Can the Electronic Parking Brake Be Released Without Starting the Car?

How to Remove and Install Car Tires?

First, slightly loosen the tire nuts on the ground, then jack up the car and remove the nuts. Most car nuts are sized 17, 19, 18, or 21, and it's best to use a socket wrench for removal. Loosen all the nuts of the tire to be removed. Position the jack at the designated point on the car (locations vary by brand; refer to the vehicle manual). Once the tire is off the ground, tap around the tire with a hammer to loosen it (some people use their feet), then pull the tire off the bolts. Fit the replacement tire onto the bolts and hand-tighten all the nuts (since the tire is suspended, it's hard to tighten fully; use a socket wrench to tighten them just enough). Lower the jack to let the tire touch the ground. Use a torque wrench (with adjustable tightening force) set to the specified torque value as per the vehicle manual. Tighten the nuts in a diagonal sequence: 12←→6, 10←→4, 8←→2 (some tires have five nuts; follow the same diagonal pattern—never tighten them in order). The tire change is now complete. Note: Some people, lacking a torque wrench, resort to using a socket wrench and tightening the nuts by stepping on the handle. This is not recommended. If the nuts are too loose, they may come off while driving; overtightening by stepping can break the bolts. Following the manufacturer's specified torque value is the safest approach.

12

4

Share

What does the tilt button on a car sunroof mean?

The tilt button in a car is used to adjust the height of the steering wheel. Adjustment of the car steering wheel: Adjustable steering wheel height is quite important for a car as it allows drivers of different statures to find the most comfortable driving position. The steering wheel is an essential component for driving, as it controls the vehicle's trajectory. The car's steering system: The steering system consists of many components and is relatively complex. It includes the steering gear and power steering devices. There are three common types of power steering systems in cars: electro-hydraulic power steering, mechanical hydraulic power steering, and electric power steering.

12

3

Share

Do New Energy Vehicles Have Engines?

New energy vehicles do not have engines. Instead, they are equipped with electric motors. Working principle: Battery — Current — Power Regulator — Electric Motor — Powertrain System — Drives the vehicle (Road). Definition of Electric Motor: An electric vehicle motor refers to the drive motor used in electric vehicles. Depending on the operating environment and frequency of use, the form of the motor varies. Different types of motors have distinct characteristics. Classification of Electric Motors: Currently, permanent magnet DC motors are commonly used in electric vehicles. Electric vehicle motors can be categorized into brushed motors and brushless motors based on the method of electrical excitation. In terms of mechanical structure, they are generally divided into "geared" (high-speed motors requiring gear reduction) and "gearless" (torque output without any reduction) types.

2

1

Share

How to Properly Start a Car?

Start the engine and check if all the instrument indicators are functioning normally. Depress the clutch pedal and shift the gear lever into low gear. Turn on the left turn signal, honk the horn, and simultaneously observe the front, sides, above, and rearview mirrors of the vehicle to check for any obstacles that may hinder the car from starting. Safety must be prioritized during the starting process. Release the parking brake control handle. Hold the steering wheel, and with your left foot, gently release the clutch pedal while slowly pressing the accelerator pedal to ensure a smooth start. Once the car has entered the normal driving lane after starting, you can turn off the left turn signal. When starting the car, lifting the clutch pedal should follow the "fast, pause, slow" sequence and coordinate with the accelerator pedal. Quickly release the clutch pedal initially, but when you feel the engine power decrease slightly and the vehicle begins to shake, pause the clutch pedal at this position before slowly lifting it further. Simultaneously, gradually press the accelerator pedal to ensure a smooth start. If you sense the engine power is insufficient and it's about to stall, immediately depress the clutch pedal again and press the accelerator pedal appropriately to restart. The coordination between the clutch and accelerator pedals can be summarized as: lift the left foot quickly while listening for changes in engine sound, pause when the car shakes, press the right foot steadily to add throttle, and slowly lift the left foot to move the car forward. Depress the brake pedal, shift the gear lever into the D position, and verify that the D position indicator on the dashboard is correctly displayed. Turn on the left turn signal, honk the horn, and observe the front, sides, above, and rearview mirrors of the vehicle. If there are no obstacles, release the parking brake control handle. Lift the brake pedal and slowly and steadily press the accelerator pedal to ensure a smooth start.

13

2

Share

Under what circumstances can a motorcycle be replaced after a collision?

Motorcycles that are totaled in a collision can be replaced through insurance claims. A specific assessment from a repair shop is required. Main insurance types for motorcycles: To insure a motorcycle, the primary policies to consider are compulsory traffic insurance and commercial insurance. More specifically, these include compulsory traffic insurance, motorcycle damage insurance, third-party liability insurance, theft insurance, passenger liability insurance, spontaneous combustion insurance, scratch insurance, etc. Motorcycle compulsory traffic insurance: Compulsory traffic insurance refers to coverage where, in the event of a road traffic accident caused by the insured motorcycle resulting in personal injury, death, or property loss to victims (excluding the vehicle's occupants and the insured), the insurance company provides compensation within the liability limits.

2

0

Share

Should New Cars Use Premium Gasoline?

New cars do not require premium gasoline; simply use the octane rating specified for the vehicle. Break-in period considerations for new cars: After starting a new car, it's advisable to let it warm up for a while to allow the lubricating oil to circulate and fully lubricate the engine. This is particularly important for vehicles with turbocharged engines. Avoid high-speed driving during the break-in period—keeping the speed below 80 km/h is recommended, preferably not exceeding 100 km/h, and the engine RPM should ideally stay under 3,000. Fueling precautions: Use automotive gasoline only. Improper fuel can damage the fuel system and engine. Avoid gasoline containing methanol or alcohol. Take care not to spill fuel on painted surfaces to prevent damage. If the fuel door is frozen and cannot be opened, gently push or tap it to remove ice and open the door.

14

1

Share

Can the Electronic Parking Brake Be Released Without Starting the Car?

How to Remove and Install Car Tires?

What does the tilt button on a car sunroof mean?

Do New Energy Vehicles Have Engines?

How to Properly Start a Car?

Under what circumstances can a motorcycle be replaced after a collision?

Should New Cars Use Premium Gasoline?

What are the interior decorations for cars?

How to Use a Self-Balancing Scooter?

Why Do Beginners Often Stall the Car When Learning to Drive?

Should Naturally Aspirated Engines Use 92 or 95 Octane Gasoline?