Can the driver's license exam fees be paid collectively after completing the test?

What to Do When the Car Navigation System Is Not Sensitive?

Detailed reasons and solutions for the insensitivity of the car navigation system are as follows: 1. Static electricity interference: Although the surface glass of the navigation touch screen is treated with anti-static measures, it is still susceptible to static electricity, especially conductive media such as oil and sweat from the driver's hands. Solution: Press the restart button; if there is a response, use a stylus or a thin wire to recalibrate it. 2. High temperature impact: The navigation touch screen is sensitive to high temperatures. If the temperature inside the car reaches around 40℃, it may cause the capacitive screen to drift. Therefore, try to avoid exposing the car to direct sunlight. Solution: When parking the vehicle, choose a shaded and cool place. 3. Quality issues: Poor quality of the car navigation system itself. Solution: Visit a 4S shop to have professionals perform a system reset or replace the screen.

11

0

Share

Are Motorcycles Eligible for Toll-Free Highway Access?

Free during holidays, not free on non-holidays. 1: Legal provisions: Article 78 of the "Regulations for the Implementation of the Road Traffic Safety Law" states that motorcycles meeting relevant requirements are allowed to drive on highways under safe conditions, with a speed limit not exceeding 80 kilometers per hour. 2: Requirements for motorcycle drivers: (1) The driver must hold a corresponding motorcycle driving license. (2) The motorcycle driver must wear a safety helmet as required. (3) Motorcycles on the highway cannot carry passengers. (4) Motorcycles on the highway must only drive in the far-right lane. (5) The minimum speed for motorcycles on the highway is 60 km/h, and the maximum speed is 80 km/h. As long as all the above conditions are met, motorcycles can access the highway for free during holidays.

2

5

Share

Which manufacturer produces Zhengbang tires?

Shandong Zhengbang tires are produced by Chaoyang. Precautions for using car tires are as follows: 1. Tire alignment: If you notice uneven tire wear or excessive vehicle vibration while driving, promptly check the tire alignment. Failure to address this issue may affect vehicle handling and, in severe cases, lead to hazardous situations. 2. Regularly check tire pressure: Tire pressure directly impacts tire performance. Insufficient pressure increases friction with the road surface, accelerating tire wear. It is recommended that owners check tire pressure monthly, using the parameters suggested by the vehicle manufacturer as the standard. 3. Stop using tires when they reach the wear indicator: Wear indicators are typically designed at a remaining tread depth of approximately 1.6 mm in the tire grooves. Tires must be replaced when worn to this indicator, as driving with tires beyond this point is particularly dangerous on wet surfaces due to significantly reduced drainage and compromised wet traction. 4. Avoid hitting obstacles: High-speed impacts with potholes or other obstacles can cause severe deformation between the obstacle and the wheel rim flange, leading to bulges or sudden tire deflation.

5

1

Share

How Deep of Water Can the Sagitar Cross?

The Sagitar's maximum wading depth is 70 cm, while the safe wading depth is 31 cm. Below is an introduction about the Sagitar: 1. Wading: The Sagitar's exhaust pipe has a ground clearance of 32 cm, and the half-height of the wheels is 31 cm. These two heights are roughly at the same level, indicating that the Sagitar's safe wading height is around 30 cm. Above this height, water may enter the exhaust pipe. However, as long as you maintain steady driving, the vehicle won't stall. There's no need to accelerate heavily to pass through; you can confidently wade through the water. 2. Reasons: The engine has three potential water entry points: the air filter, the oil dipstick hole, and the exhaust pipe. The first two are roughly level with the top of the tires, so as long as the water doesn't submerge the front wheels, it's not a concern. The exhaust pipe is lower, but even if submerged, as long as the engine is running, it continuously expels gases, preventing water from entering. The biggest risk with a submerged exhaust pipe is stalling—the moment the engine stalls, the negative pressure in the cylinder could draw water in.

8

2

Share

Are the Three Major Components of the Sehol QX from Volkswagen?

Sehol QX's three major components are not produced by Volkswagen. The engine is a domestically produced engine by the Jianghuai Group, as Volkswagen does not have a 1.5T engine. Similarly, Volkswagen does not have CVT transmissions, which are predominantly used in domestic and Japanese vehicles. The chassis does not specify a specific model, making it difficult to verify. Below is an introduction to automotive components: 1. The Three Major Components of a Car: These refer to the engine, transmission, and chassis. The quality of these three components significantly impacts the overall quality of the car. Therefore, it is recommended to pay close attention to the quality of these components when purchasing a car. 2. Engine and Transmission: These belong to the powertrain of the car. The engine is the heart of the car, generating power that is transmitted to the transmission. The transmission then transfers this power to the wheels via the driveshaft. The role of the transmission is to vary speed and torque, ensuring the engine's output meets the car's demands under any operating conditions. There are two main types of transmissions in cars: manual transmissions and automatic transmissions. Common automatic transmissions in cars include three types: AT transmissions, CVT transmissions, and dual-clutch transmissions.

1

3

Share

Does an Automatic Transmission Car Shake When Shifting to Reverse?

An automatic transmission car shaking when shifting to reverse gear may be due to insufficient or dirty transmission fluid. Here are the details about automatic transmission gear positions: 1. P (Park) Position: This is the parking and starting position. When engaged, the parking lock mechanism locks the transmission output shaft. 2. R (Reverse) Position: This is the reverse gear. Engaging this position connects the hydraulic system's reverse gear circuit, causing the drive wheels to rotate in reverse for backward movement. Never force the gearshift into "R" position when the vehicle isn't completely stopped, as this may damage the transmission. 3. N (Neutral) Position: This is the neutral gear. When engaged, the planetary gear system idles without power output. 4. D (Drive) Position: This is the forward drive position. When the gear selector is in this position, the hydraulic control unit automatically engages appropriate forward gears based on throttle opening and vehicle speed signals, enabling automatic shifting according to driving speed for automatic transmission functionality. 5. S (Sport) Position: This is sport mode. When selected, the transmission control module receives the driver's command, putting the vehicle into sport mode with more aggressive shift logic, frequent gear changes, enhanced throttle response, and improved driving dynamics for greater driving pleasure.

18

5

Share

Can the driver's license exam fees be paid collectively after completing the test?

What to Do When the Car Navigation System Is Not Sensitive?

Are Motorcycles Eligible for Toll-Free Highway Access?

Which manufacturer produces Zhengbang tires?

How Deep of Water Can the Sagitar Cross?

Are the Three Major Components of the Sehol QX from Volkswagen?

Does an Automatic Transmission Car Shake When Shifting to Reverse?

What does the T in car displacement mean?

What does it mean to have missed three consecutive inspection cycles?

What Causes the Noise When Turning the Steering Wheel Left and Right While Stationary in a Magotan?

Where is the heated mirror switch for the Eado?