···
Log in / Register

Can the Geely Emgrand close windows by long-pressing the lock button?

4 Answers
RebeccaAnn
07/29/25 12:07pm

Geely Emgrand cannot close windows by long-pressing the lock button. Detailed introduction: Cars equipped with one-touch window controls have two levels of window control switches. The first button position is the same as that of ordinary electric windows, while the second position allows the window to fully open or close automatically with just a press and release. Precautions: Electric windows may sometimes operate unevenly, possibly due to a lack of oil in the lift mechanism. In such cases, the inner cover should be removed to add oil. If the window moves unevenly or does not move at all, it may be due to a switch or motor failure, requiring replacement of the switch or motor. If the electronic device does not operate, carefully check which fuse controls the electric windows and replace the fuse accordingly.

Was this review help?
1
1
Share
StMakayla
08/13/25 10:09pm

I often use this feature in my Geely Emgrand. Holding down the lock button can indeed close all windows with one touch, which is super convenient—for example, when you forget to close the windows after parking, just press and hold the lock button for 2-3 seconds, and the windows will automatically roll up. If your car is a higher trim or a newer version, it likely comes with this feature by default. Try testing it: unlock the car, lower the windows, then stand about 5 meters away and hold the lock button to observe the effect. If it doesn’t work, you may need to check the vehicle manual or visit a 4S store to activate hidden settings. With recent smart car system upgrades, this feature has become more widespread, helping reduce the risk of theft. From my daily driving experience, it’s truly practical—I highly recommend making the most of such hassle-free features.

Was this review help?
11
2
Share
Expand All
VonWyatt
10/08/25 8:34am

As someone who frequently deals with cars, I can confirm that certain Geely Emgrand models support window roll-up by long-pressing the lock button, a feature dependent on the vehicle's control module presets. The operation is simple—just hold the button for a few seconds to trigger it. If your Emgrand is an older or base model, you might need to connect an OBD tool to program and activate it; modern versions post-2020 typically come fully equipped. Adding an aftermarket module is also a safe and affordable option, costing around a hundred yuan, effectively preventing the issue of forgetting to close windows. From a safety perspective, this feature protects items inside the car, and I recommend regularly testing the system's stability to ensure reliable operation.

Was this review help?
2
4
Share
Expand All
FelicityMarie
11/22/25 3:06am

I believe the Geely Emgrand can achieve this. The long-press lock button to automatically raise windows is a common design. The operation is straightforward: just hold it down for a few seconds. Nowadays, new cars like the fourth-generation Emgrand generally support this feature, eliminating the hassle of manual operation. Check your specific model's configuration documentation; if it doesn't support it, you can easily install a compatible device. I personally use it frequently for anti-theft purposes, and it's highly convenient.

Was this review help?
20
1
Share
Expand All
More Forum Discussions

How early can a B2 driver's license annual review be conducted?

Annual reviews cannot be conducted in advance. Below is relevant information about annual reviews: 1. Concept: Also known as motor vehicle inspection. The inspection items and scope vary depending on the usage nature of the motor vehicle. 2. Time: For small cars and blue-license minivans, within the first six years after new vehicle registration, an inspection is required every two years; after six years, it becomes an annual inspection; after ten years, it's an annual inspection, and after fifteen years, it's twice a year. For trucks, after registration, an annual inspection is required; after ten years, it's twice a year. The documents required for vehicle annual inspection include: the vehicle's driving license, valid compulsory insurance policy, and vehicle and vessel usage tax.
3
5
Share

What are the four basic types of car insurance?

Vehicle insurance four basic types refer to vehicle damage insurance, third-party liability insurance, no-deductible insurance, and passenger insurance. The following is a detailed introduction: 1. Vehicle damage insurance: Vehicle damage insurance means that if the vehicle owner causes total or partial loss of the vehicle due to an accident during driving, the insurer shall compensate according to the insurance contract. 2. Third-party liability insurance: Third-party liability insurance refers to the economic liability that the insured or their permitted driver should bear according to the law when an accident occurs during the use of the insured vehicle, causing personal injury or death or direct property damage to a third party, and the insurance company is responsible for compensation. 3. No-deductible insurance: If an accident within the scope of insurance liability occurs, resulting in vehicle loss or third-party liability compensation, the insurer shall be responsible for compensation according to the amount stipulated in the "Terms" for compensation. 4. Passenger insurance: Refers to during the insurance period, the insured and their permitted legal driver, in the process of using the insured vehicle, if an accident occurs causing personal injury or death to the personnel on the insured vehicle, the economic compensation liability that should be borne by the insured according to the law.
16
5
Share

What is the maximum wading depth of the Haval H9?

The maximum wading depth of the Haval H9 is 700mm. The wading depth of the Haval H9 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Haval H9 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow it at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, do not proceed and choose an alternative route instead.
16
0
Share

Should the Buick GL6 Use 92 or 95 Octane Gasoline?

According to the official vehicle manual recommendation, the Buick GL6 should use 92 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, you can also find it on the fuel tank cap, which will also indicate the recommended octane. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the gasoline grade. High-compression engines can also be tuned to use lower-octane gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Buick GL6 occasionally uses the wrong gasoline grade, simply switch back to the correct octane after the tank is empty. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles recommended for low-octane gasoline, using a higher octane will not cause damage, but the increased octane value may alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended for high-octane gasoline, using a lower octane can cause engine knocking. The significantly lower octane value reduces the fuel's ignition point, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires, resistance occurs during the upward stroke. This resistance makes the engine run very unevenly. Mild knocking may only increase noise without significant engine damage, but noticeable knocking indicates severe engine conditions. The vibrations not only affect driving stability but can also cause abnormal wear on the pistons and cylinders, potentially leading to cylinder scoring in severe cases.
20
4
Share

How Many Kilometers Can the First Maintenance Be Exceeded?

First maintenance can be exceeded by 500 kilometers. The following is an introduction to the first maintenance: 1. Concept: The first maintenance of a car refers to the initial maintenance, generally at 5000 kilometers/6 months. 2. Notes: The engine has a break-in period with a new car. Different brands and models of cars are equipped with different engines, some of which use special technology and have strict requirements for engine oil. Some engines have special materials and high precision, resulting in relatively less wear. In addition to changing the engine oil and oil filter, the first maintenance also includes a comprehensive inspection and diagnosis of the vehicle's condition and usage. Usually, the first maintenance is free of charge.
4
1
Share

What is the difference between FAW Haima and Haima?

FAW Haima and Haima differ in that Haima is a Chinese automobile manufacturer, while FAW Haima is a Japanese automobile manufacturer. Here are the relevant introductions: 1. Haima Automobile: The logo of Haima Automobile features an abstract falcon shape embedded in a circle symbolizing the sun, representing "the rising sun and the soaring roc," which embodies the corporate image of Haima Automobile's upward striving and determined ambition to soar. 2. FAW Haima: FAW Haima Automobile Co., Ltd. is located in Jinpan Industrial Development Zone, Haikou City, covering an area of 1 million square meters. After more than ten years of construction, Haima Automobile has established excellent asset structures and advanced management systems, built leading domestic production lines for automobile stamping, welding, painting, and assembly processes, and established shared development and supporting platforms and marketing networks with strategic partners. It is a large-scale passenger car production enterprise designated by the state.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.