···
Log in / Register

Can the Engine Start After a Cylinder Blowout?

4 Answers
LukasLynn
08/30/25 2:24am

After a cylinder blowout, the car cannot continue to drive. Here is some information about engine cylinder blowouts: 1. A cylinder blowout will severely damage the engine, often rendering it almost completely unusable. In the event of a cylinder blowout, after performing emergency measures, professional assistance should be sought for repair or engine replacement. 2. A cylinder blowout occurs when the engine's tachometer enters the red zone, causing the pistons to expand and get stuck in the cylinders due to excessive heat, leading to engine failure. In severe cases, the excessive pressure and immovable pistons can cause the vehicle's wheels to lock up and may even result in flames being ejected.

Was this review help?
19
0
Share
NevaehFitz
09/11/25 6:33am

As an experienced driver, I've personally experienced an engine seizure. It happened on the highway when the car suddenly lost power and the engine made a huge banging noise. Starting after seizure? Absolutely not! I tried to restart it, but there was no response at all. This is because an engine seizure means the piston is stuck in the cylinder or the connecting rod is broken and blocking the engine internals. Forcing a start would only scratch more components, increasing repair costs by tens of thousands. The cause might be insufficient oil or prolonged engine overheating. My advice is to stop immediately for inspection and have it towed to a professional shop for disassembly and examination - safety first. For prevention, change oil regularly, monitor the water temperature gauge, and avoid prolonged high-temperature operation of the vehicle. It was a profound lesson, and now I'm extremely careful about car maintenance.

Was this review help?
9
0
Share
Expand All
DeConnor
10/25/25 7:25am

Last time my friend's car had an engine seizure. He described that after the car stalled, it wouldn't start no matter what, as if the engine was locked. I helped him analyze that an engine seizure is an internal engine disaster, such as a piston shattering and getting stuck in the cylinder block, causing the entire system to fail. Attempting to start it is purely a waste of battery power and might even damage the starter motor. Engine seizures are common in old cars or those with improper maintenance, such as aged lubricating oil or lack of pressure. If encountered, don't force it; directly contact towing services and let the mechanic use specialized tools to check the extent of the damage. The repair cost is high, but safe driving is the most important. Remember to do a thorough engine compartment inspection every year.

Was this review help?
14
4
Share
Expand All
LePaul
12/08/25 7:48am

I believe it's absolutely impossible to successfully start an engine after a blown cylinder. The reason is simple: a blown cylinder indicates severe damage to core components such as pistons or connecting rods, leading to internal mechanical blockage. Forcing a start could scrape the cylinder walls or cause additional failures, posing high risks. For prevention, pay attention to oil condition and temperature control, as blown cylinders often result from lubrication failure or overheating. Recommended action: Do not attempt to start the engine after stopping; wait for professional rescue and disassembly assessment.

Was this review help?
6
3
Share
Expand All
More Forum Discussions

Why Does a Diesel Engine Shake at Idle?

Here are the reasons why a diesel engine shakes at idle: 1. Stuck fuel injector: A stuck or poorly atomizing injector in one cylinder causes that cylinder to not work or work poorly (blue-white smoke may be emitted from the exhaust). This can be checked using the cylinder cut-off method. 2. Uneven fuel supply from the injection pump: Uneven idle fuel supply from the injection pump leads to inconsistent cylinder operation at idle. 3. Low RPM: Improper idle adjustment (too low RPM) can be resolved by adjusting the idle fuel supply screw. 4. Improper valve clearance: Incorrect valve clearance (due to loose adjustment screws, abnormal wear, or abnormal wear of the valve pushrod) causes the cylinder to not work or work poorly. This can be fixed by adjusting the valve clearance. 5. Poor valve sealing, leading to suboptimal operation. 6. Engine overheating or insufficient oil (causing poor lubrication), making it difficult for engine components to operate smoothly.
18
2
Share

Which switch is used for windshield defogging?

Windshield defogging is activated by pressing the defogger switch. Other methods for windshield defogging include: 1. Wiping it clean with a towel. 2. Turning on the car's heater to clear the fog. 3. Leaving a slight gap in the window to remove fog. 4. Using an automotive glass anti-fog spray. Here is some related information: 1. Reasons for windshield fogging are as follows: (1) Temperature difference between the inside and outside of the car. (2) The window temperature is lower than the outdoor temperature. (3) Temperature difference between the two sides of the window. 2. Methods for maintaining the glass include: (1) Using appropriate windshield washer fluid according to the season. (2) Applying automotive glass heat insulation film. 3. Functions of the glass include: blocking wind and rain, noise reduction and sound insulation, reducing wind resistance and guiding airflow, and protecting the safety of passengers.
4
4
Share

Does a manual transmission need gearbox oil change?

New cars do not require it. If the driving time exceeds two years or the mileage exceeds 60,000 kilometers, the gearbox oil should be changed regularly. Expired or deteriorated gearbox oil can cause difficulty in shifting gears and wear on the transmission bearings. Below is relevant information about gearbox oil: 1. The main function of gearbox oil is to keep the shifting system clean and to lubricate and prolong the life of the transmission components. Due to differences in transmission design, gearboxes are divided into manual transmissions and automatic transmissions (further categorized into CVT, AMT, etc.). Each transmission design has different technical requirements. Even the same model of transmission configured in different vehicle models will have variations in torque, weight, speed, and structure. Therefore, the original manufacturer specifies its own dedicated gearbox oil. 2. Generally, an automatic transmission in a car requires an automatic transmission oil change every two years or every 40,000 kilometers. This varies depending on the vehicle model. For Japanese models, it is recommended to change the oil every 40,000 to 80,000 kilometers. Vehicles that frequently drive at high speeds are advised to change the oil approximately every 40,000 kilometers.
11
5
Share

What does lightly pressing the brake pedal mean?

Lightly pressing the brake pedal means: pressing the brake pedal once, then releasing it, and pressing it again, repeating this process. This method is suitable for situations with low road friction coefficient, wading, or tire blowouts, where intermittent pressing of the brake pedal can help reduce speed. Below is an introduction to lightly pressing the brake pedal: 1. Applicable situations: (1) When temporary, slight deceleration is needed at high speeds; (2) When cornering; (3) When following a vehicle ahead and feeling the distance is getting too close, lightly pressing the brake pedal is necessary. 2. Brake pedal operations in vehicles can be divided into: slow braking (i.e., anticipatory braking), emergency braking, combined braking, and intermittent braking. Generally, during slow braking and emergency braking, before the wheels lock up or the vehicle stops, the clutch pedal should be fully pressed to prevent the engine from stalling and to facilitate speed adjustment. 3. Generally, pressing the brake pedal can be done in two steps, avoiding a single hard press: first, press the brake pedal with a force determined by the need—quick and forceful when the speed is high, gentle and steady when the speed is low; then, adjust the pressure based on various conditions. Pressing the brake pedal at high speeds can easily cause skidding. When the vehicle skids, the pressure on the brake pedal should be appropriately reduced to prevent the vehicle from veering off course and losing steering control.
8
0
Share

What does 2.0xl mean?

In car models, XL indicates that the vehicle belongs to the luxury version. Other code knowledge extensions are as follows: 1. XE refers to the comfort version sedan. 2. XL refers to the luxury version sedan. 3. XV refers to the super luxury version vehicle. 4. XVNAVI is XV-NAVI, which refers to the super luxury version vehicle with a navigation system. Knowledge extension about the letter T is as follows: 1. T stands for turbocharging, indicating that the vehicle is equipped with a turbocharged engine. 2. A turbocharger is essentially an air compressor that increases air intake by compressing air. 3. It utilizes the inertial impulse of exhaust gases from the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller compresses the air delivered through the air filter pipeline, pressurizing it into the cylinders. 4. As the engine speed increases, the exhaust gas discharge speed and turbine speed also increase synchronously, allowing the impeller to compress more air into the cylinders. The increased air pressure and density enable the combustion of more fuel, and correspondingly increasing the fuel quantity can enhance the engine's output power.
19
4
Share

What is the function of an intercooler?

The function of an automotive intercooler is to reduce the intake air temperature of the engine. The intercooler is essentially a supporting component for turbocharging, and its role is to improve the engine's air exchange efficiency. Specific details are as follows: 1. The exhaust gas emitted by the engine is at a very high temperature, and the heat conduction through the turbocharger increases the intake air temperature. During the compression process, the air density increases, but this also causes the temperature of the air discharged by the turbocharger to rise with the increase in pressure, leading to a decrease in oxygen density, which affects the engine's effective charging efficiency. 2. If the turbocharged air enters the combustion chamber without cooling, it not only affects the engine's charging efficiency but also easily leads to excessively high combustion temperatures, causing issues such as knocking. Additionally, it increases the NOx content in the engine's exhaust, contributing to air pollution. 3. Reduces the engine's fuel consumption. 4. Enhances adaptability to high altitudes. In high-altitude areas, using an intercooler allows for a higher pressure ratio compressor, which enables the engine to generate more power and improves the vehicle's adaptability. 5. Improves turbocharger matching and adaptability.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.