Can the gap between the bumper and fender be adjusted?

1 Answers
MacJohnny
07/25/25 6:55am
The gap between the bumper and fender cannot be adjusted. Introduction to car bumpers: The vehicle's bumper is a safety device located at the front and rear of the vehicle. Early bumpers were made of steel plates, while later versions use engineering plastics, making them one of the vehicle's safety devices. The production of vehicle bumpers must comply with the automotive protective bumper industry standards and requires inspection before being put into production and use. Function of car bumpers: The front and rear bumpers of a vehicle are vulnerable accessories that serve decorative purposes, effectively absorbing external impacts while protecting the entire vehicle and its occupants. Replacing the bumper will not have any impact on the vehicle.
Was this review help?
12
4
Share
More Forum Discussions

What is the situation when the rear charging port of Jetour X90 has no power?

There are two situations when the rear charging port of Jetour X90 has no power: connecting the phone through the USB port, but the phone shows no charging display; connecting the phone through the USB port, the phone shows a charging display, but it just doesn't charge. No charging display on the phone: The vehicle USB port fuse is blown (find the corresponding fuse through the vehicle manual, and replace the spare fuse in time if there is a blown phenomenon). The phone charging port spring is loose, causing poor contact. The phone shows a charging display, but it doesn't charge: If this happens, it means that the USB port is only for reading U disk data, not for charging the phone. You can check the application range of the USB port through the vehicle manual.
8
2
Share

Does the Chery 484 engine VVT pulley need timing alignment?

Chery 484 engine VVT pulley requires timing alignment. Issues with the VVT timing pulley may cause timing belt skipping, leading to symptoms such as unstable idle speed and poor acceleration in the engine. Nature of VVT: The technology employed in VVT engines, namely Continuous Variable Valve Timing technology, can continuously adjust the engine's valve opening/closing timing and air intake volume, thereby improving engine power, optimizing torque curves, and reducing fuel consumption. Working principle of VVT: The working principle of VVT is that the crankshaft drives the camshaft through timing belts, gears, or chains. The profile and position of camshaft lobes are typically optimized for specific engine speeds, which usually reduces torque at low RPM and power at high RPM. VVT technology enables adjustments based on engine operating conditions, enhancing engine efficiency and power output.
18
4
Share

Where is the OK button on the Besturn B70?

The OK button on the Besturn B70 is located on the control panel. This button is used to operate the trip computer. Press lightly to confirm (OK), press and hold to reset (RESET). Function of the trip computer: The trip computer is a high-tech electronic product that uses advanced technology. It is used to read vehicle data. This system continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed standards. If the vehicle's emissions exceed standards, it will immediately issue a warning. Function of OK/RESET: OK/RESET is a multifunctional button. It serves as a confirmation button when adjusting the clock; when in the short-distance mileage/total mileage function, it is used to toggle display/reset.
17
2
Share

What are the functions of the central control DISP button?

The function of the central control DISP button in a car is: it can adjust vehicle information such as mileage, fuel consumption records, remaining fuel quantity, remaining range, etc. It can display information like fuel consumption and mileage, and a long press can reset these values. More details about the central control DISP are as follows: 1. DISP refers to screen display: The disp button in a car is usually located on the steering wheel and stands for screen display. It is used to change the content displayed by the trip computer, such as fuel consumption, remaining range, etc. 2. Specific functions: It can display instantaneous fuel consumption, average fuel consumption, etc. The lever above is the steering gear indicator light, which will illuminate when the key is turned on without starting the engine. If it remains lit after starting the engine, it indicates a problem with the steering gear system, such as difficulty in turning the steering wheel.
11
2
Share

What does the SRS display on the Mercedes R350 dashboard mean?

The SRS on the Mercedes dashboard is an abbreviation for the vehicle's service reminder light in English. Since 'service' is too long to display on the dashboard, it is replaced with SRS, which serves as a warning light to remind the driver of regular maintenance. If the maintenance has already been performed, this reminder can be reset directly. Mercedes maintenance intervals: The maintenance cycle for Mercedes is one year or 10,000 kilometers for an oil change. For new cars, the first oil change is recommended at six months or 8,000 kilometers, and the brake fluid should be replaced every two years. How to reset the Mercedes maintenance light: First, start the vehicle, then press the button on the left side of the dashboard twice and turn off the engine. Keep holding the button, then start the vehicle again. Wait a few seconds until you hear a beep, then release the button.
14
4
Share

What's the reason for BMW X4's non-responsive reverse radar and central control?

It is highly likely due to poor line contact. It is necessary to promptly check the wiring and the connection points of the entire vehicle's installation to see if there are any loose connections. The following are other possible causes: Aging of the video power cable: You can try replacing it with a new power cable. If the issue is resolved, it indeed indicates a problem with the video power cable. Prolonged use of the car camera: Extended use of the car camera can lead to poor chip photosensitivity, resulting not only in a snowy screen but also potential black screen issues. Such chip abnormalities and design defects are beyond the owner's ability to resolve and require inspection, repair, or direct replacement at a repair shop.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.