Can the Geely Panda handle long-distance trips?

What is the difference between 97H and 97V tires?

The differences between 97H and 97V tires are as follows: 1. Different properties: The 97H tire indicates the load index and speed rating of the tire. 97V respectively represents the load index and speed rating of the vehicle tire. 2. Different characteristics: H indicates that the tire can withstand a maximum vehicle speed of 210 km/h. V represents that the maximum speed this tire can withstand is 270 km/h. Extended information is as follows: Tire model such as: 215/70R15, the meanings of these numbers are respectively: 1. 215 indicates the tire section width: the unit is mm, generally the width of the tire is between 145—285mm, with intervals of 10mm; 2. 70 is the aspect ratio: that is, the ratio of the tire sidewall height to the tire section width, 70 represents 70%, generally the aspect ratio of the tire is between 30%—80%, under normal circumstances, ordinary cars should not use tires with an aspect ratio >75%, luxury cars and high-performance sports cars are recommended to use tires with an aspect ratio <60%; 3. R is the abbreviation of Radial: indicating that the tire is a radial structure, 15 is the outer diameter of the rim, the unit is inches.

8

5

Share

What is the penalty for driving at 60 km/h in a 30 km/h speed limit zone?

Driving at 60 km/h on a road with a 30 km/h speed limit constitutes speeding by (60-30)/30*%=100%. Exceeding the speed limit by more than 70% will result in corresponding fines, 12 demerit points, and may also lead to the revocation of the driver's license. For ordinary vehicles outside of highways, the penalties for speeding are as follows: 1. Within 10%: No penalty for exceeding the speed limit by less than 10%. 2. Below 20%: Exceeding the speed limit by more than 10% but less than 20% will result in corresponding fines and 3 demerit points. 3. Below 30%: Exceeding the speed limit by more than 20% but less than 30% will result in corresponding fines and 6 demerit points.

15

2

Share

Why does the GLC always make noise when braking?

There are generally three reasons for the GLC's braking noise: 1. Normal ABS intervention: The sound produced when the ABS system is functioning normally. 2. Insufficient friction: Noise caused by newly replaced brake pads not being properly worn in. 3. Excessive wear: Noise resulting from excessive wear between the brake discs and brake pads. Below is an introduction to related content: ABS working principle: The Mercedes-Benz GLC is equipped with an ABS anti-lock braking system. Its working principle involves a cycle of locking and releasing, keeping the vehicle in a critical state. In this situation, sudden braking will trigger the ABS to intervene, producing abnormal noise, which is considered normal.

6

5

Share

How to Use Urea Solution in Vehicles?

Vehicles use urea primarily to reduce harmful nitrogen oxides in exhaust gases into nitrogen and water. It is generally used in diesel vehicles. There is a dedicated urea tank in the vehicle, where the urea solution is filled. As long as the vehicle is running, urea will be consumed, so it needs to be replenished in time. Typically, about 4 liters of urea is consumed per 100 liters of diesel. The exact amount depends on factors such as engine displacement, model, manufacturer, etc. Different road conditions and load weights can also affect urea consumption. Below is relevant information: 1. Introduction to vehicle urea: The scientific name of vehicle urea is Diesel Exhaust Fluid (DEF). It is commonly used in diesel engines as part of the SCR (Selective Catalytic Reduction) technology to reduce nitrogen oxide pollution in diesel vehicle exhaust. Its composition is 32.5% high-purity urea and 67.5% deionized water. 2. Reason for adding urea in diesel engines: Since diesel engines emit polluting nitrogen oxide gases during operation, which are harmful to the atmosphere and human health, prolonged exposure to such gases can cause respiratory diseases. To mitigate the damage to the atmosphere and humans, when urea encounters nitrogen oxides emitted by diesel engines, a chemical reaction occurs, converting the nitrogen oxides into nitrogen and water for emission.

15

0

Share

What are the essential tools to have in a car for annual inspection?

There are several essential tools that must be in a car for annual inspection: 1. Warning triangle: If the car is not equipped with a warning triangle, failing to set up a warning sign behind the car after a breakdown or accident will result in penalty points, and it is extremely dangerous as it can easily lead to secondary accidents. 2. Fire extinguisher: If medium-sized and above passenger vehicles or hazardous goods transport vehicles are not equipped with fire extinguishers, the traffic management department will penalize the driver according to regulations. Without a fire extinguisher, the car will not pass the annual inspection. For safety reasons, family cars should also be equipped with fire extinguishers. 3. Jack: When driving, it's inevitable to encounter a flat tire. A jack is needed when changing tires. The jack should be placed on the inner side of the car's side skirt, approximately 20 cm behind the front wheel and 20 cm in front of the rear wheel. Without a jack, it will be very difficult to change a spare tire.

8

3

Share

What brand does Yin Gang motorcycle belong to?

Yin Gang motorcycle is a second-tier brand from Chongqing. The specific details are as follows: 1. Appearance: The overall design is relatively compact, and the configuration is decent, featuring front inverted shock absorbers and front and rear disc brakes, which are standard configurations for adventure bikes. 2. Performance introduction: This engine has an actual displacement of 250ml, with a maximum power of 13KW and a maximum torque of 17.3N.m. From the parameters, there are not many highlights, but the oil-cooled radiator can be considered a technical highlight. 3. The crankshaft of the motorcycle engine is of a combined type, consisting of a left half crankshaft, a right half crankshaft, and a crank pin pressed together. Ball bearings are installed on the main journal of the left and right half shafts to support the crankshaft in the crankcase.

13

4

Share

Can the Geely Panda handle long-distance trips?

What is the difference between 97H and 97V tires?

What is the penalty for driving at 60 km/h in a 30 km/h speed limit zone?

Why does the GLC always make noise when braking?

How to Use Urea Solution in Vehicles?

What are the essential tools to have in a car for annual inspection?

What brand does Yin Gang motorcycle belong to?

Is the Demand for Copper High in New Energy Vehicles?

What is the Vehicle and Vessel Tax in Insurance?

Why is the recirculation light not on?

Regulations on Annual Inspection Time for 7-Seater Vehicles