Can the car still be driven if the water temperature reaches 130 degrees?

2 Answers
ElenaLee
07/24/25 7:10am
No. Normally, the temperature of a vehicle's radiator while driving should remain between 80 and 90 degrees. A temperature of 120 degrees is significantly higher than the normal level. Continuing to drive under such conditions may cause the engine block to deform, emit white smoke from the front, and ultimately lead to complete engine failure. Below are detailed relevant information: Introduction: To maintain the engine within a normal temperature range for proper operation, a "water cooling" system is used to cool the engine promptly, which involves adding coolant. Choosing high-quality coolant is a "must-learn lesson" for every car enthusiast, as it helps extend the engine's lifespan and ensures driving safety. Main reasons: Generally, the choice of coolant can be based on the climate of the region where the car is located or according to the recommendations in the car's manual. Under special circumstances, in weather above zero degrees, water can temporarily replace coolant for a short period. However, this should not be done for an extended time, as it may result in poor engine cooling and cause damage.
Was this review help?
4
4
Share
VonJoshua
08/11/25 2:54am
Hey, I've been driving for almost twenty years and have seen plenty of cases of overheating. Never push it if the temperature gauge hits 130 degrees! The engine's normal operating temperature usually ranges between 90 and 105 degrees—anything beyond that is as dangerous as a high fever. Continuing to drive can cause the coolant to boil, hoses to rupture, or even lead to severe engine damage like warped cylinder heads or a burst radiator. I remember one time my neighbor ignored the overheating warning, and the car broke down on the road, costing thousands in engine repairs. If this happens, immediately find a safe spot to pull over, turn off the engine, and let it cool for at least half an hour. Then check if the coolant level is low or if the radiator fan is malfunctioning. If the temperature stays high, get it towed to a repair shop ASAP. Make it a habit to regularly top up coolant and inspect the water pump and hoses—don’t risk major damage for minor neglect. Safety first!
Was this review help?
1
3
Share
Expand All
More Forum Discussions

How to reset the maintenance light on a Volvo S40?

Method to reset the maintenance light on a Volvo S40: First, ensure the car is turned off. Then, insert the key directly to the first position, press and hold the reset button on the dashboard while turning the key to the second position. Wait until the numbers on the dashboard flash and you hear a beep sound, indicating the reset is complete. The Volvo S40 has dimensions of 4467mm in length, 1770mm in width, and 1454mm in height, with a wheelbase of 2640mm, and features front-engine, front-wheel drive. In terms of power, this car is equipped with a 2.0L engine, paired with a 6-speed dual-clutch transmission. The actual engine displacement is 1999ml, with 4 cylinders arranged in an L formation. The engine's maximum power speed is 6000 rpm, and the maximum torque speed is 4500 rpm.
1
5
Share

When Should the Spark Plugs on the Tiguan Be Replaced?

The spark plugs on the Tiguan should be replaced every 30,000 kilometers or 4 years. As a part of the ignition system, the main function of the spark plugs is to introduce the high-voltage electricity from the ignition coil into the engine cylinder, generating sparks between the electrode gaps to ignite the air-fuel mixture, thereby enabling the engine to perform work. The Tiguan is positioned as a compact SUV. Taking the 2017 Tiguan as an example: its body dimensions are 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm. In terms of power, the 2017 Tiguan is equipped with a 1.8T inline 4-cylinder turbocharged engine, paired with a 6-speed automatic transmission, delivering a maximum power of 118kW and a maximum torque of 250Nm.
4
2
Share

Where is the Citroen C-Quatre's cabin air filter located?

The cabin air filter of the Citroen C-Quatre is located behind the insulation cotton in the engine compartment. After removing the three fasteners above and taking off the insulation cotton, you will see the cabin air filter cover. The function of the car's cabin air filter is to ensure that as little unfiltered air as possible enters the cabin. It can absorb harmful substances and moisture in the air, and filter solid impurities such as dust, pollen, and grinding particles. The Citroen C-Quatre is a compact car under the Citroen brand. In terms of body dimensions, its length, width, and height are 4556mm, 1773mm, and 1486mm respectively, with a wheelbase of 2610mm. The Citroen C-Quatre is equipped with a photosensitive adaptive combination dashboard, which uses translucent data display. The driving panel includes all necessary information such as speed. The dial layout is very sensitive to light capture, and the display contrast can be quickly adjusted according to the light to provide clear information.
11
4
Share

What is the gear shifting method for the old Santana?

The gear shifting method for the old Santana is: The gear lever has markings, and to engage reverse gear, you need to press the gear lever downward. Other gears can be operated according to the markings. The Santana is a compact car under SAIC Volkswagen, with body exterior dimensions of 4475mm and 4282mm in length, 1706mm in width, 1469mm and 1489mm in height, and a wheelbase of 2603mm. The Santana is equipped with a 1.5L naturally aspirated engine, with an L-type engine cylinder arrangement, and is paired with a 5-speed manual transmission and a 6-speed automatic transmission. Its suspension system features a MacPherson strut independent front suspension and a compound torsion beam non-independent rear suspension.
11
4
Share

Where is the fan relay located in the Santana?

Santana's fan relay is located beneath the engine. The automotive air conditioning control circuit contains various types of relays, whose function is to control different components to perform various functions while reducing the current flowing into control switches, thereby extending switch lifespan. Generally, relays are categorized into normally open and normally closed types. In terms of appearance, the new Santana doesn't have many highlights. Its overall design is relatively simple, without exaggerated lines. The waistline running from front to rear gives the body a strong sense of tension. The chrome trim below the windows is simple yet aligns with Chinese consumers' aesthetic preferences, providing some enhancement to the vehicle's perceived quality.
8
4
Share

How to adjust the seat of an old Santana?

The method to adjust the seat of an old Santana is: 1. Pull up the car handbrake, move the seat height adjustment lever up and down, at which point the seat will move vertically. Adjust until there is appropriate space between your head and the car roof, and ensure your line of sight is not too low. 2. Move the seat height adjustment lever forward and backward, at which point the seat backrest will move horizontally. Adjust until your right leg can remain bent and still be able to exert downward force. The Santana is a brand car produced by Volkswagen in California, USA, with dimensions of 4437mm in length, 1706mm in width, and 1469mm in height, and a wheelbase of 2603mm. The high-end models of this car include features such as electrically heated seats, side airbags, and side curtain airbags.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.