Can the CFMoto 250SR carry a passenger?

2 Answers
LaAliyah
07/24/25 5:43am
The CFMoto 250SR can carry a passenger, but due to the lack of passenger-specific design on the rear seat, the safety is not ideal. It is best to avoid carrying passengers. Exterior Design: The sharp front-end design gives the entire face a powerful presence. Beyond the front and rear, the side profile is equally impressive, with smooth lines that convey a sense of stylish beauty. The slightly tapered rear end strongly highlights the rider's understated and unpretentious quality. Handling: The CFMoto 250SR is equipped with a single-cylinder, liquid-cooled engine with a displacement of 249cc. The engine also features electronic fuel injection, delivering a class-leading torque of 22 Nm and achieving a maximum power output of 20.5KW.
Was this review help?
12
3
Share
ClaireFitz
08/11/25 1:24am
I've ridden the CFMoto 250sr several times, and this bike is indeed capable of carrying a passenger, thanks to its spacious rear seat and sturdy rear footpegs. I remember the first time I gave my friend a ride, the bike's stability was quite good, but you need to pay attention to weight distribution to avoid rear wheel slippage or unstable cornering. The engine is 250cc, providing enough power for two people without major issues, though acceleration is a bit slower than when riding solo. Safety-wise, the most crucial thing is to always wear a helmet, and when carrying a passenger, be extra mindful of road conditions to avoid sudden braking or sharp turns. Also, the passenger should hold onto the grab rails firmly, as motorcycles aren't as stable as cars. Maintenance-wise, regularly check tire pressure and the rear suspension system to ensure they can handle the extra weight. All in all, it's a reliable companion suitable for short trips, but not for long distances due to limited seating space.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

How to Deal with Frost on the Windshield?

Here are the methods to handle frost on the windshield: 1. Open the window: Frost forms due to the temperature difference between the cold outside and warm inside. In most cases, especially when the car is full of passengers, the temperature inside is higher, causing frost to form quickly. Opening the window for ventilation allows air to circulate between the inside and outside, reducing frost on the windshield. 2. Turn on the heater: When the vehicle's coolant temperature rises sufficiently, you can turn on the heater and direct the warm air toward the windshield while activating the external air circulation. This helps minimize the temperature difference between the inside and outside of the windshield, effectively removing frost. 3. Wipe with a towel: In winter, after the car has been parked outside overnight, the windshield is often covered with frost. The most effective solution in this case is to wipe and clear the frost with a clean towel. 4. Apply professional anti-fog spray: Professional anti-fog sprays can be directly applied to the windshield, forming a transparent protective film that effectively prevents moisture from condensing on the glass. Typically, one application of such a spray can last for about a week.
19
1
Share

What Causes Occasional Idle Shaking?

Severe engine carbon buildup, ignition system issues, unstable oil pressure, aging engine components, etc. Below are three main causes of idle shaking: 1. Severe engine carbon buildup - This leads to poor engine performance, increased fuel consumption, and even starting difficulties, potentially causing significant long-term damage to the vehicle. 2. Ignition system problems - These cause unstable engine operation, resulting in deteriorated acceleration performance, reduced power output, and poorer fuel economy. 3. Unstable oil pressure - Multiple factors can cause this, including insufficient engine oil, dirty oil, thinned oil, oil pipe leaks, oil pump failure, or excessive wear of pump components.
13
3
Share

How to Solve Excessive Engine Noise?

Engine noise is a common issue that can arise from various sources. Below are the causes and solutions for excessive engine noise: 1. The vehicle engine itself is a primary source of noise, with noise levels varying according to engine speed. Solution: Installing high-quality sound-absorbing foam materials under the engine hood can effectively reduce vibrations caused by the hood and absorb a significant amount of noise, yielding noticeable results. 2. Leaks in the intake or exhaust systems can cause noise. When starting the engine, escaping gases from these leaks create vibrations and noise. Solution: Inspect the intake and exhaust systems and replace any faulty components, such as the exhaust pipe, to eliminate the noise. 3. Tire noise occurs during high-speed driving due to friction between the tires and the road surface. The severity depends on road and vehicle conditions—worse roads produce louder noise, and asphalt versus concrete surfaces also make a difference. Solution: Tire noise is structural noise caused mainly by vibrations. The most effective solution is vibration damping. Adding damping plates along with sound-absorbing mats can significantly reduce road and tire noise. 4. Wind noise happens when the pressure of oncoming wind exceeds the sealing resistance of car doors at high speeds, increasing with velocity. Solution: Install or replace door seals, as rubber seals degrade over time, reducing their noise insulation and sealing effectiveness.
4
0
Share

What are the gear shifting requirements and passing standards for Subject 3 driving test?

Here are the introduction regarding gear shifting requirements and penalty items for Subject 3 test: Gear shifting requirements: Accurate and smooth gear shifting, with appropriate speed matching corresponding gear. Penalty items: (1) Wrong gear selection during startup or driving without timely correction, deduct 10 points; (2) Prolonged mismatch between gear and speed causing excessively high or low engine RPM, deduct 100 points; (3) Looking down at gearshift or failing to engage gear twice consecutively while driving, deduct 100 points; (4) Gear grinding during shifting, deduct 10 points; (5) Failure to smoothly shift up or down as instructed, deduct 100 points;
13
2
Share

What is the normal tire pressure for the Baojun 560?

The normal tire pressure range for the Baojun 560 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. The Baojun 560's tire pressure monitoring data is displayed on the dashboard's LCD screen. The driver can switch to the tire pressure monitoring system display page by rotating the knob on the dashboard left or right, which will show the air pressure of each tire. The Baojun 560 is equipped with a tire pressure monitoring system that automatically monitors the tire pressure in real-time while driving and alerts the driver to tire leaks or low pressure to ensure driving safety. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged while driving, the tire pressure warning light will come on. For sensor damage, the only solution is to replace it with a new part.
19
1
Share

How to Check the Total Mileage on the 10th Generation Accord?

The 10th generation Accord's dashboard features a speedometer on the right and a tachometer on the left. The number before "km" displayed between the speedometer and tachometer indicates the total mileage. Below are the relevant details: 1. The Accord's dashboard is equipped with a maintenance reminder light. When the odometer reaches 9600km-12000km and the ignition is turned on, the maintenance light will illuminate for 2 seconds. If the owner fails to perform maintenance after exceeding 12000km, the maintenance light will flash continuously to remind the owner to service the vehicle promptly. 2. After maintenance, the odometer needs to be reset to zero. Turn on the ignition and press the reset button on the dashboard until the trip meter displays "0". 3. The Accord's dashboard does not have a dedicated maintenance light, but the "MAINTENANCE REQUIRED" indicator on the dashboard serves as a reminder. When the mileage approaches 12000km, this indicator will change from green to yellow. If maintenance is not performed after exceeding 12000km, the indicator will turn from yellow to red.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.