Can the driving school period be extended?

1 Answers
DallasDella
07/29/25 9:39pm
If the validity period for obtaining a driver's license has expired, it cannot be extended, and the results of all completed subjects will become invalid. Therefore, there is naturally no concept of an extension fee. The 3-year validity period means that all subjects from Subject 1 to Subject 4 must be completed within this timeframe, otherwise, you will need to re-register and start over from Subject 1. Here is additional information: Relevant regulations: According to Article 38 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," applicants learning to drive on training grounds and roads must obtain a learning driving certificate as required. The learning driving certificate is valid for three years, and applicants must complete the Subject 2 and Subject 3 tests within this validity period. If the tests are not completed within the validity period, the results of any passed subjects will be invalidated.
Was this review help?
1
0
Share
More Forum Discussions

What Causes Abnormal Noise When Starting the Car and Braking?

The reasons for abnormal noise when starting the car and braking are: 1. Brake run-in; 2. Normal activation of the ABS system; 3. Metal hard spots on the brake pads; 4. Severe wear of the brake disc; 5. Improper installation of the brake pads; 6. Sharp noise when braking in reverse; 7. Small stones or a water film between the brake disc and pads; 8. Foreign objects in the braking system; 9. Severe wear of the brake pads. The function of the brake is to reduce speed or stop the vehicle. Its working principle is: by using the friction between the brake pads and the brake drum, as well as between the tires and the ground, the kinetic energy of the moving vehicle is converted into heat energy after friction, thereby slowing down or stopping the car.
15
4
Share

Can an Out-of-Town Vehicle Get Local License Plates?

An out-of-town vehicle can obtain local license plates. After purchasing a vehicle in another location, you need to obtain temporary license plates locally by presenting the purchase invoice, vehicle certification, and other relevant documents. Additionally, you must purchase compulsory traffic insurance locally before driving the vehicle back. The method for installing license plates is as follows: 1. Take out the license plate screws and insert them into the anti-theft caps by rotating; 2. Position the license plate correctly, align the screws with the gaps on the bumper, and secure them using tools; 3. Cover the anti-theft caps and press them into place. The functions of license plates include: 1. Numbering and registering information for each vehicle; 2. Identifying the region to which the vehicle belongs; 3. Tracing the owner and registration details of the vehicle based on the license plate.
4
5
Share

What are the effects of having slightly less engine oil in a car?

The effects of having slightly less engine oil in a car include: 1. Causing bearing seizure leading to severe engine failure; 2. Accelerating engine wear; 3. Affecting the engine lubrication system and piston heat dissipation. If the engine oil is low, it can be topped up, but it is important to note that the added oil must be the same brand and type, as other specifications cannot be mixed. The functions of engine oil are: 1. Lubrication and friction reduction; 2. Assisting in cooling; 3. Sealing and preventing leaks; 4. Rust and corrosion prevention; 5. Shock absorption and cushioning. The steps for changing engine oil are: 1. Lift the car, remove the protective plate, and place a container under the drain plug; 2. Unscrew the drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the drain plug after draining and wipe it with a tissue to check for leaks; 3. Reinstall the protective plate, lower the car, and use a funnel to add oil through the filler port.
9
3
Share

What Causes Engine Shaking and Loud Noise During Cold Start?

Cold start engine shaking and loud noise are caused by: 1. Excessive oil viscosity before reaching normal operating temperature; 2. Higher than normal RPM; 3. Mechanical components not yet at optimal temperature. The engine system consists of: 1. Valve train; 2. Crankshaft and connecting rod assembly; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system. Engine maintenance methods include: 1. Using qualified engine oil; 2. Using qualified coolant/antifreeze; 3. Regular radiator descaling; 4. Periodic engine carbon deposit cleaning; 5. Timely replacement of three automotive filters; 6. Maintaining appropriate RPM.
2
5
Share

What is the difference between 102t and 102h tires?

The difference between 102t and 102h tires lies in their speed ratings: the maximum speed for 102t tires is 190 km/h, while for 102h tires it is 210 km/h. The functions of tires are: 1. To transmit driving force, braking force, and steering force for vehicle operation; 2. To support vehicle load; 3. To reduce and absorb vibrations and impact forces during driving, preventing severe vibrations from damaging vehicle components. Tire maintenance methods include: 1. Regularly removing stones stuck in tire treads; 2. Minimizing exposure to direct sunlight; 3. Promptly checking tire pressure; 4. Paying attention to suspension system maintenance.
1
5
Share

How to Set Cruise Control on MG6?

The method to set cruise control on MG6 is: 1. When the ignition switch is in the ON position, the cruise control system is in standby mode; 2. With the cruise control system in standby and vehicle speed exceeding 40 km/h, press the SET button at the end of the stalk switch to activate cruise control; 3. Push the stalk switch upward and hold to accelerate automatically; 4. Move the stalk switch to CANCEL position or depress brake pedal to pause. Taking the 2020 MG6 as an example, its body dimensions are: length 4704mm, width 1848mm, height 1466mm, wheelbase 2715mm, with a 50-liter fuel tank capacity.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.