Can the daytime running lights of the new X-Trail be turned off?

What is the wading depth of the Q5?

The maximum wading depth of the Audi Q5 is 500mm. The wading depth of the Audi Q5 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Audi Q5 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. Alternatively, installing a snorkel can increase the height of the engine's air intake, thereby improving the maximum wading depth. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. For roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate the water depth before deciding whether to proceed. Understand your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, avoid entering the water and choose an alternative route.

17

2

Share

The Difference Between Long Wheelbase and Short Wheelbase?

The differences between long wheelbase and short wheelbase are: In terms of comfort: Long wheelbase models offer better comfort but are relatively more difficult to handle; short wheelbase models generally provide average comfort. In terms of space: Long wheelbase models have more space and appear more premium visually; short wheelbase models have less space compared to long wheelbase models. In terms of driving difficulty: Long wheelbase models are more challenging to drive, particularly in terms of being less flexible and convenient when cornering, changing lanes, or in congested traffic conditions. Short wheelbase models have the advantages of better handling, improved rear-end tracking, and a relatively smaller turning radius. For SUV models, short wheelbase versions have a larger approach angle, giving them better off-road capability compared to long wheelbase models.

16

4

Share

Is Taihao Che affiliated with Pacific?

Yes. Taihao Che is actually a mini-program developed by Pacific Auto Insurance Company. Consumers can directly search for Taihao Che on the Baidu mini-program platform to access the Taihao Che mini-program, where they can purchase auto insurance or non-auto insurance products, as well as access related services such as electronic policy documents, electronic invoices, claims processing, and other value-added services. During online interactions with consumers, Taihao Che customer service can send a payment-enabled QR code to consumers. After verifying the information, consumers can scan the QR code themselves to proceed directly to the payment process within the mini-program. Additionally, the mini-program displays various promotional activities offered by the company, allowing consumers to click and participate in relevant activities directly.

4

0

Share

Can Tire Damage Be Claimed on Insurance?

Tire damage alone cannot be claimed under vehicle damage insurance. However, if the tire damage is caused by a vehicle accident, it can be claimed under vehicle damage insurance. Here is a detailed introduction about tires: Functions of Tires: Tires support the entire weight of the vehicle, bear the load of the car, transmit traction and braking torque, ensure the adhesion between the wheels and the road surface, reduce and absorb vibrations and impacts during driving, prevent severe vibrations and early damage to vehicle components, adapt to the high-speed performance of the vehicle, reduce driving noise, and ensure driving safety, handling stability, comfort, and fuel economy. Tire Maintenance Methods: Tire maintenance methods include regularly cleaning stones from tire treads, minimizing exposure to direct sunlight, frequently checking tire pressure, paying attention to suspension maintenance, regularly inspecting front wheel alignment, and being mindful of driving habits.

16

2

Share

What Causes the Abnormal Noise When Pressing the Car Brakes?

Here are the specific reasons for the abnormal noise when pressing the car brakes: Improper installation of brake pads: When installing new brake pads, the old brake disc was not polished, resulting in a poor fit. Improper installation or fitting new pads without polishing the old disc causes the new pads to directly rub against the uneven surface of the old disc, eventually leading to uneven wear of the new brake pads. Brake system malfunction: There may be defects in the brake system itself, causing the brake pads to only partially contact the brake disc. This increases the pressure per unit area on the brakes, resulting in abnormal noise. It is recommended to check components such as the caliper and guide pins. Presence of foreign objects: Foreign objects cause a poor contact surface, leading to abnormal noise.

18

1

Share

Is an Annual Review Required for a B2 Driver's License Without Demerit Points?

B2 driver's license without demerit points does not require an annual review. According to legal provisions, if there are demerit point records for B-class licenses or above, a review must be conducted within thirty days after the end of the scoring cycle. However, if there are no demerit point records, the review for this scoring cycle can be exempted. Here are the specific details about the annual review of driver's licenses: Annual Review Time: Drivers holding A, B, N, or P-class licenses, C-class license drivers engaged in commercial transportation, and drivers over 60 years old must undergo an annual review once a year. Drivers holding other class licenses must undergo a review every two years. The review deadline is based on the annual review validity period indicated on the "Supplemental Certificate" of the driver's license. Drivers who fail to undergo the review on time will be fined 100 yuan. Required Materials: Submit the original and photocopies of the driver's license and ID card of the motor vehicle driver. A medical certificate issued by a county-level or above medical institution or a military regiment-level medical institution regarding the physical condition of the motor vehicle driver. The driver needs to submit three one-inch photos. Fill out the "Motor Vehicle Driver's License Application Form" at the vehicle management office.

5

4

Share

Can the daytime running lights of the new X-Trail be turned off?

What is the wading depth of the Q5?

The Difference Between Long Wheelbase and Short Wheelbase?

Is Taihao Che affiliated with Pacific?

Can Tire Damage Be Claimed on Insurance?

What Causes the Abnormal Noise When Pressing the Car Brakes?

Is an Annual Review Required for a B2 Driver's License Without Demerit Points?

Will the insurance company reimburse for flood-damaged vehicles?

Can You Pass the Driving Test Without Using Fifth Gear?

Brief Description of the Micrometer Reading Method

Basic Structure and Principles of Automobiles