Can the Dash Cam Pick Up Sounds Inside the Car?

1 Answers
MacJames
07/29/25 6:43pm
Dash cams can pick up sounds inside the car because they have a recording function, which can be activated in the settings. Dash cams are capable of recording both video and audio during driving, making them a reliable device for providing evidence. When installing a dash cam, it is important not to edit the video footage, as doing so may render it useless in the event of an accident. This also helps prevent unavoidable fraudulent claims in today's society. Depending on the vehicle model and functionality, dash cams can be categorized into: high-definition dash cams, night vision dash cams, wide-angle dash cams, dual-lens dash cams, multi-function integrated devices, and glasses-style multi-function dash cams.
Was this review help?
11
2
Share
More Forum Discussions

What is the material of the CFMOTO 250SR wheel hub?

The material of the CFMOTO 250SR wheel hub is aluminum alloy. Definition of wheel hub: The wheel hub is the rotating part where the inner rim of the tire connects to the wheel center through spokes, i.e., the metal component mounted on the axle that supports the tire. It is also called wheel rim, steel rim, or simply rim. Wheel hubs come in various types based on diameter, width, manufacturing method, and material. Advantages of aluminum alloy wheel hubs: Low density, approximately 1/3 that of steel, meaning an aluminum alloy wheel hub of the same volume will be 2/3 lighter than a steel one. Aluminum alloy can be age-hardened; untreated aluminum alloy wheel hub castings have low strength, making them easy to machine and form. After corrosion-resistant treatment and painting, aluminum alloy wheel hubs exhibit diverse colors and exquisite, aesthetically pleasing finishes.
4
3
Share

Why Do Motorcycles Need to Blip the Throttle When Downshifting?

Motorcycles blip the throttle when downshifting to eliminate the speed difference between the engine and the transmission, ensuring the engine speed matches the gear as closely as possible. This helps reduce the jerking sensation during downshifting. Functions of Throttle Blipping When Downshifting: When shifting from a higher gear to a lower gear, it makes the transition smoother and reduces engine braking. Maintaining high RPMs allows for quicker acceleration after exiting a turn. It also protects the transmission and reduces brake pressure. How to Perform Throttle Blipping When Downshifting: First, press the clutch, then shift the gear lever to neutral. Next, blip the throttle with your right foot, shift the lever into the lower gear, and release the clutch—all in one smooth motion. The key challenge is mastering the throttle input: it must be just enough to prevent jerking, and adjustments should be made based on speed and gear.
17
5
Share

Should You Press the Brake When Turning the Steering Wheel While Stationary?

Turning the steering wheel while stationary does not require pressing the brake. Hazards of Turning the Steering Wheel While Stationary: The first component that gets damaged is the steering wheel. When turning the steering wheel while stationary, the wheels do not rotate, especially the front wheels, which bear most of the vehicle's weight and need to move while stationary. This inevitably increases wear on the tire tread or sidewalls. Over time, it can cause uneven tire pressure distribution, increasing driving risks. The second component affected is the increased load on the steering gear. Even though many modern vehicles use hydraulic or electric power steering to reduce the driver's effort, the load on the steering gear remains unchanged. Turning the steering wheel while stationary forces the steering gear to operate under maximum load conditions. Precautions When Turning the Steering Wheel While Stationary: Avoid turning the steering wheel while stationary when pressing the brake. Avoid turning the steering wheel while stationary when the wheels are close to the curb. Avoid turning the steering wheel while stationary when the wheels are against the curb or an obstacle. Avoid turning the steering wheel while stationary when the wheels are stuck in mud.
8
0
Share

What Causes the Engine Flywheel to Fail to Rotate?

There are several reasons why an engine's flywheel may fail to rotate: Excessive Tightness Between Bearing Bush and Journal: This is usually caused by new bearing bushes not being properly scraped, misalignment of upper and lower bearing shells, excessive installation height of bearing shells, incorrect placement of shims behind the bearing shells, or over-tightening of connecting rod bolts or main bearing cap bolts, leading to deformation of the bearing shells and localized seizure with the crankshaft journal. Compression of the Balance Shaft: In single-cylinder diesel engines, missing or improperly installed gaskets between the oil pump and the engine block can cause the oil pump shaft to compress the balance shaft below when the pump body bolts are tightened. Excessively Thin Gasket: In single-cylinder diesel engines, an overly thin gasket between the engine and the block can result in severe friction between the starting shaft shoulder and the gear housing cover. Defective Parts: Misalignment of the journal or the holes in the engine block's bearing seats, or interference between the small end of the connecting rod and the piston.
11
1
Share

What Causes the Abnormal Noise When Depressing the Clutch in a Sedan?

The reasons for abnormal noise when depressing the clutch in a sedan are as follows: Clutch Release Bearing: After wading through water, the release bearing may get water inside, leading to loss of lubricant, rust, dry friction, and other factors that can cause damage to the release bearing. Lack of Lubricant: The return spring of the clutch pedal lacks lubrication oil. Clutch Disc Wear: During driving, after shifting gears, if the clutch pedal is not fully released, the clutch disc and the clutch pressure plate cannot fully engage, causing mutual friction and abnormal wear of the clutch disc. Clutch Pressure Plate Spring Breakage: The spring inside the clutch disc is called a damping spring. The clutch, as a critical component in the drivetrain for transmitting engine torque, can suffer damage due to instantaneous impact loads caused by torsional vibrations in the drivetrain from engine torque variations, rapid clutch release, or emergency braking.
9
4
Share

Should You Press the Brake When Turning the Steering Wheel While Stationary?

You do not need to press the brake when turning the steering wheel while stationary. Pressing the brake while turning the steering wheel can accelerate front tire wear and damage the power steering mechanism. Below is a detailed analysis: Accelerated Front Tire Wear: In most cars, the front wheels serve as both steering and driving wheels, which inherently experience more wear than the rear wheels. Frequent stationary steering can accelerate front tire wear, increasing driving safety risks. Damage to the Power Steering Mechanism: It can damage the power steering mechanism, increasing its workload and accelerating aging and wear. When turning the steering wheel while stationary, the wheels do not rotate around the center point of the tire like a bicycle; instead, they move in a circular motion around the steering knuckle axis. In this state, the wheel's movement resembles pushing a millstone. Pressing the brake prevents the wheels from rotating freely, forcing them to scrape against the ground, which imposes significant impact forces on the steering system and suspension.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.