stop, shift into neutral, engage the handbrake, and then turn off the engine before exiting the vehicle. Manual transmission car braking techniques: When braking in a curve, you must brake before entering the curve to reduce speed. Accelerate when exiting the curve. If you need to brake while in the curve, adjust the braking force according to the vehicle's arc to avoid skidding or drifting. Avoid slamming on the brakes! When going uphill, if you brake too hard, the vehicle will slow down quickly. Therefore, when braking on a slope, unless there are special circumstances, you should tap the brake and release it faster than usual to prevent the car from rolling back or being rear-ended due to excessive slowing. Note that for manual transmission cars, you should shift gears promptly after braking and avoid using high gears when climbing hills. When going downhill, the brake serves as an auxiliary tool for slowing down and should not be pressed continuously. Continuous braking may cause the brake pads to overheat, leading to brake failure. Generally, manual transmission cars should use third gear to maintain a stable speed. For automatic transmission cars, switch to manual mode and adjust the gear according to the slope (some cars have up to seven gears, so it's hard to specify). The brake's role here is to assist in controlling speed—avoid relying solely on the brake to manage speed.

14

1

Share

Can a Truck Run Without Urea?

Truck (i.e., freight vehicle) can continue to run without urea, but it needs to be replenished as soon as possible. The following impacts will occur if a truck runs without urea: The urea pump is prone to crystallization and clogging: If a truck runs without urea for a long time, the circulating urea pump nozzle, pipelines, and urea pump are prone to crystallization, clogging, or high-temperature damage. Torque will be limited: If a truck runs without urea, the emission light will turn on, torque will be limited, resulting in insufficient power, and the truck will feel sluggish. Annual inspection will fail: A truck without urea will fail the annual inspection and may face penalties. Urea has a catalytic function for large vehicles. Adding urea is necessary for vehicles with diesel engines because diesel engines emit harmful nitrogen oxide gases, causing environmental pollution. Long-term inhalation of such exhaust gases poses significant harm to human health. To reduce this harm, vehicles with diesel engines must use urea.

10

5

Share

How to Turn on the BYD Air Conditioner?

Method to turn on the BYD air conditioner: 1. Start the car first, then locate the air conditioning control area on the center console; 2. The knob on the left controls the direction of the air vents; 3. The knob in the upper right corner adjusts the temperature of the air conditioner; 4. Turning it clockwise increases the temperature; 5. The knob at the bottom controls the fan speed. BYD is a Chinese automotive brand, and its product lineup includes the BYD Qin, the all-new Tang, the all-new Song, the BYD Yuan, the Song MAX, the BYD F3, the Surui, the Sirui, and the Flyer. Among these, the BYD F3 is an A+ class passenger vehicle produced by BYD Auto. In terms of body dimensions, it measures 4533mm in length, 1705mm in width, and 1490mm in height, with a wheelbase of 2600mm.

5

3

Share

How long can the license plate be retained after a vehicle is scrapped?

After a vehicle is scrapped, if its license plate has been used on the original vehicle for more than one year, it can be retained for two years. This means the original plate number can be used for vehicle registration within one year. License plates, commonly known as vehicle plates, refer to the plates hung on the front and rear of a vehicle. They are typically made of aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information. License plates serve as identification and information registration for vehicles, allowing people to determine the vehicle's region of registration and access details about the vehicle's owner and registration information based on the plate number.

4

3

Share

Are Coolant and Antifreeze the Same Thing?

Coolant and antifreeze are not the same thing. The full name of coolant is antifreeze coolant, which is a coolant with antifreeze functionality. As the name suggests, it has two main functions: first, antifreeze, and second, cooling. Antifreeze prevents the coolant from freezing and expanding in cold winter conditions, which could otherwise crack the radiator or damage the engine block or cylinder head. Many car owners believe that antifreeze is only used in winter, but in fact, antifreeze should be used year-round. Coolant consists of three components: water, antifreeze agents, and additives. Depending on the type of antifreeze agent, coolant can be classified into alcohol-based, glycerol-based, ethylene glycol-based, and other types.

5

3

Share

What does it mean when the auto start-stop indicator turns yellow?

When the auto start-stop indicator turns yellow, it indicates that the function is turned off. If it's green, it means the function is normally activated and working. Auto start-stop, or engine auto start-stop, is a system that automatically shuts off the engine when the vehicle comes to a temporary stop (such as at a red light) and automatically restarts the engine when it's time to move forward again. The working principle of the start-stop system is that when the vehicle stops moving due to traffic congestion or at an intersection, the driver presses the brake pedal to stop and shift to neutral. At this point, the start-stop system automatically detects that the engine is idling and not in gear, the wheel speed sensors of the anti-lock system show zero, and the electronic battery sensor indicates there's enough energy for the next start. When these three conditions are met, the engine automatically stops rotating.

11

2

Share

Can the Lavida be equipped with a multifunction steering wheel?

Should You Shift Gear First or Release the Handbrake First in a Car?

Can a Truck Run Without Urea?

How to Turn on the BYD Air Conditioner?

How long can the license plate be retained after a vehicle is scrapped?

Are Coolant and Antifreeze the Same Thing?

What does it mean when the auto start-stop indicator turns yellow?

How to Properly Check Car Engine Oil?

Can a Temporary License Plate Be Used to Drive to Another Province?

What to Do If You Forget to Bring Your Vehicle License and Get Stopped by Traffic Police?

What causes abnormal noise and failure to start when using the electric starter on a motorcycle?