Can the color of fog lights be changed?

1 Answers
DeBradley
07/29/25 6:53pm
Car fog lights can have their color changed. Below is a detailed introduction to the classification of automotive lights: 1. Headlights: Combined headlights are located at the front of the car, primarily serving illumination and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling drivers to travel safely at night. 2. Combined taillights: Combined taillights are located at the rear of the car, mainly serving illumination and signaling purposes. 3. Turn signals: Used to indicate left or right turns to other road users. Regulations require them to be amber in color. 4. License plate lights: License plate lights primarily illuminate the license plate, making it distinguishable at night.
Was this review help?
17
2
Share
More Forum Discussions

What Causes Increased Engine Oil Level and Emulsification in the 2021 Toyota Models?

Reasons for increased engine oil level and emulsification: 1. Increased engine oil level: When the engine frequently operates under low-temperature and low-speed conditions, the oil temperature does not rise sufficiently. Water and gasoline mixed in the oil fail to evaporate, accumulating over time and causing the oil level to increase. 2. Engine oil emulsification: The essence of oil emulsification is the mixing of water and oil, resulting in a white emulsion. The causes of oil emulsification include the condensation of water vapor in the crankcase under low temperatures, which then permeates into the oil, and the tendency of ethanol gasoline to absorb moisture, introducing water from the air into the engine cylinders. When a vehicle operates for extended periods under low-temperature and low-speed conditions, the water cannot evaporate and remains trapped in the oil, leading to emulsification issues when mixed together.
17
0
Share

What is the windshield wiper size conversion chart?

Windshield wiper size and length conversion: 14"--350mm; 16"--400mm; 18"--450mm; 20"--500mm; 21"--525mm; 22"--550mm; 24"--600mm; 26"--650mm. For every additional inch in wiper size, the length increases by 25mm. Methods for selecting windshield wipers: 1. Wiper type: First determine the specific wiper model your vehicle uses by consulting the owner's manual. 2. Compatibility: Check whether the connection method between the wiper arm and the wiper blade matches your vehicle. Some arms are secured with screws while others use snap-on locks. 3. Inspection: Lift the wiper and run your fingers along the cleaned rubber blade to check for damage and elasticity. If the rubber shows signs of aging, hardening, or cracking, the wiper needs replacement.
18
2
Share

Can the first maintenance of a new car be done at any 4S store?

The first maintenance of a new car can be done at any 4S store. All 4S stores nationwide are interconnected, and the car manufacturer will recognize the validity of the first maintenance regardless of which store performs it. Below is a detailed introduction about the first maintenance of a new car: 1. Time: Since the engine, transmission, and other components of a new car are brand new, to maintain the service life of these parts, it is stipulated that the first maintenance should be done either 3 months after purchasing the new car or when the mileage reaches 5,000 kilometers. 2. Main content: Replace the engine oil and oil filter. Car manufacturers usually add a certain amount of friction modifiers to the engine oil installed in the car to facilitate the smooth running-in of various engine components. Whether the oil is replaced earlier or later than recommended, it is not conducive to the normal running-in of the engine. Therefore, all vehicle brands specify the time for the first maintenance.
17
1
Share

What is the data stream channel number for the Volkswagen throttle?

The data stream channel number for the Volkswagen throttle is 060. Below is a detailed introduction about the throttle: 1. Introduction to the Throttle: The throttle is a controllable valve that regulates the airflow into the engine. There are two types: the traditional cable-operated throttle and the electronic throttle. After entering the intake pipe, the air mixes with gasoline to form a combustible mixture, which then burns to generate power. The responsiveness of the vehicle's acceleration is closely related to the cleanliness of the throttle. 2. Classification of the Throttle: There are two types of throttles: the traditional cable-operated throttle and the electronic throttle. In traditional engines, the throttle control mechanism operates via a cable (flexible steel wire) or a rod, with one end connected to the accelerator pedal and the other to the throttle linkage plate. The electronic throttle primarily uses a throttle position sensor to adjust the throttle opening angle based on the engine's power requirements, thereby regulating the amount of air intake.
11
0
Share

What sound does a faulty tensioner make?

The sound of a damaged tensioner is a buzzing or squeaking noise. The following are symptoms of a faulty tensioner: 1. If the tensioner pulley fails, the engine's timing may skip, causing ignition and valve timing to become disordered. The engine may shake and have difficulty starting, and in severe cases, it may not start at all. If the car does start, it could deform the valves. 2. It is recommended to replace the tensioner pulley immediately. The tensioner pulley mainly consists of a fixed housing, tension arm, pulley body, torsion spring, rolling bearing, and spring bushing. 3. It can automatically adjust the tension according to the tightness of the belt, ensuring the stability, safety, and reliability of the transmission system. 4. The function of the tensioner pulley is to adjust the tightness of the timing belt, but its lifespan is not very long. Many cars experience the tensioner failing before the belt does. Generally, the tensioner pulley is replaced together with the timing belt.
10
5
Share

What is the fuel consumption of the GAC Trumpchi GS8?

The fuel consumption of the Trumpchi GS8 is approximately 9.6L/100Km for the two-wheel-drive version and around 9.9L/100Km for the four-wheel-drive version. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: When starting at low speeds, the car consumes the most fuel. Therefore, gently pressing the accelerator during startup can prevent excessively high RPM and effectively reduce fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Change the engine oil and remove carbon deposits. 4. Avoid sudden braking: Anticipating road conditions in advance not only enhances driving safety but also saves fuel. For example, gradually slowing down before traffic lights and utilizing inertia to coast.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.