Can the exhaust pipe be cleaned by pouring water into it?

1 Answers
VanAdriana
07/30/25 9:50am
The exhaust pipe should not be cleaned by pouring water into it. While it is acceptable to clean the exterior of the exhaust pipe, pouring water inside is not recommended. If water remains in the exhaust pipe, it may be sucked back into the engine during startup, causing significant damage. If carbon deposits form in the exhaust pipe, it is advisable to use specialized cleaning agents for removal. Different materials of exhaust pipes may require different cleaning methods. Carbon deposits in the exhaust pipe result from incomplete combustion of fuel in the engine, leading to a layer of black carbon buildup that is difficult to clean. Specialized chemical cleaners can be sprayed onto the deposits, left for some time, and then wiped off with a cloth to remove some of the carbon. However, deposits inside the pipe are not easily cleaned.
Was this review help?
6
1
Share
More Forum Discussions

How Often Should a New Car Battery Be Replaced?

New car batteries should be replaced every 2-3 years. The battery replacement method is as follows: 1. Locate the positive and negative terminal nuts: Open the two fastening buttons on the insulation cover to reveal the red and black insulation caps on the positive and negative terminals. Lift the insulation caps to expose the locking nuts. 2. Use a wrench or hex socket to loosen the negative terminal's fastening nut, then gently pry open the fastening block with a flathead screwdriver before pulling out the negative terminal. 3. Use a wrench or hex socket to loosen the positive terminal's fastening nut, then gently pry open the fastening block with a flathead screwdriver before pulling out the positive terminal. 4. Loosen the nut securing the battery's locking strap, release the strap, and then remove the battery.
2
4
Share

What is the range of the Tesla Model 3 Standard version?

Tesla Model 3 Standard version has a range of 595 kilometers. The Tesla Model 3 is a mid-size car with a pure electric engine, featuring a maximum motor horsepower of 275ps, a total motor power of 202kw, and a total motor torque of 404nm. Below are the details of the Model 3: 1. The Tesla Model 3 has dimensions of 4694mm in length, 1850mm in width, and 1443mm in height, with a wheelbase of 2875mm, and a body structure of a 4-door, 5-seater sedan. 2. The Tesla Model 3 is equipped with a single-speed electric vehicle transmission, a top speed of 225 kilometers per hour, and a rear-wheel drive configuration.
15
5
Share

How many cylinders does the BMW X1 engine have?

BMW X1 uses two types of engines in total, one is a 3-cylinder engine, and the other is a 4-cylinder engine. Here is some relevant information about the BMW X1: 1. The BMW X1 is a compact SUV under the BMW brand, with a length, width, and height of 4565 millimeters, 1821 millimeters, and 1620 millimeters respectively, and a wheelbase of 2780 millimeters. 2. The 3-cylinder engine of the BMW X1 is a 1.5-liter turbocharged engine, with a maximum power of 103kw and a maximum torque of 220 Nm. 3. The 4-cylinder engine of the BMW X1 is a 2.0-liter turbocharged engine, with a maximum power of 141kw and a maximum torque speed of 280 Nm.
12
0
Share

How to replace the battery of Soueast DX7 car key?

Soueast DX7 car key battery replacement method: 1. Remove the central mechanical key. First press the mechanical key button with your hand, then directly pull out the mechanical key. 2. Remove the silver chrome strips on both sides. Gently pry them outward with your fingers to remove. 3. Separate the key shell by splitting it from the gaps on both sides. 4. After opening, take out the button battery. 5. Install the new button battery, paying attention not to reverse the positive and negative poles. 6. Snap the plastic shell back together and align the holes, then press firmly to secure. 7. Reinstall the silver chrome strips on both sides to complete the battery replacement.
2
4
Share

How many cylinders does the BMW 320li engine have?

BMW 320li is equipped with a four-cylinder engine. Here is more information about the BMW 320li: 1. The engine used is a four-cylinder turbocharged engine, with a maximum power of 135kw and a maximum torque of 300Nm, paired with an 8-speed automatic transmission, and adopts rear-wheel drive across the entire lineup. 2. The BMW 320li is a mid-size car under the BMW brand, featuring a 4-door, 5-seat sedan body structure. Its front suspension is a double-joint spring strut front axle, and the rear suspension is a multi-link independent suspension. The car's dimensions are 4753mm in length, 1811mm in width, and 1455mm in height, with a wheelbase of 2920mm.
8
1
Share

How to Open the Wrangler's Hood?

In the Wrangler's cabin, on the left side near the bottom, there is a handle to pull. Then, press a small lever under the hood to open it. For most vehicles, the hood release is located inside the car, typically slightly to the left under the steering wheel. Placing the switch inside the car has the advantage of preventing unauthorized opening from the outside. Below is some relevant information about the hood: 1. The main requirements for a hood are heat and sound insulation, lightweight, and rigidity. 2. When opened, the hood usually flips backward, though a small number flip forward. A backward-flipping hood should open to a predetermined angle without touching the windshield, maintaining a minimum gap of about 10 millimeters.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.