Can the front of the car touch the line in an S-curve?

2 Answers
DeGenevieve
07/25/25 12:03am
In the S-curve of Subject 2 driving test, the front of the car is allowed to touch the line, as is the case with right-angle turns and S-curve driving, as long as the wheels do not cross the road edge line. Below are specific techniques for Subject 2 of the driving test: Slow speed: Maintaining a slow speed is the fundamental rule for practicing Subject 2. Ensure the vehicle does not stop while keeping the speed as slow as possible—the slower, the better. A slow speed allows sufficient time to adjust each operation. Adjust the mirrors: After getting into the car, always adjust the rearview mirrors properly, which is particularly important for reverse parking and parallel parking. Master the three-point alignment method: The three points are the driver's eyes, a reference point on the car, and a reference point on the ground. During Subject 2 operations, it is essential to accurately identify and observe these points to ensure precise positioning. Pay attention to the four corners of the car: The front corner tends to touch the outer line during reverse parking, while the rear corner tends to touch the side lines of the parking space. The front corner may cross the line during curve driving or right-angle turns. In parallel parking, the front corner may touch the outer line or the left front corner of the parking space, while the right rear corner may touch the right parking space line. Therefore, always be mindful of the four corners and the outer edge lines.
Was this review help?
18
1
Share
WestonMarie
08/10/25 3:37pm
On S-curves, the front of the car must absolutely not cross the line. Having driven for over twenty years, I clearly understand that if the car's front touches the line while turning, it can easily scrape roadside obstacles or affect oncoming vehicles, leading to accidents. S-curves are designed to test turning skills—if the front crosses the line, it indicates insufficient steering control. Drivers should pass through slowly and at a steady speed, focusing their gaze on a point ahead in the curve rather than the car's front. Especially in rain or snow, when tires may slip, the risk of crossing the line increases. Beginners often make mistakes by turning the steering wheel too hastily. It's advisable to practice in an open area to familiarize themselves with the car's width and turning radius. Safe driving always comes first—don't gamble with your own or others' lives. If the line is crossed, stop and check the car's condition as soon as possible.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

Why Are There Water Droplets at the Car Air Conditioning Vents?

The reasons for water droplets at the car air conditioning vents are as follows: 1. The air conditioning is set too low: When the air conditioning is set too low, moisture in the air condenses on the outside of the vents, creating a phenomenon resembling white smoke. Moisture in the air can also condense on the plastic casing of the evaporator or the outer surface of the plastic ducts delivering cold air, leading to dripping. 2. Evaporator: Models with poor insulation on the plastic casing of the evaporator or the plastic ducts delivering cold air are more prone to this issue. 3. Poor vehicle airtightness: High-humidity outside air continuously seeps into the car interior. Another typical symptom of excessively high humidity inside the car is the condensation of water droplets around the vents.
18
3
Share

What to Do When the Keyless Start Car Key is Locked Inside the Car?

Solutions for a car key locked inside include using a hook to open the door, breaking the glass, or seeking professional locksmith services. Below are precautions for using car keys: Do not keep the spare key inside the car: Unlike traditional mechanical keys, smart keys involve the vehicle's anti-theft technology. Simply duplicating a lost smart key is not feasible for continued use. It's understood that each manufacturer has strict procedures for keyless entry and key duplication in their after-sales service departments. Therefore, car owners are advised to protect their spare keys properly—avoid storing them with the primary key or inside the vehicle. Avoid placing the key near electronic devices: Smart keys operate using low-intensity radio waves, which can malfunction under magnetic interference. Frequently placing the smart key near a mobile phone may lead to temporary failure of the remote function, as the chip inside the key can be disrupted by the phone's frequency. Additionally, exposure to high-intensity radio waves can excessively drain the key's battery.
19
2
Share

What is the spindle of a lathe?

The spindle of a lathe is the shaft that clamps the workpiece and drives it to rotate, or directly clamps the tool and drives it to rotate. Relevant information is as follows: 1. Introduction: The machine tool spindle refers to the shaft that drives the workpiece or tool to rotate in the machine tool. It is usually composed of a spindle, bearings, and transmission components (gears or pulleys) to form the spindle assembly. In the machine, it is mainly used to support transmission parts such as gears and pulleys, and to transmit motion and torque, such as the machine tool spindle. Some are used to clamp workpieces, such as mandrels. Except for machine tools whose main motion is linear motion, such as planers and broaching machines, most machine tools have spindle assemblies. 2. Determining factors: The motion accuracy and structural stiffness of the spindle assembly are important factors that determine the machining quality and cutting efficiency. The main indicators to measure the performance of the spindle assembly are rotational accuracy, stiffness, and speed adaptability.
10
0
Share

Why is Rolls-Royce called Cullinan?

The following is the origin of the name of the Rolls-Royce Cullinan: Rolls-Royce named this SUV "Cullinan," which is derived from the world's largest diamond rough, the Cullinan (also known as the Star of Africa). Here is some related information about the Rolls-Royce Cullinan: 1. The seat design showcases the quality and craftsmanship of Rolls-Royce vehicles, featuring a simple yet modern horseshoe pattern that emphasizes the seat's support. The entire backrest is meticulously shaped from a single piece of leather, creating a highly three-dimensional surface. 2. The side line, starting from the position of the headlight assembly, extends all the way to the D-pillar, giving the car a solemn and majestic appearance. The vehicle measures over 5.3 meters in length and 1.83 meters in height.
1
1
Share

Can a car be driven if the exhaust pipe is submerged in water when parked on the roadside?

Can a car be driven if the exhaust pipe is submerged in water when parked on the roadside? The answer is yes. Here are the relevant details: 1. Chassis: If the water level just reaches the chassis, it is safe as long as the car is not submerged for an extended period. Regarding the wading depth of a car, it is generally considered safe if the water level is up to half the height of the wheel. This standard, proposed by some experts, serves as a reference. 2. Exhaust pipe: The exhaust pipe is positioned higher vertically compared to other components of the exhaust system. The real concern for a car is water entering the engine, but the likelihood of water entering the engine through the exhaust pipe is minimal. Instead, it is more important to check whether the engine air intake at the front of the vehicle has been submerged.
10
1
Share

Why can't a person lie down in a car with a width of 1.8 meters?

The reason why a person cannot lie down in a car with a width of 1.8 meters is that the actual interior width is less than 1.8 meters. Here are the relevant explanations: 1. Definition of car width: Car width is the distance between two planes parallel to the vehicle's longitudinal symmetry plane and respectively touching the fixed protruding parts on both sides of the vehicle. Simply put, it is the distance between the two extreme points in the width direction of the car. 2. Advantages of a wider body: The benefit of a wider car body is that passengers sitting in the back row will not feel crowded, greatly improving riding comfort. However, excessive width will reduce the convenience of driving and parking in urban areas. The generally recognized upper limit for the width of a sedan is 2 meters.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.