Can the driver's license and vehicle license be kept together?

1 Answers
EmilyDella
07/30/25 4:45am
The driver's license and vehicle license can be kept together. For safety reasons, the correct practice is to carry the two documents separately, such as keeping one in the car and carrying the other with you, or hiding one in an inconspicuous location in the vehicle. If both documents are stolen or lost, the following measures should be taken: 1. Replacement: Go to the local vehicle management office as soon as possible to apply for a replacement, leaving no time for criminals to forge them. If you are in a different location, simply fill out an application form at the local vehicle management office, submit a lost declaration, and provide your ID card to proceed with the replacement. 2. Online Replacement: Apply for a replacement online by downloading the "Traffic Management 12123" mobile app, registering and binding your driver and vehicle information, then clicking "Driver's License Replacement" or "Vehicle License Replacement" to proceed. The vehicle management office will review and issue the documents, then mail them back to you.
Was this review help?
9
0
Share
More Forum Discussions

Can 84 Disinfectant Be Used to Disinfect the Interior of a Car?

84 disinfectant can be used to disinfect the interior of a car, but it must be diluted at a ratio of 1:200. Below are some related introductions to car disinfection: 1. Ozone Disinfection for Cars: Ozone disinfection utilizes the car's air conditioning circulation system. By introducing a specialized disinfectant into the circulation system, it can eliminate odors inside the car and has certain disinfecting effects on amines, nicotine, bacteria, etc. 2. Chemical Disinfection: Chemical disinfection involves using disinfectants such as peracetic acid, Lysol, and 84 disinfectant to wipe and clean frequently touched areas inside the car, such as door handles and the steering wheel, which can also provide some disinfecting effects. 3. Photocatalytic Disinfection: Photocatalytic disinfection refers to the chemical reaction between a photocatalytic coating and sunlight, which rapidly decomposes harmful substances inside the car. This method can also serve the purpose of purifying the air.
10
2
Share

How many people can take the Subject 4 test at one time?

Approximately 400 people can take the test in one day. Below are some tips related to the Subject 4 test: Judgment questions in the written test: Judgment questions may involve identifying patterns, determining which operations are allowed and which are not. Additionally, questions that mention slowing down the vehicle or driving slowly are generally correct. Questions about car lights: Check if the test paper mentions turning on the high beams; generally, Subject 4 rarely includes questions about using high beams. Questions about vehicle speed: For speed-related questions, remember specific speed limit data. For example, at city intersections without speed limit signs, the speed should generally not exceed 40 km/h. On city roads, the speed limit is usually around 45 km/h. On one-way roads, the speed limit for motor vehicles is 55 km/h, and on regular roads, it is typically around 70 km/h.
12
2
Share

Does Audi Have Image and Distance Sensors?

Audi does have image and distance sensors. Introduction to Rearview Camera: The rearview camera, also known as the parking assist system, reverse visual system, or vehicle monitoring system, is referred to in English as the vehicle backup camera. This system is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. Functions of the Rearview Camera: The rearview camera system provides clear visibility even at night through infrared technology. Professional vehicle-mounted probes have enhanced resistance to magnetism, shock, water, and dust. The vehicle-mounted display uses TFT true color, with anti-magnetic treatment to eliminate signal interference and flickering. It can simultaneously receive two video inputs, play VCDs and DVDs without a decoder, and features automatic level switching and automatic on/off functions for reversing visibility. The dashboard or rearview mirror display clearly shows the information captured by the rear-mounted camera. Additionally, two rearview cameras can be installed to eliminate blind spots during reversing.
9
2
Share

Is the left foot allowed to rest on the clutch during Subject Three?

Do not keep the left foot resting on the clutch during Subject Three. Below is relevant knowledge about Subject Three: Test Content: The test generally includes: preparation before starting, light simulation test, starting, driving straight, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing traffic signals, safe driving knowledge on complex roads, safe driving knowledge in emergencies such as light malfunctions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. Precautions: The new regulations emphasize preparation before starting. Before getting in the car, carefully check your safety, ensure the doors are properly closed when getting in and out, fasten the seatbelt after entering the car, turn on the low beam before starting, release the handbrake promptly when starting in neutral, and fasten the seatbelt before getting in the car.
13
4
Share

Which one is the Enclave motor relay?

The Enclave motor relay is labeled with its English abbreviation inside the fuse box. Working principle of the relay: The coil of the starting relay is connected in series with the running winding of the compressor motor. During motor startup and operation, the operating current passes through the relay coil, while the control contacts are connected in series with the starting winding, controlling its closure and disconnection. The control contacts of the relay are normally open. When power is first applied, current flows only through the relay coil and the running winding. Since the rotor is stationary, the starting current is very high, causing the relay coil to attract the armature upward, closing the moving and stationary contacts and connecting the starting winding, which allows the compressor to begin rotating. As the speed increases, the current decreases, and the armature falls back by its own weight, opening the contacts and completing the starting process. Function of the starting relay: It assists the motor in starting and automatically disconnects the auxiliary winding after startup to prevent burning out the auxiliary winding coil. When the motor's running winding is energized and the startup phase transitions to normal operation, the starting relay cuts off the power to the starting winding.
15
1
Share

What are the chassis codes for previous generations of the Fit?

The chassis code for the Fit is GK5. Function of the chassis: The chassis serves to support and install the car's engine and its various components and assemblies, forming the overall shape of the vehicle. It receives the engine's power to enable the car's movement and ensure normal driving. Additionally, a good chassis can safeguard the driver's life. Components of the chassis: The chassis consists of four main parts: the transmission system, the running gear, the steering system, and the braking system. The transmission system mainly includes the clutch, gearbox, universal joint, drive shaft, and drive axle. The running gear is composed of the frame, axle, suspension, and wheels, with the basic function of supporting the vehicle's weight and ensuring its movement. The steering system consists of the steering wheel, steering gear, steering knuckle, steering arm, tie rod, and drag link, all of which work together to enable steering. The braking performance of a motor vehicle refers to its effectiveness in forcing the vehicle to stop in the shortest possible time.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.