Can the Kawasaki Z1000 reach 299 km/h?

2 Answers
OLily
08/27/25 2:16am
No. The top speed can reach 170 km/h. Below are the relevant details: Introduction: Kawasaki is known for its aggressiveness, overpowering other models in the same class with its robust performance. The Z1000 is an outstanding liter-class street bike and one of the more popular Japanese motorcycles in the domestic market, often referred to by riders as the "Big Viper"! Configuration: The Z1000 features a steel tube frame, which not only reduces the bike's weight but also ensures the engine is more stably mounted within the frame, allowing for better power output and showcasing its performance capabilities. The front suspension uses SHOWA forks, with one side adjusting damping and the other adjusting preload—a setup widely used among bikes in the same class.
Was this review help?
7
5
Share
DiElijah
09/08/25 9:01am
I've ridden the Kawasaki Z1000 quite a few times, and its top speed is actually capped at around 240 to 250 km/h—it simply can't reach 299. Achieving that would require an extremely powerful engine, lightweight construction, and low aerodynamic drag. But the Z1000 is a naked bike with around 140 horsepower and significant air resistance. Under normal riding conditions, pushing it to 250 km/h is already a struggle. I remember once going full throttle on the highway—the speedometer got stuck at 248 km/h, and the wind pressure felt like it was about to lift me off the bike. Modifications like adding a turbocharger might give a slight boost, but they come with high risks. I've seen a friend lose control after modifications, resulting in a wrecked bike and injuries. So don't expect the stock version to hit 299 km/h—focus on safe riding and enjoying the thrill of motorcycling instead. Obey speed limits and always wear proper gear—that's the real key.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

What is the reason for the rattling sound when the Lavida's air conditioning is turned on?

If the drive belt is too loose, the electromagnetic clutch is prone to slipping; if the drive belt is too tight, the load on the electromagnetic clutch will increase. When the tension of the drive belt is improper, it may cause the compressor to stop working in mild cases, or even damage the compressor in severe cases. When the drive belt is operating, if the compressor pulley and the generator pulley are not on the same plane, it will reduce the lifespan of the drive belt or the compressor. Identification: During operation, various vibrations in the car's mechanisms can produce different types of sounds. However, the presence of sounds does not necessarily indicate a fault in the car. To avoid unnecessary disassembly, it is essential to first distinguish between normal and abnormal sounds. Additional information: The air conditioning filter should be replaced regularly. Generally, when driving in urban conditions, the air conditioning filter needs to be replaced every 3,000 kilometers or so. This not only keeps the intake system cleaner but also prevents a decrease in cooling capacity due to a clogged air conditioning filter.
14
0
Share

Is the Wrangler a unibody vehicle?

The Wrangler is not a unibody vehicle. Unibody vehicles lack a separate frame, as the body itself serves as the mounting base for the engine and chassis components, functioning as both the body and frame while bearing all loads. Taking the 2021 Wrangler as an example, its dimensions are: length 4334mm, width 1894mm, height 1839mm, with a wheelbase of 2459mm, minimum ground clearance of 251mm, fuel tank capacity of 70 liters, and a curb weight of 1843kg. The 2021 Wrangler is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 266PS, maximum power of 195.4kW, maximum torque of 400Nm, paired with an 8-speed automatic transmission.
1
3
Share

Where is the PCV valve located on the Baojun 730?

The PCV valve of the Baojun 730 is located inside the crankcase. Here are the specific details: Function of the PCV valve: During the end of the engine's combustion process, some unburned mixture leaks into the crankcase from the piston rings under high pressure. These blow-by gases can escape into the atmosphere, causing pollution. If these gases are not expelled, they can dilute the engine oil in the crankcase, leading to oil degradation and premature wear of engine components. Therefore, a PCV valve is installed on the valve cover to allow these exhaust gases to re-enter the engine through the intake manifold for re-combustion. Working principle of the PCV valve: The PCV valve is controlled by vacuum. When the engine is idling, the intake manifold generates vacuum, which overcomes the spring force to hold the plunger in place, preventing the flow of exhaust gases. At high speeds, the spring force presses the plunger, also preventing the flow of exhaust gases. At medium speeds, the vacuum suction from the engine's intake manifold overcomes half of the spring force, causing the plunger to oscillate within the valve body, allowing the exhaust gases to flow into the intake manifold.
20
2
Share

What are the body dimensions of the BYD F3?

The body dimensions of the BYD F3 are 4533mm, 1705mm, and 1490mm. BYD F3 specifications: The wheelbase is 2600mm; the third-generation F3 has body dimensions of 4617mm, 1716mm, and 1480mm, with a wheelbase of 2615mm, all typical of a compact sedan. The BYD F3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109 hp and a maximum torque of 148Nm. BYD F3 design philosophy: The design philosophy of the F3 draws on the successful experience and the "mm" design concept (which means maximizing the space for passengers while minimizing the space occupied by mechanical components) of Japanese and Korean car development. This concept runs through the entire design of the F3. BYD F3 greatest strengths: High cost-performance ratio; spacious interior; stylish and elegant exterior; high-end models are richly equipped.
3
0
Share

Differences Between Emgrand GL and New Emgrand?

Differences between Emgrand GL and New Emgrand are as follows: 1. Different exterior dimensions 1. Emgrand GL: The vehicle dimensions are 4725×1802×1478mm (L×W×H) with a wheelbase of 2700mm. 2. New Emgrand: The vehicle dimensions are 4631×1789×1470mm (L×W×H) with a wheelbase of 2650mm. 2. Different launch dates 1. Emgrand GL: Officially launched on September 20, 2016. 2. New Emgrand: The Geely New Emgrand Million Edition was officially launched on October 25, 2016. 3. Different performance configurations 1. Emgrand GL: Equipped with 1.3T and 1.8L engines, paired with Getrag 6DCT dual-clutch transmission and Aisin 6-speed manual transmission. 2. New Emgrand: Newly equipped with 1.3T GeTec DVVT turbocharged engine, with a maximum power of 98kw, turbo intervention at 1800 rpm, and peak torque output of 185NM at 2000 rpm.
4
1
Share

How to Use the Cruise Control in the Passat?

The method to use the cruise control in the Passat is: 1. Pull the sliding button on the cruise control lever to the 'on' position; 2. Accelerate or control the speed to maintain the desired speed setting; 3. Press the 'set' button at the top of the lever. Taking the 2020 Passat as an example, it is a mid-size sedan with body dimensions of: length 4933mm, width 1836mm, height 1469mm, wheelbase 2871mm, and curb weight of 1470kg. The 2020 Passat features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.