···
Log in / Register

Can the In-Car Monitoring in NIO Vehicles Be Turned Off?

4 Answers
LaTheo
07/29/25 8:26am
No. The in-car monitoring system does not compromise the privacy of the vehicle owner. Audio and video recordings are only captured under specific circumstances to provide protection for the owner. In the event of disputes inside the vehicle, the footage captured by the camera can also serve as evidence. Below is some relevant information about NIO: 1. NIO is a Chinese smart electric vehicle company: Established in 2014, it primarily provides customers with high-performance smart electric vehicles and aims to create a joyful lifestyle. In 2016, NIO launched its electric vehicle EP9 under the English brand name 'NIO.' In 2018, NIO's mass-produced vehicle, the ES8, officially hit the market. This is a high-performance, seven-seat, all-electric SUV. 2. In terms of configuration: The ES8 features a 2+3+2 seating layout, with a vehicle length of 5 meters and a wheelbase exceeding 3 meters. It comes standard with active air suspension and is equipped with dual motors (front and rear), featuring a four-wheel-drive system that offers agile handling.
Was this review help?
7
3
Share
DeJeremiah
08/12/25 5:18am
NIO's in-car monitoring can indeed be turned off. As someone who has driven this car, I often operate it in the system settings. Specifically, you need to open the central control screen menu, find the security or privacy settings section, and then click on the monitoring options to disable the camera and sensor functions. I've turned it off a few times, mainly because I didn't want to be constantly reminded of fatigue driving during long trips—it felt a bit annoying. To be honest, though, this monitoring is quite useful as it helps detect if I'm distracted or dozing off, especially on highways, reducing the risk of accidents. So, I recommend keeping it on most of the time and only turning it off when necessary. Remember to regularly check if the settings automatically reset after software updates, as privacy concerns can range from minor to significant. Turning it off might reduce some system alerts, but it doesn’t affect the overall driving experience. In short, the operation is simple, and there are tutorials available in the owner's app for reference.
Was this review help?
19
4
Share
Expand All
VonJoel
10/05/25 6:18am
Turning off NIO's monitoring technology isn't technically difficult. For someone like me who's familiar with infotainment systems, it's just a matter of navigating through the touchscreen settings. Simply go to the vehicle control menu, select driver assistance or privacy management, and you can disable features like driver status monitoring. The exact steps vary slightly between models - SUVs might require a few extra taps, but the core principle is that the sensors stop working once disabled. I've personally tested this during my car experiments and found the absence of those alert sounds quite peaceful, though I'd advise against over-reliance on deactivation since you might miss critical warnings in emergencies. These monitoring features were designed with safety as the top priority - disabling them won't affect basic functionality but may reduce feedback. I recommend users first consult the manual or online tutorial videos to learn the proper procedures.
Was this review help?
5
2
Share
Expand All
GideonFitz
11/18/25 7:50am
NIO's monitoring can be turned off, but I don't recommend keeping it off all the time. Having it on constantly reminds me of safe driving habits, especially during night driving when fatigue is common - that beeping sound has been a great help. You can turn it off in the settings under privacy or safety options. Turning it off doesn't make much difference, you just lose real-time feedback. As a driver, safety is what really matters.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

What is the reason for the belt noise when the air conditioner is turned on but stops after a while?

If the belt makes noise when the air conditioner is turned on but stops after a while, it may be caused by belt slippage. Here are detailed explanations on how to resolve belt noise issues: 1. Check the belt: Inspect whether the driven accessories have bearing damage, jamming, looseness, or increased power demand. 2. Replace the belt: This type of noise is often caused by the contact surfaces between the belt and pulley becoming too smooth. Replace the belt or use 100-grit sandpaper to roughen the contact surfaces of the pulley and belt. 3. Temporary solution: You can apply 1-2 drops of engine oil to the contact surfaces between the belt and pulley.
17
1
Share

What are the reasons for the high fuel consumption of Tianyu SX4?

Tianyu SX4 generally has low fuel consumption. The reasons for high fuel consumption include engine carbon deposits, spark plug failure, or abnormal tire pressure. Below are the specific reasons: Engine carbon deposits: During long-term operation of the car, gasoline inevitably produces carbon deposits and sludge during combustion. If these sludge and carbon deposits are not cleaned in time, they will lead to increased fuel consumption. Spark plug failure: The function of the car's spark plug is to generate an electric spark with high voltage to ignite the air-fuel mixture. If damaged, it will reduce the ignition energy, causing uneven combustion of the mixture, which will result in slower acceleration and increased fuel consumption. Abnormal tire pressure: Abnormal tire pressure can also affect the car's fuel consumption. When the tire pressure is too low or the tread is severely worn, the contact area between the tire and the road surface increases, leading to greater friction, higher rolling resistance, and naturally higher fuel consumption.
7
1
Share

Why does the bulb fault light on the Volkswagen Sagitar stay on?

The bulb fault light on the Volkswagen Sagitar usually indicates that a bulb on the vehicle is not working or has malfunctioned. Solution: Check the lights yourself or have a 4S shop diagnose and fix the lighting issue, then replace the faulty bulb. The Sagitar's bulb fault light will automatically turn off without needing a reset. Below is a detailed introduction to vehicle indicator lights: 1. Seat Belt Indicator: This light shows whether the seat belt is locked. When it lights up, it means the seat belt is not properly fastened. Some models may also emit a warning sound. The light turns off once the seat belt is fastened. 2. Door Indicator: This light displays the status of the vehicle doors. If any door is not closed or not properly closed, the corresponding door indicator will light up to alert the driver. The light turns off when the door is closed properly. 3. Oil Pressure Indicator: This light shows the oil pressure status in the engine. It lights up when the ignition is turned on and the vehicle performs a self-check, then turns off after the engine starts. If it stays on, it indicates the engine oil pressure is below the required standard and requires maintenance. 4. Fuel Level Indicator: This light shows the amount of fuel in the vehicle. It briefly lights up during the self-check when the ignition is turned on and then turns off. If it stays on after starting the engine, it means the fuel level is low. 5. ABS Indicator: This light shows the status of the ABS system. It lights up for a few seconds during the self-check when the ignition is turned on and then turns off. If it doesn't light up or stays on after starting, it indicates an ABS malfunction. 6. Handbrake Indicator: This light shows the status of the handbrake. It is usually off. When the handbrake is engaged, the light turns on and turns off when the handbrake is released. Some models may emit a warning sound if the handbrake is not released while driving. 7. Coolant Temperature Indicator: This light shows the temperature of the engine coolant. It lights up briefly during the self-check when the ignition is turned on and then turns off. If it stays on, it means the coolant temperature exceeds the safe limit, and the vehicle should be stopped immediately. The light turns off when the temperature returns to normal. 8. Brake Pad Indicator: This light shows the wear status of the brake pads. It is usually off. If it lights up, it indicates a problem with the brake pads or excessive wear. The light turns off after the issue is resolved. 9. Airbag Indicator: This light shows the status of the airbag system. It lights up briefly during the self-check when the ignition is turned on and then turns off. If it stays on, it indicates an airbag malfunction. 10. Battery Indicator: This light shows the status of the battery. It lights up during the self-check when the ignition is turned on and turns off after the engine starts. If it stays on after starting, it indicates a problem with the battery that requires replacement.
12
0
Share

What to do when the driver's license has not been renewed for one month after expiration?

When a driver's license has not been renewed for one month after expiration, you should promptly visit the relevant department to handle the renewal. However, if you continue to drive a motor vehicle with an expired license, you will be fined between 200 and 500 yuan. Below is a detailed introduction regarding the situation of not renewing a driver's license for one month after expiration: 1. Penalty method: Article 95 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" stipulates: If a motor vehicle driver obtains a replacement driver's license through concealment or deception while the original license is lawfully seized, detained, or temporarily suspended, the traffic management department of the public security organ shall impose a fine of between 200 and 500 yuan. 2. Others: If a motor vehicle driver's physical condition changes and becomes unsuitable for driving, yet they continue to drive, or if they fail to undergo the required review and still drive, and meet the corresponding conditions, the traffic management department of the public security organ shall revoke the motor vehicle driver's license.
6
5
Share

Is it necessary to clean carbon deposits in old cars?

It is necessary to clean carbon deposits in old cars for the following reasons: 1. The best time for carbon deposit cleaning: As long as it is a fuel-powered vehicle, carbon deposits will be generated. There is no strict regulation on the cleaning time for carbon deposits. When the mileage is between 10,000 to 20,000 kilometers, the carbon deposits reach a saturated level, which is the best time for carbon deposit cleaning. 2. The generation of carbon deposits: The generation of carbon deposits is related to the length of the journey. If the journey is too short, the car is always in a cold running-in state, making it difficult to reach the car's normal operating temperature, which will result in more carbon deposits. 3. Personal habits: Frequently refueling at private gas stations where many fuel products are unqualified can also lead to a large amount of carbon deposits.
7
1
Share

What is the battery capacity of Tesla Model Y?

Tesla Model Y is equipped with a 77kWh ternary lithium battery pack, with an energy density of 161Wh/kg and an NEDC range of 594km. Tesla Model Y is a compact SUV developed by Tesla, available in four variants: Standard Range, Long Range, Dual Motor All-Wheel Drive, and Performance. Additional Information: 1. Configuration: Model Y shares 75% of its parts with Model 3, is approximately 10% larger in size, has a slightly shorter range than Model 3, and offers both single-motor rear-wheel drive and dual-motor all-wheel drive options. 2. Acceleration Performance: The Standard Range variant accelerates from 0-96km/h in 5.9 seconds with a top speed of 193km/h; the Long Range rear-wheel drive variant accelerates in 5.5 seconds with a top speed of 209km/h; the Dual Motor All-Wheel Drive variant accelerates in 4.8 seconds with a top speed of 217km/h; and the Dual Motor All-Wheel Drive Performance variant accelerates in 3.5 seconds with a top speed of 241km/h.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.