Can the car still be driven if the water temperature rises while driving?

1 Answers
AsherMarie
07/29/25 3:35am
Continuing to drive when the water temperature rises can easily damage the engine, and in severe cases, major repairs may be required. The reasons for the increase in water temperature are as follows: 1. Insufficient coolant: Coolant leakage or insufficient coolant can cause the engine water temperature to rise. 2. Cooling fan failure: When the vehicle is running at high speed, the heat generated cannot be transferred to the antifreeze in time, affecting heat dissipation, which then leads to an increase in the temperature of the antifreeze, causing boiling and other issues. 3. Circulation water pump failure: Pump failures include bearing seizure and impeller damage. Bearing seizure is relatively rare, while impeller damage commonly involves impeller cracking or the impeller loosening from the pump shaft, leading to slower coolant circulation and easily causing engine overheating. 4. Thermostat failure: The thermostat automatically adjusts the amount of water entering the radiator based on the coolant temperature, changing the water circulation range to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within the appropriate temperature range. If the thermostat fails, the car's cooling system may not perform a large circulation, leading to an increase in water temperature. 5. Poor radiator heat dissipation: Using water as a medium for a long time can cause rust in the engine and radiator, leading to poor radiator heat dissipation and high water temperature.
Was this review help?
3
4
Share
More Forum Discussions

What does the Audi emergency braking warning system indicate?

Audi emergency braking warning system may appear due to reasons such as damaged warning system sensors, radar system failure, or issues with the warning control system. Below are detailed explanations: 1. Audi Basic Occupant Protection System: Tightens seat belts and allows reversible adjustment of front seat belts; If vehicle control is insufficient or excessive, windows and sunroofs close leaving only a small gap; Activates hazard warning lights. The Audi Basic Occupant Protection System is activated when the vehicle speed exceeds 30 km/h. 2. Audi Front Occupant Pre-Safe System: The Audi Front Occupant Pre-Safe System includes all functions of the Audi Basic Occupant Protection System. Additionally, it calculates the possibility of rear-ending the vehicle ahead under system constraints. When a collision risk is detected, the following devices are triggered: Adjusts the electric headrests, head restraints, and pneumatic side bolsters on the front and outer rear seats.
17
3
Share

How to Install a License Plate?

The method for installing a license plate is as follows: On the front and rear of the car, you can see fixed points where the license plate is to be mounted. All fixing screw components must be tightened without any gaps. Once the license plate is in the correct position, tighten all the screws, but do not apply excessive force. The screws should not come loose and should be firm with slight pressure. Align the cap with the spacer and press it inward, applying slight pressure to secure the cap in place. Note that once the screws and caps are fixed, they cannot be removed. License Plate Introduction: License plates, commonly known as vehicle plates, refer to the plates hung on the front and rear of a vehicle. License Plate Materials: The commonly used materials are aluminum, iron, plastic, or paper, on which the vehicle's registration number, registration region, or other relevant information is engraved.
20
4
Share

How Many Years Is a New Car Exempt from Inspection?

New cars fall under the 6-year inspection exemption policy. However, according to national regulations, owners still need to visit the vehicle management office every 2 years to apply for an annual inspection sticker. Failure to obtain this sticker is equivalent to not having the vehicle inspected. Certain documents are required to apply for the exemption. For private vehicles over 10 years old, the original inspection cycle still applies: once a year for vehicles aged 10 to 15 years, and every six months for vehicles over 15 years old. According to the opinions on strengthening and improving motor vehicle inspection work issued by the Ministry of Public Security and the General Administration of Quality Supervision, Inspection and Quarantine, non-operational passenger cars and other small and mini passenger vehicles within 6 years are exempt from inspection on a trial basis. The exemption policy applies to non-operational passenger cars and other small and mini passenger vehicles, excluding vans and vehicles with 7 or more seats. If an operational motor vehicle passes the safety technical inspection within the specified inspection period, it does not need to undergo a repeat safety technical inspection.
20
2
Share

What procedures need to be completed after paying off the car loan?

After paying off the car loan, you need to complete the vehicle release of mortgage procedures. When purchasing a car with a loan, the "Motor Vehicle Registration Certificate" (commonly known as the green book) is mortgaged to the lending institution, while the vehicle itself and the vehicle license remain in the owner's possession. Many people mistakenly believe that simply repaying the loan is sufficient, but in reality, it's necessary to visit the lending institution to complete the release of mortgage procedures and retrieve the green book. The materials required for the vehicle release of mortgage procedures include: 1. Vehicle Registration Certificate; 2. Original "Motor Vehicle Mortgage Registration or Pledge Filing Application Form" with the mortgagee's official seal; 3. Identity documents and copies of both the vehicle owner and the mortgagee; 4. Power of attorney from the mortgagee with an official seal.
5
4
Share

What is the simplest formula for calculating fuel consumption?

The relatively simple formula for calculating fuel consumption is: fuel consumption per 100 kilometers equals the volume of fuel consumed (in liters) divided by the distance the car can travel on that amount of fuel (in kilometers) multiplied by 100. For example, if a car consumes 4 liters of fuel to travel 50 kilometers, its fuel consumption per 100 kilometers would be calculated as 8 liters, commonly referred to as "8 liters per 100 km". Factors affecting fuel consumption: The fuel consumption per 100 kilometers of a car is not fixed. Different road conditions, load capacity, temperature, and whether the air conditioning is on all affect fuel consumption. Things to note: When refueling in urban areas, it is not advisable to fill the tank completely because city driving often involves frequent stops and starts. A full tank can increase the engine's load, resulting in weaker acceleration and higher fuel consumption.
10
2
Share

What to Do If You Forget Your Driver's License Under the 2020 New Traffic Regulations?

Under the 2020 new traffic regulations, you can present your ID card if you forget your driver's license. Nowadays, many traffic police officers carry a device to check the identity of vehicle owners during inspections. This device can scan all information in the vehicle owner's information system just by using their ID card, including whether the owner has any criminal record or a driver's license. If you encounter a traffic police inspection and don't have your driver's license with you, there's no need to panic. Fleeing the scene would be classified as a serious traffic violation. As long as you cooperate with the traffic police and provide your ID card, it should suffice. However, it's still best to carry your driver's license with you while driving.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.