Can the driver's license test be postponed?

1 Answers
SanAdrian
07/30/25 8:46am
The driver's license test cannot be postponed once it expires. Here are some important notes about taking the driver's license test: The second subject test mainly focuses on "points": As long as you master the key points, stay focused and not nervous when getting in the car, and practice for a while, you can grasp the essentials. When others are practicing, reflect on your own shortcomings and actively communicate with others to learn from their strengths. The third subject is the road test: Especially when driving on roads with many people and vehicles, you need to be extra careful, observe the situation outside the car more, don't be nervous, and just follow the procedures and instructions. Luck also plays a big role in the third subject. Some people are blocked by incoming vehicles when they are about to reach the finish line because those vehicles may not follow the rules or yield proactively.
Was this review help?
18
2
Share
More Forum Discussions

What are the symptoms of a faulty ball joint in the control arm?

The manifestations of a faulty lower control arm ball joint include the following categories: 1. The vehicle's tires will abnormally wobble during driving, leading to irregular tire wear, accompanied by relatively loud noise. 2. When accelerating, the steering wheel will vibrate, and there will be noises from the chassis when driving on bumpy roads. 3. A "clunking" abnormal sound will come from the steering wheel. Since the lower control arm is part of the steering system, a damaged lower control arm bushing directly affects the vehicle's dynamic driving performance, causing the vehicle to pull to one side, significant wear affecting steering adjustment, which is highly detrimental to safety. In such cases, it is recommended to visit a repair shop for relevant inspections and perform a four-wheel alignment after adjustments.
11
5
Share

What is the bulb model for the Everest's headlights?

Ford Everest uses H7 for low beam and HB3 for high beam. Here is relevant information about the Everest: 1. Product Introduction: The Ford Everest is an ORV (Off-Road Vehicle) with a body-on-frame construction. This highly anticipated rugged SUV is locally produced in China by Ford's joint venture Jiangling Motors and sold through Ford brand authorized dealership networks under Jiangling. 2. Body Dimensions: Regarding body dimensions, the Everest measures 4892mm in length, 1862mm in width, and 1837mm in height, with a wheelbase of 2850mm. Due to its ladder-frame chassis structure, the Everest has a noticeably tall profile. It also boasts an impressive 227mm ground clearance and 800mm wading depth, outperforming other vehicles in its class.
4
4
Share

What Restrictions Do Not Apply to Sweeper Vehicles?

Road maintenance vehicles and engineering operation vehicles are not restricted by traffic signs and markings in terms of their driving routes and directions while performing tasks, provided that they do not affect the passage of other vehicles. Passing vehicles and pedestrians should yield the right of way. Water sprinklers, sweeper vehicles, and other motor vehicles should operate according to safety standards; they are not restricted by lane division regulations when not affecting other vehicles' passage, but they must not drive in the opposite direction. Fire Hazard Precautions: When maintaining road sweeper vehicles, flammable materials such as oils and cleaning agents are often used. It is essential to follow standard operating procedures and implement fire prevention measures, keeping a fire extinguisher on hand to prevent fires. Do not smoke or ignite flames near the fuel tank or battery, as flammable gases from the fuel tank and hydrogen from the battery can easily catch fire. Burn Hazard Precautions: After the vehicle has been in use for some time, components such as the radiator, exhaust pipes, power steering fluid reservoir, and spark plugs can become very hot. Avoid contact to prevent burns. Mechanical Injury Precautions: Before starting the vehicle, check the initial gear position to avoid collisions caused by excessive starting speed. When working under the engine hood, clear the cab to prevent accidental injury from sudden engine movement or others' operational errors. Avoid Damaging the Sweeper Vehicle: Take care not to damage the road sweeper vehicle, especially to prevent brake fluid leakage. Brake fluid can damage the vehicle's paint film and, if accidentally splashed into the eyes, can impair vision or even cause blindness. In case of accidental exposure, rinse immediately with clean water.
6
3
Share

Which is safer, automatic transmission or manual transmission?

Relatively speaking, automatic transmission is safer. Here are the specific details: 1. Firstly, automatic transmission has certain advantages, especially for those with poor driving skills. Manual transmission requires constant gear shifting, while automatic transmission eliminates this hassle. In cities with frequent traffic congestion, operations that only require the use of two feet are naturally easier than frequent gear shifting. 2. Automatic transmission is a foolproof operation, with commands issued by the computer. However, if the driver shifts gears while driving, the car might forcibly engage other gears, leading to conflicts and potential damage to the vehicle. 3. Whether to choose manual or automatic transmission depends entirely on personal preference. To ensure absolute driving safety in the true sense, it still depends on the driver themselves. When driving, one should be bold yet careful, calmly handling any situations that arise. Remember, it's better to be slower than to rush for speed.
12
2
Share

What Causes Abnormal Engine Noise During Cold Start?

Abnormal engine noise during cold start may be caused by issues such as a faulty carbon canister purge valve, secondary injection system malfunction, or electric vacuum pump failure. Engine noise can also result from excessive engine load intensity. The causes of abnormal engine noise are as follows: 1. If the noise occurs within half a minute after cold start and then disappears, it is mostly due to thermal expansion noise from the catalytic converter. 2. Loud noise during cold start is often caused by wear, elongation, or loosening of the timing belt/chain, or failure of the chain tensioner to maintain proper tension. 3. Air conditioning belt friction noise - if the noise only occurs when the AC is turned on, it may be caused by friction in the AC belt.
17
3
Share

What are the reasons for low brake fluid?

The reduction in brake fluid may be due to thinning brake discs or leakage into the vacuum booster pump. The reasons for low brake fluid are as follows: 1. Thinning of brake pads leads to fluid reduction. Generally, brake pads can last up to 80,000 kilometers. If the vehicle is used frequently and braking is more frequent, the brake pads experience more friction and wear out faster. If the vehicle is used less and the driver prefers to decelerate using the engine before applying the brakes, the brake pads wear out much slower. 2. As the brake pads wear down and become thinner, the piston inside the brake caliper gradually extends to adjust for the gap caused by wear. The piston is pushed by the pressure generated by the brake fluid when braking. The adjustment of the piston increases the internal space of the brake caliper, which is then filled by the brake fluid. This results in a noticeable reduction of brake fluid in the reservoir.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.