Can the GPS removed from the car still be used?

2 Answers
LaRicardo
09/09/25 3:32am
GPS devices removed from cars can still be utilized. Here are the specific details about GPS trackers: Installation locations: Vehicle GPS devices are usually installed in relatively hidden places, such as front and rear bumpers, inside the trunk, inside the center console, under the passenger seat, in the glove compartment, or in door storage compartments. Functions: GPS trackers use GPS satellite positioning terminals to accurately locate remote targets (vehicles), track them in real-time, enable remote monitoring, and provide anti-theft and anti-hijacking features. The difference between GPS trackers and car navigation systems is that navigation systems provide location and driving routes, while GPS trackers can record driving habits or broadcast locations in real-time.
Was this review help?
15
3
Share
EmilioLee
09/20/25 8:20am
I think the dismantled GPS can definitely be reused. If you enjoy tinkering like me, the removed GPS is actually a treasure—it's usually just a small navigation module that requires a power source to function. So, you need to find a power supply for it. For example, try plugging it into a 12V power adapter connected to a regular household outlet. As for functionality, it might not have real-time map updates anymore, but basic navigation should still work, making it suitable as a backup navigator at home or for emergency travel use. I've even tried modifying it for use on a bicycle—mounting it with a cheap bike holder and powering it with a portable charger, which worked quite well. The key is to check if it's damaged and to open it up to see if the internal connections are intact. Overall, recycling and reusing not only saves money but also reduces electronic waste, benefiting the environment.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

What does it feel like when ABS engages during braking?

ABS engagement is distinctly noticeable, most directly felt as strong vibrations in the brake pedal. Here is more information about ABS: 1. The function of the anti-lock braking system is to control braking force, preventing wheel lock-up during hard braking. It operates at the edge of the tire's friction limit to provide maximum braking performance while maintaining some vehicle control. 2. Hard braking on wet asphalt roads after rain easily activates the ABS system. Once activated, the ABS indicator light on the dashboard will illuminate, followed by noticeable vibrations in the brake pedal (commonly referred to as 'kicking back'). You'll also hear a chattering sound from the tires gripping and releasing the road surface.
13
0
Share

What is the difference between wet clutch and dry clutch?

Here are the main differences between wet clutch and dry clutch: 1. The connection medium between the driving plate and the driven plate of the clutch is different: dry clutch relies on air, while wet clutch relies on oil. 2. Different cooling methods: dry clutch mainly relies on air cooling, and its cooling performance is not as good as that of wet clutch, so dry clutch is prone to damage and is not as durable; wet clutch absorbs heat through the transmission oil that soaks the clutch plates. 3. Different advantages: the main advantages of dry clutch are simple structure, low cost, and lower maintenance and repair costs, making it more economical and practical; the advantages of wet clutch are long service life and generally no failure, unless the operating procedures are violated or the clutch is often operated in a semi-clutch state.
13
5
Share

What is the reason why the interior light stays on and cannot be turned off?

The reasons why the interior light stays on and cannot be turned off are as follows: 1. It may be in the always-on mode: Generally, there is a button next to the light on the top of the cabin with three modes, namely ON (always-on mode), DOOR (light turns on when the door opens and off when it closes), and OFF (off mode). It is usually set to DOOR mode, where the light automatically turns on when the door is opened and off when it is closed. If the button is set to ON, the light will remain on and needs to be manually turned off. 2. The light on the top of the cabin may not turn off if the door is not properly closed, so the door status should be checked: Some car interior lights can be pressed to turn on or off, a feature many car owners are unaware of. You can try pressing the light on your car's ceiling to see if it operates this way.
10
0
Share

Is a Faulty Transmission Valve Body Considered a Major Overhaul?

Below are the key indicators that an engine requires a major overhaul: 1. Cylinder pressure difference: The cylinder compression pressure should meet the original design specifications. Use a tachometer and cylinder pressure gauge to check. If it does not meet the requirements, it is considered unqualified. The pressure difference between each cylinder should not exceed 8% of the average pressure of all cylinders. Measure with a tachometer, cylinder pressure gauge, or engine diagnostic analyzer. When the cylinder pressure of a Hyundai Elantra engine falls below its standard value, severe black smoke emission may occur. 2. Significant idle fluctuation: The engine should run stably at idle speed, with the speed conforming to the original design specifications. The speed fluctuation should not exceed 50 rpm. Conduct a running test with a tachometer or measure with an engine diagnostic analyzer. 3. Low power: The engine's maximum power should not be less than 90% of the originally designed rated value. Measure with a dynamometer according to relevant regulations. 4. Fuel consumption rate: The engine's minimum fuel consumption rate should not exceed the original design requirements. Measure with a fuel consumption meter. 5. Low torque: The engine's maximum torque should not be less than 90% of the originally designed rated value. Check with a dynamometer according to relevant regulations. Severe loss of working capacity should prompt a major overhaul.
3
1
Share

What to Do When There is a Shock When Starting in D Gear with an AT Transmission?

Here is an introduction about the shock when starting in D gear with an AT transmission: 1. The engine speed is too high. For example, when the engine speed is too high during a cold start, the torque converter will transmit more power, resulting in a greater impact force and more noticeable shaking when shifting gears. 2. The brake is not pressed firmly. When shifting gears, the engine's power is directly transmitted to the wheels. If the brake is not pressed firmly, the wheels will slightly move, causing the vehicle to suddenly move forward with a strong shaking sensation. 3. Releasing the brake too early when waiting at a red light. When the light turns green, shifting into drive and releasing the brake to start moving can cause the vehicle to suddenly lurch forward violently. This happens because the brake is released too early, causing a sudden combination of power.
6
2
Share

What does the Auto button in the car mean?

Auto translates to "automatic" in English. Here is more information about the Auto button in the car: 1. Auto switch for automatic air conditioning: On an automatic air conditioning system, pressing the Auto switch allows the air conditioning to automatically adjust the temperature and airflow inside the cabin. 2. Auto switch for wipers: If there is an Auto switch on the wiper control, it indicates that the vehicle is equipped with rain-sensing wipers. Setting the wiper to the Auto position enables the wipers to detect the size of raindrops via a rain sensor and automatically adjust the wiper speed. 3. Auto switch for lights: An Auto switch for lights means the vehicle has automatic headlights. When the light switch is set to the Auto position, the headlights can sense changes in ambient brightness via a light sensor and automatically turn on when it gets dark outside. 4. Auto switch for windows: The Auto switch on the driver's door window control indicates one-touch up/down functionality. Pressing the Auto switch all the way down and releasing it will automatically open the window completely, while pulling the Auto switch all the way up and releasing it will automatically close the window completely. To stop the window midway, pull or press the Auto switch in the opposite direction and release it. 5. Autohold switch: Located near the gear lever, the Autohold switch (sometimes simply labeled as Auto or with a circle containing an "A" symbol) activates the automatic parking brake function. This feature automatically applies the handbrake when the vehicle is temporarily stopped, such as at a traffic light, eliminating the need to manually engage the handbrake.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.