Can the Electronic Version of the Vehicle License Be Used?

What is the size of the spare tire for the old Buick Regal?

The spare tire model is T125/80R18, which is a non-full-size spare tire. The vehicle tire models are 205/65R16, 225/55R17, and 245/45R18, with different configurations of the vehicle adopting different tire models. The vehicle model year is 2019, and the entire lineup is equipped with a tire pressure display function, greatly enhancing safety. Below are additional notes on spare tire usage: 1. Regularly inspect the spare tire: Spare tire inspection mainly involves checking tire pressure and for any wear or cracks. Replace the tire as soon as possible once the tread wears down to the wear indicator line. If there are small cracks on the tire sidewall, avoid using it for long-distance or high-speed driving, as the sidewall is thinner and prone to blowouts at high speeds. 2. Do not store oil products with the spare tire: The main component of tires is rubber, which is most vulnerable to erosion by various oil products. If the tire comes into contact with oil stains, promptly wash them off with a neutral detergent. 3. Spare tire lifespan is about 4 years: Since tires are rubber products, prolonged storage can lead to aging. Generally, the aging period for tires is about 4 years, so the spare tire should be replaced after 4 years.

8

5

Share

What Causes Gear Grinding Noise When Shifting to Third Gear in a Manual Transmission Car?

The reason for gear grinding noise when shifting to third gear in a manual transmission car is either incomplete gear engagement or wear on the third gear of the transmission. Manual transmissions typically produce slight sounds during gear shifts, but if the noise is excessive, it is recommended to have it inspected at a repair facility. Car Gear Shifting Techniques: Downshift After Deceleration: Increase speed before upshifting, and reduce speed by easing off the throttle before downshifting. Always fully depress the clutch pedal before shifting, and operate the gear lever with light, quick, gentle, and precise movements. Master the Timing of Gear Shifts: Shift when the engine reaches around 2000 RPM. Press the throttle first, then the clutch to prevent forced disengagement, followed by the gear shift. Downshift based on vehicle speed; generally, downshift when the engine RPM drops below around 1500. Ensure Smooth Gear Shifting Actions: Depress the clutch fully in one motion and engage gears decisively. Familiarize yourself with the gear positions. If unable to engage a gear, shift to neutral, release the clutch briefly, then depress it again to attempt the shift. Manual Transmission Maintenance: After driving a certain mileage or on long trips, always check the transmission for any oil leaks or seepage. Address any issues promptly with cleaning and repairs. Regularly change the transmission lubricant, typically every 100,000 kilometers.

1

4

Share

What is the reason for a car's headlights having high beam but no low beam?

The reason for a car's headlights having high beam but no low beam is a damaged bulb. Most bulbs have a certain lifespan, and when they are close to the end of their service life, the light intensity fails to meet standards, and they overheat until the filament burns out. Method for replacing car headlights: Open the car's engine hood. The connection between the headlight base and the power supply is secured with plastic clips, metal clamps, and nuts. When unplugging the power connector, you need to press the small hidden latch on the clip to successfully remove the power supply. Before preparing to replace the new bulb, the owner must choose a product that matches the original car bulb. During replacement, handle it the same way as when removing it, and avoid touching the bulb directly with your hands, as new bulbs contain internal gases. If they come into contact with oil from your hands, it will affect their lifespan. First, secure the bulb correctly in the base, then plug in the power cord, tighten the dust cover, and finally turn on the headlights to test. Precautions for using car lights: During nighttime when streetlights are on, or when driving in conditions of low visibility such as fog, rain, etc., the headlights, position lights, and rear lights should be turned on. When turning, changing lanes, overtaking, making a U-turn, or parking by the roadside, the turn signal should be activated 100 to 50 meters in advance.

15

3

Share

What Causes the ABS Light on the Dashboard to Illuminate?

There are various conditions for the ABS light to illuminate, and different conditions correspond to different fault causes and solutions, as detailed below: Condition 1: The ABS warning light stays on constantly (most common). Cause 1: The ABS wheel speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding wheel speed signal. This prevents the ABS computer from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal operation. Cause 2: Poor signal transmission due to loose connections between system lines or poor contact in the ABS relay, leading to system failure. Solution: Inspect the wiring connections and reconnect any loose parts. Condition 2: The ABS warning light intermittently illuminates and turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, causing the ABS light to turn off. Alternatively, the ABS system's power supply voltage may be too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). Condition 3: The ABS warning light remains on after engine startup and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; or ABS computer malfunction. Solution: Loosen and retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connectors. Replace the ABS or ABS/ASR computer if needed. Condition 4: The ABS warning light illuminates during high-speed driving. Cause: The ABS computer detects a significant discrepancy between the rear and front wheel speed signals during high-speed driving. Incorrect tire or wheel rim specifications may also be a factor. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. Condition 5: The ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, and push the brake switch linkage down fully with your fingers. Release the brake pedal to complete the self-setting process. Replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving, as it indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

12

2

Share

Is There a Mandatory Scrapping Age for Pickup Trucks?

The Wuling Hongguang S has a total of 10 models currently on sale. Among them, the 2020 models - 1.2L-S Basic Type National VI-LSI and the Basic Type Window-sealed Van, are equipped with a 76-horsepower engine, with an NEDC fuel consumption of 6.6L per 100km. The 2021 models - 1.5L-S Basic Type LAR, Standard Type, Comfort Type, etc., totaling six models, are equipped with a 99-horsepower engine, with an NEDC fuel consumption of 6.5L per 100km. The 2021 models - 1.5L-S Basic Type Window-sealed Van LAR and its modified versions, totaling two models, are equipped with a 99-horsepower engine, with an NEDC fuel consumption of 6.7L per 100km. The fuel tank capacity of the Wuling Hongguang S is 50L. The distance each model can travel on a full tank of fuel is as follows: Models equipped with the 76-horsepower engine can travel 50/6.6*100=757km on a full tank. The 2021 models - 1.5L-S Basic Type LAR, Standard Type, Comfort Type, etc., totaling six models, can travel 50/6.5*100=769km on a full tank. The 2021 models - 1.5L-S Basic Type Window-sealed Van LAR and its modified versions can travel 50/6.7*100=746km on a full tank. Automobile fuel consumption is directly related to five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle in advance when approaching traffic lights can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power output, requiring more gasoline to burn and perform work. Heavier vehicles also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline is less likely to atomize during cold starts, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

6

2

Share

Can the original license plate be retained when transferring vehicle ownership?

The original owner can retain the original license plate when transferring ownership. After the vehicle ownership is transferred, the original license plate can be applied for retention within two years. The right to use the license plate will be retained for two years after the transfer, meaning that if the original license plate is not used within two years, the license plate number will be automatically canceled. After the vehicle is transferred, if you still want to keep the original license plate, you should quickly go to the relevant department to apply the license plate number to your newly purchased vehicle. This way, you can continue to use the original license plate; otherwise, it will be automatically invalidated. To apply for the use of the original motor vehicle license plate number, the following conditions must be met: The application must be submitted within six months after the transfer or cancellation registration; The motor vehicle owner must have owned the original vehicle for more than three years; All traffic safety violations and accidents involving the original vehicle must be resolved. The documents required for the original owner to transfer a used vehicle include: the registration certificate, vehicle license, and ID card. The buyer needs to provide an ID card, and if they are from another region, a residence permit or temporary residence certificate is required. Vehicle transfer first requires a vehicle evaluation. The evaluation fee is generally 1%-2% of the assessed vehicle value, and other fees include license plate and vehicle license costs. The original vehicle's commercial insurance can be canceled (compulsory insurance cannot be canceled), or the insurance can be transferred to the buyer at the insurance company. Precautions when purchasing a used car: Incomplete documentation. Complete documentation for a used car includes: the vehicle registration certificate (or original purchase invoice), vehicle license, vehicle purchase tax payment certificate, road maintenance fee documentation, and compulsory insurance. If the vehicle registration certificate or vehicle license is missing, or if there are unpaid compulsory insurance or road maintenance fees, it can cause endless trouble for the buyer. Therefore, when purchasing a vehicle, if the seller cannot provide complete documentation, the buyer should be particularly cautious. Tampering with the odometer. Most consumers prefer to judge a vehicle's condition based on the odometer, and sellers often take advantage of this by tampering with the odometer. In reality, the odometer is not just an indicator of usage intensity but also a record of maintenance and replacement of other vehicle components. If buyers perform maintenance based on a tampered odometer reading, it can lead to a series of potential safety hazards. New paint covering external damage. When purchasing a used car, if the vehicle has been repainted and there are signs of repair around the front, rear, or A, B, and C pillars, the vehicle may have been involved in a major accident. Overhauling the engine to increase the price. Many consumers focus too much on the vehicle's engine and neglect the overall condition of the car body. Used car sellers take advantage of this by replacing engine components to make the engine appear younger, thereby inflating the price.

5

0

Share

Can the Electronic Version of the Vehicle License Be Used?

What is the size of the spare tire for the old Buick Regal?

What Causes Gear Grinding Noise When Shifting to Third Gear in a Manual Transmission Car?

What is the reason for a car's headlights having high beam but no low beam?

What Causes the ABS Light on the Dashboard to Illuminate?

Is There a Mandatory Scrapping Age for Pickup Trucks?

Can the original license plate be retained when transferring vehicle ownership?

Does Water in the Car Trunk Affect the Vehicle?

How to Compensate When a Motor Vehicle Collides with an Over-standard Electric Vehicle?

Will the paint chip on a car get bigger if left unrepaired?

What is the difference between the red and blue badges of the Great Wall Haval H6?