Can the Geely Vision use xenon headlights for low beam?

2 Answers
VanGabrielle
07/24/25 8:05am
Geely Vision can use xenon headlights for low beam, but it requires professional modification. Advantages of modifying xenon headlights: After modification, the vehicle's lighting effect will be improved. Xenon headlights have a longer lifespan than halogen lights, and their color temperature provides higher comfort, effectively reducing driver's visual fatigue and significantly enhancing driving safety. Precautions for modifying xenon headlights: Do not install the ballast near a heat source; it can be mounted on the bumper to aid in heat dissipation. During installation, ensure the wiring of the dedicated harness is as aesthetically pleasing as possible and avoid connecting it to heat sources to prevent wire short circuits or breaks due to excessive temperature.
Was this review help?
20
4
Share
KinsleyAnn
08/11/25 3:42am
As someone experienced in car modifications, I believe the Geely Vision's low beam headlights can be upgraded to xenon HID lights, but caution is required. The stock setup likely uses halogen bulbs, and switching to xenon can enhance brightness and color temperature, improving nighttime visibility—sounds appealing. However, before proceeding, technical details must be considered: you'll need to install projectors to focus the beam and prevent glare for oncoming traffic, along with ballasts and voltage-matched circuits to avoid damaging the original wiring. I've seen many DIY cases where owners faced issues like faulty lighting control modules or failed annual inspections, so professional installation is advisable to sidestep risks. As an added note, if budget is tight, LED lights are a solid alternative—more energy-efficient, longer-lasting, and simpler to install than xenon.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

What are the dimensions of the Santana in terms of length, width, and height?

As a compact sedan, the overall dimensions of the Santana are: 4475mm/1706mm/1469mm (length/width/height), with a wheelbase of 2603mm. The dimensions of the Santana hatchback version are: 4282/1706/1489mm (length/width/height), with the same wheelbase of 2603mm. Here are some details about the Santana: 1. Storage: The new Santana does not have particularly large storage spaces in each area, but the numerous compartments are sufficient for daily use. The front seat center console features dual cup holders with a secure fixing mechanism to prevent tilting. 2. Powertrain: The new Santana is equipped with EA211 series engines in 1.4L and 1.6L displacements. The 1.4L engine delivers a maximum power of 66kW, while the 1.6L engine produces 81kW. Both engines utilize a lightweight all-aluminum construction. 3. Suspension: It adopts a front MacPherson independent suspension and a rear torsion beam non-independent suspension.
17
3
Share

Where is the throttle relay located in the Tiida?

The throttle relay in the Tiida is located inside the fuse box in the engine compartment, with indications on the back. A relay is an electrical control device that causes a predetermined step change in the controlled quantity in the electrical output circuit when the change in the input quantity meets specified requirements. It establishes an interactive relationship between the control system and the controlled system. Information about relays is as follows: 1. Relays have both a control system and a controlled system, commonly used in automated control circuits, where they serve functions such as automatic regulation, safety protection, and circuit switching. 2. When the input quantity (such as voltage, current, temperature, etc.) reaches a specified value, the relay causes the controlled output circuit to conduct or disconnect. Relays can be divided into two major categories: electrical quantity (such as current, voltage, frequency, power, etc.) relays and non-electrical quantity (such as temperature, pressure, speed, etc.) relays. They offer advantages such as fast operation, stable performance, long service life, and compact size.
1
5
Share

Where to Find the Tire Date?

The DOT marking molded on the tire is followed by an 11-digit alphanumeric sequence representing the tire's identification or serial number. The last four digits of this serial number indicate the tire's production date. This date is formatted as four digits "AABB," where the first two digits "AA" represent the week of the year, and the last two digits "BB" indicate the year. Below is relevant information about tires: 1. Tire production date code format: The first two digits denote the production week, and the last two digits represent the production year. For example, 1204 means the tire was produced in the 12th week of 2004. Tires are circular elastic rubber products mounted on various vehicles or machinery, designed to roll on the ground. Typically installed on metal rims, they support the vehicle body, absorb external shocks, ensure contact with the road surface, and maintain driving performance. 2. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and extreme temperatures during operation. Therefore, they must possess high load-bearing, traction, and cushioning capabilities. Additionally, they require high wear resistance, flexibility, and low rolling resistance with minimal heat generation. Half of the world's rubber consumption is used in tire production, highlighting the significant demand for rubber in tire manufacturing.
18
1
Share

What is the ground clearance of a Ford Mustang?

The ground clearance of a Ford Mustang is 147mm. The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the ground when the car is fully loaded and stationary. It is used to express the car's ability to pass over obstacles such as rocks without collision. Information about the minimum ground clearance is as follows: 1. The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability. 2. In SUVs, the minimum ground clearance often determines the vehicle's off-road capability. At the same time, due to the different drive axle configurations of SUVs compared to sedans, the minimum ground clearance in sedans or sports cars mostly refers to the vertical distance between the lowest point of the body's lower contour line or the lowest component on the chassis and the ground, while in SUVs, it mostly refers to the vertical distance between the ground and the lowest component on the front or rear axle.
10
2
Share

What is the Difference Between Buying a Car with and without Transfer of Ownership?

The fundamental difference between transferring and not transferring vehicle ownership lies in whether the vehicle is registered under your name. Only when the ownership is transferred to you do you become the legitimate owner, and the vehicle truly belongs to you. Without transfer of ownership, the car remains someone else's property. Below is additional information on ownership transfer: 1. Used Cars: When purchasing a used car, transferring ownership is a mandatory procedure. Moreover, unless you have a trustworthy individual or agency acting on your behalf, it is essential to personally handle the transfer process to avoid any oversights in the paperwork. 2. Procedures: Ensure the purchased vehicle has no outstanding violations. Bring the vehicle's five essential documents: the vehicle license, registration certificate, insurance policy, road maintenance fee receipt, and purchase tax certificate (originals), along with the new owner's ID and a copy of the previous owner's ID. Follow the instructions provided by the processing authority. 3. Insurance: Not transferring ownership significantly impacts the process of purchasing insurance for the vehicle. According to relevant insurance laws, if the insured vehicle is sold, transferred, gifted, or its purpose is altered, the policyholder must notify the insurance company in writing in advance and apply for policy amendments. Once the insured vehicle is transferred, the original policy becomes void.
1
0
Share

What is the engine displacement of the Toyota Yaris L?

Toyota Yaris L offers 1.3L and 1.5L engine displacement options. The vehicle's dimensions are 4160mm in length, 1700mm in width, and 1495mm in height, with a wheelbase of 2550mm. In terms of exterior design, this model maintains its original design language while featuring a newly designed exclusive bumper, headlight clusters with added daytime running lights, and redesigned rear light cluster with LED illumination that reduces energy consumption. The interior retains the original scarf-holder inspired design theme, with refined center console lines that visually separate the audio control area from the climate control area, while extending lines create a more spacious cabin ambiance.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.