Can the Green License Plate Be Retained When Switching to a New Energy Vehicle?

How to Repair a Dented Car Bumper?

To repair a dented car bumper, you can pour boiling water over the dented area to restore the deformed body. Once the dent returns to its original shape, immediately use cold water to shrink and restore the rubber. The bumper consists of an outer panel, cushioning material, and a crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by cold-rolled thin sheets pressed into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is then connected to the vehicle's frame longitudinal beams with screws. Additional information: Below are the functions of a car bumper: 1. Protective role: It absorbs and mitigates external impact forces during collisions, providing cushioning to protect both the vehicle and its occupants. 2. Decorative role: It harmonizes with the vehicle's body design, offering good aesthetic appeal.

8

2

Share

What is the difference between front-wheel drive, rear-wheel drive, and four-wheel drive?

The difference between four-wheel drive and rear-wheel drive lies in the number of driven wheels and handling characteristics. Here is some relevant knowledge about four-wheel drive systems: Definition of four-wheel drive system: Four-wheel drive means that all four wheels of the car can receive driving force. In this way, the engine's power is distributed to all four wheels, making it less likely for the wheels to slip when encountering poor road conditions, and significantly improving the vehicle's off-road capability. Four-wheel drive systems are mainly divided into two categories: part-time four-wheel drive and full-time four-wheel drive. Classification of four-wheel drive systems: There are three common types of four-wheel drive systems in cars: on-demand four-wheel drive, full-time four-wheel drive, and part-time four-wheel drive. Full-time four-wheel drive systems are often seen in luxury SUVs and high-performance sedans. Cars equipped with full-time four-wheel drive have power distributed to all four wheels at all times. This type of four-wheel drive system can enhance the mechanical grip of the wheels. Part-time four-wheel drive systems are often seen in rugged off-road vehicles. Cars equipped with part-time four-wheel drive have three modes: high-speed four-wheel drive, low-speed four-wheel drive, and high-speed two-wheel drive.

15

3

Share

How is vehicle damage calculated?

Vehicle damage is calculated using the formula: Vehicle Damage Insurance Premium = (Base Premium + Vehicle Purchase Price * Rate) * Discount Factor. Below is an introduction to auto insurance: 1. Introduction: Motor vehicle insurance is a type of commercial insurance that covers liability for personal injury or property damage caused by natural disasters or accidents involving motor vehicles. 2. Content: The insured clients are mainly legal entities and individuals who own various types of motor vehicles. 3. Scope: The insurance primarily covers various types of automobiles but also includes specialized vehicles such as electric cars, battery-powered vehicles, and motorcycles.

18

5

Share

Is the Best Way to Remove Odors from a New Car by Leaving It in the Sun?

The best way to remove odors from a new car is not by leaving it in the sun. Here are some methods for removing odors from a new car: 1. Method one: Ventilation and sunlight exposure. Leaving the windows slightly open to maintain air circulation inside the car is key to odor removal. If you have an underground garage at home, it's recommended not to park the car there initially; instead, park it in a well-ventilated outdoor area. Additionally, frequently opening and closing the car doors when possible helps increase air circulation speed. 2. Method two: Use activated charcoal bags and micro-control. 3. Method three: Using fruit peels or fragrances—this varies according to personal preference. The best time for car owners to remove odors and formaldehyde is during the summer.

16

3

Share

What are the reasons for slow and insufficient cooling in car air conditioning?

Here are the reasons for slow and insufficient cooling in car air conditioning: 1. Insufficient refrigerant due to low refrigerant levels: The main cause of refrigerant shortage is usually minor leaks in the system. If there is insufficient refrigerant in the air conditioning system, the amount of refrigerant sprayed into the evaporator from the expansion valve will also decrease. Consequently, when the refrigerant evaporates in the evaporator, the amount of heat absorbed will decrease, leading to reduced cooling capacity. 2. Moisture infiltration in the air conditioning refrigeration system causing insufficient cooling: There is a component in the refrigeration system called the dryer (or receiver-drier), whose main function is to absorb moisture from the refrigerant to prevent excessive moisture in the refrigerant, which would reduce cooling capacity.

4

3

Share

How to Remove the Headrest of the 2020 Volkswagen Bora?

The removal of the front headrests for the 2020 Volkswagen Bora is relatively simple. On the upper back of the seatback, you can feel a recessed area. Press and hold this area upwards while pulling the headrest firmly upwards to remove it. After installing the headrest cover, position the headrest onto the headrest guide rods, then insert it into the corresponding seatback guides. Push the headrest downwards until the guide rods lock into place. Below is relevant information: The method for removing Volkswagen Bora seats is as follows: 1. Front Seat Removal: There are four screws in total for the front seats. Move the seat to the frontmost position and locate the two screws at the rear of the slide rails. Remove these screws, then move the seat to the rearmost position and remove the two screws at the front of the slide rails. The seat can then be removed. If the seat has heating or electric adjustment, remember to disconnect the wiring. 2. Rear Seat: There is one clip on each side at the front of the rear seat. Lift the left side of the seat firmly upwards, then do the same for the right side. You will see that the seat can move freely, then pull it forward to remove. 3. Rear Seatback: Remove the two headrests from the rear seatback, and you will see four round holes securing the headrests. Remove all of them, then lift the seatback firmly upwards. Note: To remove the four round holes, use a flashlight to look inside the holes; you will find clips. Insert a screwdriver into the outer side of the hole and gently pry inward, then pull the round hole outward to remove it.

8

3

Share

Can the Green License Plate Be Retained When Switching to a New Energy Vehicle?

How to Repair a Dented Car Bumper?

What is the difference between front-wheel drive, rear-wheel drive, and four-wheel drive?

How is vehicle damage calculated?

Is the Best Way to Remove Odors from a New Car by Leaving It in the Sun?

What are the reasons for slow and insufficient cooling in car air conditioning?

How to Remove the Headrest of the 2020 Volkswagen Bora?

Symptoms and Judgment Methods of Damaged Car Bearings

Under what circumstances should the car anti-skid button be used?

What is the function of a fuel filter?

Is an operating permit required to drive for Didi?