Can the car still move if the clutch plate is broken?

Is Toyota's Hybrid Technology Mature?

Toyota's hybrid technology is relatively mature. Toyota initially applied its hybrid technology in its luxury brand, Lexus. As the automotive market competition intensifies and the cost of hybrid technology decreases, this technology has been extended to various Toyota-branded models across different price ranges, such as the Avalon, Camry, and Leiling. This demonstrates that its hybrid technology is highly stable and mature. Advantages of Toyota's hybrid technology: 1. Stability: Having been in the market for over 23 years, it boasts exceptional stability. A set of test data once showed that compared to a 10-year-old and a brand-new Prius battery, the performance degradation of Toyota's nickel-metal hydride battery is minimal. 2. Reliability: Toyota's nickel-metal hydride battery can withstand temperatures as low as -40 degrees Celsius without any change in battery properties, a feat that other hybrid systems, including lithium batteries, cannot achieve. 3. Energy Efficiency: This hybrid system is specifically designed for urban use. Compared to vehicles of the same displacement, it can save over 3 liters of fuel per 100 kilometers, demonstrating significant fuel efficiency.

10

5

Share

What Causes Hard Braking Due to the Focus Intake Manifold?

Hard braking in a car could be due to a lack of necessary maintenance on the braking system, excessive impurities in the brake master cylinder, poor sealing, failure of the vacuum booster pump, contaminated brake fluid, or the formation of vapor lock when different types of brake fluids are mixed and heated, leakage in the brake master cylinder or wheel cylinders, or air leaks in the air reservoir or pipe connections. Below are the related causes: 1. Leakage or malfunction of the car's vacuum booster pump: The force applied to the brake pedal is amplified by the brake booster pump. If it fails, the braking system loses its main power source. 2. Pressing the brake after the engine is turned off: This is also related to the brake booster pump. The brake booster pump continuously generates vacuum only when the engine is running. When the engine is off, it relies on the residual vacuum stored previously, which typically depletes after a few presses. However, this condition is restored upon engine restart and is not considered a malfunction.

16

2

Share

What are the reasons for the JMC Transit's throttle not accelerating?

Introduction to the reasons for the JMC Transit's throttle not accelerating: 1. Ignition system malfunction: For example, aging ignition coils or spark plugs not replaced for a long time can lead to insufficient ignition energy, poor combustion, weak engine acceleration, and the engine fault light turning on. 2. Fuel system malfunction causing low pressure: Insufficient fuel injection can result in weak engine acceleration. 3. Excessive engine carbon deposits: Leading to poor fuel atomization, which also causes poor combustion, excessive exhaust emissions, and weak engine acceleration. 4. Engine system malfunction: Causing the engine to enter an emergency operation mode, thereby limiting engine power output and resulting in weak acceleration. Examples include engine sensor failures such as oxygen sensors, air flow meters, crankshaft position sensors, knock sensors, etc. Faulty signals from these sensors can cause the engine to enter an emergency operation mode, leading to weak acceleration.

20

3

Share

What are the causes of Cadillac rearview camera failure?

Cadillac rearview camera failure may be caused by the following specific reasons: 1. Gear position is "R": Check whether the gear displayed on the dashboard is "R". If not, it indicates that the transmission module might be damaged, although this is highly unlikely. If it is "R", then the transmission module is not damaged, and there are two possibilities. One is that the module or switch on the gear shift mechanism is damaged, resulting in no image. The other possibility is that the camera is damaged or obstructed by something, leading to no image. 2. When in "N" gear: The display should not show the "R" gear image but rather the main interface of the radio or audio system. 3. Wiring damage: Wiring damage can be resolved by replacing the wires.

18

3

Share

Is the Golf a B-segment car?

The Golf is not a B-segment car; it is an A-segment car. According to the German car classification standards, A-segment cars (including A0 and A00) refer to small cars, B-segment cars are mid-range cars, and C-segment cars are premium cars. The classification is mainly based on parameters such as wheelbase, engine displacement, and weight. The further the letter in the alphabet, the longer the wheelbase, the larger the displacement and weight, and the higher the luxury level of the car. The specific differences are as follows: 1. A-segment cars: Divided into A00 and A0 cars, where the A00 segment has a wheelbase between 2 meters and 2.2 meters and an engine displacement of less than 1 liter. For example, the Alto belongs to the A00 segment. 2. B-segment mid-range cars: The wheelbase is approximately between 2.45 meters and 2.6 meters, with a displacement ranging from 1.6 liters to 2.4 liters. Currently, the size and engine displacement of mid-size cars have increased. 3. C-segment premium cars: The wheelbase is approximately between 2.6 meters and 2.8 meters, with an engine displacement of 2.3 liters to 3.0 liters. The most famous C-segment car in China is undoubtedly the Audi A6. 4. S-segment cars: Represented by the Mercedes-Benz S-Class, these are the highest-level cars in the Mercedes-Benz lineup. The Mercedes-Benz S-Class is the top luxury car introduced by the German Daimler Group's brand Mercedes-Benz, representing the ultimate in luxury and prestige.

15

1

Share

What are the disadvantages of modified blow-off valves?

Modified blow-off valves are usually installed externally and do not provide any improvement to the car's power. They also generate significant noise and may develop leaks over time. Below is a detailed introduction to blow-off valves: 1. Blow-off valves automatically open and close based on the system's working pressure and are typically installed on equipment or pipelines in closed systems to protect system safety. 2. When the pressure inside the equipment or pipeline exceeds the set pressure of the blow-off valve, it automatically opens to relieve pressure, ensuring that the medium pressure remains below the set level to protect the equipment and pipeline and prevent accidents. 3. Blow-off valves can be categorized into several types, including intake blow-off valves and exhaust blow-off valves, with the latter further divided into internal and external types.

20

5

Share

Can the car still move if the clutch plate is broken?

Is Toyota's Hybrid Technology Mature?

What Causes Hard Braking Due to the Focus Intake Manifold?

What are the reasons for the JMC Transit's throttle not accelerating?

What are the causes of Cadillac rearview camera failure?

Is the Golf a B-segment car?

What are the disadvantages of modified blow-off valves?

Has Baojun Ceased Production?

What is the reason for the Volkswagen Front Assist system being unavailable?

How many kilometers can an Emgrand run on a full tank of gas?

Why Did Fiat Completely Halt Sales?